August Wireless Presenter Computer User Manual

August Wireless Presenter Computer
User Manual

Thank you for purchasing the August LP315 Wireless Presenter for Computer. This user manual is designed to familiarise you with all the features of this device. Please take the time to read this user manual carefully, even if you are already familiar with a similar product.

SafetyTo ensure the safely of yourself and others, please read the Safety Instructions before using this device. Please do not disassemble the LP315 as it can be unsafe and will invalidate the manufacturer’s warranty.

DisposalPlease ensure the product and accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations applicable to your country. Always check with the environmental agency and any other relevant authorities for current disposal regulations.

Declaration of ConformityThe Declaration of Conformity can be found on our website at http://augustint.com/en/declaration/

Customer ServiceYou can contact us by phone on: +44 (0)845 250 0586 or by email at: [email protected] should you require further technical support or customer service.

Safety Instructions

Storage and Use

Maintenance

Please unplug all connection wires before cleaning this machine.

Warning

1. Laser radiation2. Class 2 laser product3. Do not view directly with optical instruments4. Do not point at people and animals5. Please keep out of reach of children

Main Features

■ Plug and Play for Computer Power Point Presentation■ Remote Page Changer and Red Laser■ Air Mouse and Vibrating Alarm.■ Internal Storage for USB Signal Receiver■ Operating Range: upto 10m■ Compatible with Windows 10, 8, 7, Vista, XP, 2000, 98 & Mac OS

Box contents

Part Names and Functions

  1. Laser emitter
  2. LCD display
  3. Laser buttonPress and hold to light the laser.
  4. Page up/ Start slideshowPress it to go to the previous page.Press and hold it for 2 seconds for start or stop the slideshow.
  5. Page down/ Black screenPress it to go to the next page.Press and hold it for 2 seconds for enter or exit the black screen.
  6. Note buttonIn slideshow, press and hold it to make notes on the screen.Double press it to delete the notes.
  7. Air mouse switchDouble press it to switch the air mouse on or off. The mouse icon will appear on the screen when the air mouse mode is on.When the air mouse mode is on, press and hold it to control the cursor by hand movement.
  8. Left buttonPress it for left click function.
  9. Right buttonPress it for right click function.Press and hold it to enter or exit the setting mode.
  10. USB charging port
  11. USB receiver
  12. Reset

Installation

Plug the USB receiver into a USB port on your computer. The system will automatically search for the new hardware and complete the installation.

Operation

Settings

LP315 allows you to set clock and alarm time.

  1. Press and hold ·R” button for 2 seconds to start adjusting the alarm time. The LCD will display the icon, “00:00” appears.
  2. Press “page up” or “page down” to select which digit to change, press “note button” or “air mouse” to adjust the flashing digit.
  3. Press the laser button to save the alarm time, or press R to cancel.
  4. Press and hold ·R” for 4 seconds to enter clock setting. The LCD will display the icon.
  5. Press “page up” or “page down” to select which digit to change, press “note button” or “air mouse” to adjust the flashing digit.
  6. Press the laser button to save the clock time, or press “R” to cancel.
Alarm

Once the alarm has been set, the device will remind the user by vibrating when there are 10, 5 and 0 minutes remaining. After the alarm time has passed, the icon will disappear.

Charging

This device contains a built-in Lithium rechargeable battery. The battery level shows on the LCD screen. When the power is low, connect the micro USB lead to the device’s power socket, and the other end of the USB cable to a powered USB port. The battery icon on the LCD flashes, charge time is approximate 2-3 hours, and the battery icon will stay constant once battery fully charged.

Note:

  • If LCD displays battery level low, the control distance will decrease, please charge the device in time.
  • Please only use USB chargers with genuine safety certification.

Specifications

Warning:Laser radiationClass 2 laser productDo not view directly with optical instrumentsDo not point at people and animalsPlease keep out of reach of children

Note:Please note, these instructions are only intended for reference.August International Ltd reserves rights to revise the product specifications, features and design without notice.

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of conformity may be consulted online at http://www.augustint.com/en/declaration.

August International LtdUnited KingdomTelephone: +44 (0) 845 250 0586Email: [email protected]Web: www.auguslinl.com

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,