Avantree Portable Wireless Car Kit User Manual

Table of Contents

Avantree Portable Wireless Car Kit

Overview

What’s in the box?

A. Avantree Bluetooth receiverB. 3.5mm extension cableC. USB charging cableD. User manual / Quick user guide

Basic operations

Component	Function	Operation
Power Switch	Power On/Oﬀ	Slide to ON/OFF position
MFB	Pairing mode	Press and hold for 2 seconds until the LED ﬂashes Blue and Red alternately
Manually re-connect	Press once
Answer/End a call	Press once
Reject a call	Press and hold for 1 second
Redial	Double click
Voice dial (phone feature)	Press and hold for 1 second
Play/Pause	Press once
V+	Volume Up	Long press
V-	Volume down	Long press
V+	Next track	Press once
V-	Previous track	Press once

Pairing and connecting

Step 1Release 3.5mm plug (press button on top). (Note: to retract plug, press and hold button to release lock).

Step 2Plug the Avantree Bluetooth CK210 into the 3.5mm port of car stereo then turn CK210 ON.Step 3Press and hold the MFB for 3 seconds to enter pairing mode( Note: On first use the CK210 will automatically enter pairing mode).

Step 4Activate Bluetooth on your phone – search for new devices.

Step 5Select “Avantree CK210” on your phone.

Note:Once paired and connected, it will auto re-connect the next time.

Multi-point: pairing 2 phones simultaneously

Step 1 Connect the first phone (instructions above) then turn off its Bluetooth function.Step 2 Set the CK210 into pairing mode again.Step 3 Turn on Bluetooth on the second phone and connect with the CK210.Step 4 Reboot the CK210 by turning it off then on again. Turn on the Bluetooth on the first phone.Both phones will now be connected to the CK210.

Clear pairing history

You may need to reset the CK210 if it is not working as expected. When reset to its factory default settings, all the paired device information will be erased.

Step 1 Set the CK210 to PAIRING MODE – press and hold the MFB for 3 seconds until the LED flashes BLUE and RED alternately.Step 2 Double click the MFB – the BLUE and RED LEDs will turn on for 1 second to indicate a successful reset. Then it will automatically enter pairing mode

How to charge

When the battery runs low, the RED LED will flash every 2 seconds. Recharge the CK210 by plugging it into a USB car charger (not supplied) or PC USB port using the supplied charging cable. It normally takes 1.5 hrs to fully charge the battery. The LED will indicate red when charging and turn off when charging is completed.Charging requirements: DC5.0V/ 500mA-1A.