Aukey Anker Soundcore Liberty Air 2 User Manual

Anker Soundcore Liberty Air 2

Product specification

Product number : Anker Soundcore Liberty Air 2Drive unit : 6mm Diamond Coated Screwdriver*2Bluetooth version : 5.0Audio decoding : SBC、AAC、aptXBattery capacity : Charging compartment 500mAh, earphone 55mAh*2Endurance : 28 hours / 7 hours per earThe number of times the charging compartment recharges the headset : About 4thCharging Time :Charge for 1.5 hours, support Qi wireless charging;Fast charge function: charge for 10 minutes, listen for 2 hoursWeight : 4.2g per ear, 36g charging compartment

Instructions

Bluetooth pairing

  1. After taking out both ears, wait for the right ear to flash white light quickly and the left ear to flash white light slowly
  2. Turn on the phone’s Bluetooth pairing “Soundcore Liberty Air 2”(You must wait another 3-5 seconds, another window will pop up, click to pair “Soundcore Liberty Air 2-L” Only completed)
  3. Single ear mode: Both left and right ears can be switched directly without re-pairing put one ear back into the charging compartment, it will be in monaural mode, take it out again, it will change back to binaural mode
  4. A small step: After opening the charging compartment, press the rear circular button for 3-5 seconds, and wait for the right ear to flash white light quickly.To re-pair the device directly

Reset method

  1. Delete the device pairing record on the phone
  2. Put the headset back in the charging compartment and close it and wait for 5 seconds
  3. After opening the charging compartment, press the round button behind the charging compartment for 10 seconds
  4. Until the headset flashes red 3 times, the reset is successful and you can re-pair

Instructions

  1. Switch on/off : take out/return to the charging compartment;Long press for 2 seconds to turn on, long press for 8 seconds to turn off
  2. Adjust the volume : APP or connected device
  3. Switch tracks : tap the left ear twice → next
  4. Play/pause, answer/hang up : tap the left/right ear twice
  5. Reject the call : Long press the left/right ear for 2 seconds (The above operations are all preset by the original factory, and the demo opportunity may be different due to changes during the trial period)
  6. Soundcore APP : can change button functions, adjust EQ and HeardID
  7. Charging compartment power display : one light flashing is <30%, one light is on and one light is flashing for 30%-70%, Two lights are on and the third light is flashing at >70%, and all lights are on at 100%

Aukey Anker Soundcore Liberty Air 2 User Manual – Aukey Anker Soundcore Liberty Air 2 User Manual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by