AUKEY Magnetic Wireless Earbuds
Thank you for purchasing the AUKEY EP-B56 Magnetic Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.
Package Contents
- Magnetic Wireless Earbuds
- Micro-USB Cable
- Three Pairs of Ear-Tips (S/M/L)
- Three Pairs of In-Ear Ear-Hooks (S/M/L)
- Carrying Pouch
- User Manual
- Quick Start Guide
- Warranty Card
Specifications
| Model | EP-B56 |
| Technology | BT 5, A2DP, AVRCP, HFP, HSP |
| Chipset | QCC3003 |
| Driver (Each Channel) | 6mm / 0.24” speaker driver |
| Speaker Sensitivity | 92 ±3dB SPL (at 1kHz/1mW) |
| Speaker Frequency Range | 20Hz – 20kHz |
| Speaker Impedance | 16 ohm ±15% |
| Microphone Type | MEMS (microphone chip) |
| Microphone Sensitivity | -42dB ±3dB (0dB = 1V/Pa at 1kHz) |
| Microphone Frequency Range | 100Hz – 10kHz |
| Input | DC 5V |
| Charging Time | 1.5 hours |
| Battery Life | Up to 8 hours |
| Battery Type | Li-Polymer (2 x 60mAh) |
| Operating Range | Up to 10m / 33ft |
| Weight | 15g / 0.53oz |
Product Diagram
Getting Started
Charging
Fully charge your earbuds before first use. Before charging, make sure the earbuds are turned off. To charge, simply connect one end of the Micro-USB cable to a USB charging port, and the other end to the input port on the earbuds. When the blue LED indicator light turns on, your earbuds are fully charged and ready for use. Charging takes around 1.5 hours.
Turning On / Off
| Turn On | Press and hold the multi-function button for 2 seconds until the LED indicator flashes blue and red. You will hear an ascending tone |
| Turn Off | Press and hold the multi-function button for 3 seconds until the LED indicator flashes blue and red. You will hear a descending tone |
Pairing
Starting with the earbuds powered off:
- Press and hold the multi-function button until the LED indicator flashes blue and red alternately
- Turn on BT on the device that you want to pair with the earbuds
- In the list of available devices, find and select “AUKEY EP-B56”
- If a code or PIN is required for pairing, enter “0000”
Simultaneous Pairing with Two Devices
- Follow the instructions in the “Pairing” section to pair the earbuds with Device A.
- Once paired, turn off BT on Device A and turn off the earbuds
- Follow the instructions in the “Pairing” section to pair with Device B
- Once paired with Device B, reactivate BT on Device A and select “AUKEY EP-B56” in the list of paired devices
- You can now make and receive calls from either of the two paired devices
Notes:
- To clear the pairing list, power on the earbuds and then hold volume + and volume – simultaneously for 5 seconds until the LED indicator displays red and blue. Once the pairing list is cleared, you’ll hear a tone and the earbuds will automatically enter pairing mode
- The earbuds will automatically shut down after 5 minutes in pairing mode if no devices are paired
- If your paired device is turned off or manually disconnected, the earbuds LED indicator will flash blue once every second and the earbuds will shut down after 5 minutes
- The maximum wireless operating range is 33ft (10m). If you exceed this range, the earbuds will disconnect from your paired device and you’ll hear a tone. The connection will be re-established once you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous “Pairing” steps
Music and Calls Control
Streaming AudioOnce paired, you can wirelessly stream audio from your device to the earbuds. Music will automatically pause when you receive an incoming phone call and resume once the call has ended.
| Play or pause | Press the multi-function button |
| Adjust volume | Press volume + / – |
| Skip to next / previous track | Press and hold volume + / – for 2 seconds |
Making Calls
Once paired with your device, making and answering phone calls can be managed via the in-line control panel.
| Answer or end a call | Single-press the multi-function button. If there’s a second incoming call, press the multi-function button to answer the second call and end the first call; or press and hold the multi-function button for 2 seconds to answer the second call and put the first call on hold. Press and hold the multi-function button for 2 seconds to switch between these two connected calls |
| Reject an incoming call | Press and hold the multi-function button for 2 seconds |
| Switch mic | During a call, double-press the multi-function button to switch voice input between the microphone on the earbuds and your phone |
| Use Siri or other voice assistants | When your device is connected, double-press the multi-function button in standby mode. You’ll hear a tone and your device’s voice assistant will be activated |
| LED Indicator | Status |
| Blue & red flashing alternately | Pairing mode |
| Blue flashing once every second | Standby mode / Disconnected |
| Blue flashing once every 5 seconds | Connected / Playing music / In call |
| Red flashing | Low battery |
| Red | Charging |
| Blue | Fully charged |
FAQ
The earbuds are on but not connecting to my deviceFor the earbuds and your device to establish a connection, you need to activate pairing more in both. Please follow the instructions in the “Pairing” section of this manual.
I’ve established a connection with my smartphone but I can’t hear any soundDouble-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before audio can be transmitted. If you’re using a media player or other device, make sure it supports the A2DP stereo music profile.
The sound isn’t very clear or the caller can’t hear my voice clearlyAdjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range-related issues.
What’s the wireless range of the earbuds?The maximum range is 33ft (10m). However, the actual range will depend on environmental factors. For optimal performance, keep your devices connected with the earbuds within a 15ft–25ft (4.5m–7.5m) range and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your devices.
The earbuds won’t turn onTry charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the address below.
Product Care & Use
- Keep away from liquids and extreme heat
- Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.
Amazon US orders: [email protected]Amazon EU orders: [email protected]Amazon CA orders: [email protected]Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.
FCC Information for Users
Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CE StatementMax RF power level:BT classic (2402–2480MHz): 2.1dBmRF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.Excessive sound pressure from earphones and headphones can cause hearing loss.
References
[xyz-ips snippet=”download-snippet”]