- MaualsCenter

Table of Contents

AXESS PABT6040 12” Portable LED Trolley Speaker User Manual

For correctly operating, please read this manual carefully before using.Any content revise of the manual won’t declare again, and we are not responsible for consequence cause by fault or oversight of this manual.

TO CUSTOMERS

Thank you for your support and trust on purchasing the products of our company. To fully exert the function of the product, we suggest you to read the operating instruction carefully before using it, for the convenience of grasping the connection method and using points.Please take care of the operating instruction after reading it for the purpose of further reference.

SPECIFICATIONS

12” Bluetooth Trolley LED Speaker
1.5” Tweeter
10M Bluetooth range
Brilliant LED lights
TF card slot, AUX and USB input
FM Radio function
Microphone input
Wireless microphone Included
Echo/Bass Adjustments
400W (PMPO) Output power
7.4V/3600mAh battery capacity
9V/1.5A Charge
Small remote control included
Frequency Response: 50Hz-20kHz

REMOTE CONTROL FUNCTION

Power Switch: Press this switch turn on and off the speaker
Mode Selector: Press this button tot switch between USB, TF, FM and bluetooth inputs
Repeat Track: tap this button to single tuen repeat
EQ mode switching
Previous FM Stabtion (CH-): When using the speaker in FM mode, press this button to got to the previous stored FM station
Next FM Station (CH+); When using the speaker in FM mode press this button to go to the next stored FM station
Previous Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
Next Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
Pause & FM scan: Press this button to pause the signal from the USB drive TF Card or Bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations.
VOLUME –
VOLUME +
Number buttons (0-9)

REAR PANEL FUNCTION LAYOUT

LED Lights Power Button: Press this button to turn on and off the front LEDs
Insert Microphone to front panel MIC jack, adjust MIC Vol and Echo to best level
AUX input: Connect your smartphone, mp3 player, laptop or other audio device to this input
Microphone Priority: when the microphone priority is activated, speaking into the MIC will automatically lower the other audio signal 20db. When the two speakers are switched t bluetooth mode, press the TWS function button on any Axess device for 3-5 seconds to begin the TWS matching state, then the two speakers will be automatically paired and connected. When the is heard, the matching is successful, and the LED screen has a display prompt.
Mode Selector / Recording: Press this button to switch between USB, TF and Bluetoot inputs. Press and hold for 3-5 seconds to begin recording onto the USB drive or TF card
Repeat Track: Tap this button to single tune repeat
Previous Track / Previous FM Station (CH-): When using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track. When using the speaker in FM mode, press this button to go to the prevoius stored FM station
Play/Pause & FM Scan: Press this button to pause the signal from the USB flash drive TF card or bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations. Each station will be stored. Press the CH+ and Ch – to choose a station.
Next Track / Next FM Station (CH+): When using the speaker in USB / TF card & bluetooth mode, press this button to go to the next track. When using the speaker in FM mode, press this button to go to the next stored FM station.
USB Flash Drive Input: Insert your USB flash drive. The unit will only read mp3, wav, wma files from the USB flash drive. The maximum storage size of the USB flash drive cannot exceed 32GB. Do not attempt to connect a computer to the USB input as the speaker will not be abel to connect to a computer.
USB/TF Display screen: the elapsed time adn format will appear on this display screen for the USB/TF card inputs
TF input: Insert your TF card into this slot. The unit will only read mp3, wav, wma files from the TF card flash drive cannot exceed 32GB
Power Switch: press this switch turn on and off the speaker. Before powering on the speaker make sure the volume levels are turned down to prevent damage to the amplifier or speakers
DC Charging Port: Insert the charging adapter into the DC9V input port on the rear of the unit. When the battery is charging this indicator will illuminate. When the battery is fully charged the indicator will turn off.
Main Volume Knob: use this knob to adjust the volume USB/TF/BTL/FM music.
Treble Knob: Use this knob to adjust the treble levels.
Bass Knob: Use this knob to adjust the bass levels.
Microphone Volume Knob: Use this knob to adjust the microphone volume levels.
Microphone Echo Knob: Use this knob to adjust the microphone echo levels.