AXESS PABT6038 8” Bluetooth LED Speaker

For correctly operating, please read this manual carefully before using.Any content revise of the manual won’t declare again, and we are not responsible for consequence cause by fault or oversight of this manual.

TO CUSTOMERSThank you for your support and trust on purchasing the products of our company. To fully exert the function of the product, we suggest you to read the operating instruction carefully before using it, for the convenience of grasping the connection method and using points.Please take care of the operating instruction after reading it for the purpose of further reference.

SPECIFICATIONS

  • 8”+1.5” Bluetooth Party Speaker
  • Front Control Panel
  • 10M bluetooth range
  • brilliant LED light
  • USB and AUX Inputs
  • FM Radio function
  • Microphone input
  • Bass & Treble Adjustments
  • Microphone Echo/ Bass Adjustments
  • TWS Link+ (True Wireless Stereo)
  • 400W (PMPO) Output power
  • 7.4V/3600mAh battery capacity
  • DC 5V Charging port Remote control and wired microphone included

REMOTE CONTROL FUNCTION

  1. Power Switch: Press this switch turn on and off the speaker
  2. Mode Selector: Press this button tot switch between USB, TF, FM and bluetooth inputs
  3. Repeat Track: tap this button to single tuen repeat
  4. EQ mode switching
  5. Previous FM Station (CH-): When using the speaker in FM mode, press this button to got to the previous stored FM station
  6. Next FM Station (CH+); When using the speaker in FM mode press this button to go to the next stored FM station
  7. Previous Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
  8. Next Track: when using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track.
  9. Pause & FM scan: Press this button to pause the signal from the USB drive TF Card or Bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations.
  10. VOLUME –
  11. VOLUME +
  12. Number buttons (0-9)

REAR PANEL FUNCTION LAYOUT

  1. LED Lights Power Button: Press this button to turn on and off the front LEDs
  2. Insert Microphone to front panel MIC jack, adjust MIC Vol and Echo to best level
  3. AUX input: Connect your smartphone, mp3 player, laptop or other audio device to this input
  4. Microphone Priority: when the microphone priority is activated, speaking into the MIC will automatically lower the other audio signal 20db. When the two speakers are switched to bluetooth mode, press the TWS function button on any Axess device for 3-5 seconds to begin the TWS matching state, then the two speakers will be automatically paired and connected. When the is heard, the matching is successful, and the LED screen has a display prompt.
  5. Mode Selector / Recording: Press this button to switch between USB, TF and Bluetooth inputs. Press and hold for 3-5 seconds to begin recording onto the USB drive or TF card
  6. Repeat Track: Tap this button to single tune repeat
  7. Previous Track / Previous FM Station (CH-): When using the speaker in USB/TF card & bluetooth mode, press this button to go to the previous track. When using the speaker in FM mode, press this button to go to the prevoius stored FM station
  8. Play/Pause & FM Scan: Press this button to pause the signal from the USB flash drive TF card or bluetooth inputs. When using the speaker in FM mode, press this button to auto scan for all available stations. Each station will be stored. Press the CH+ and Ch – to choose a station.
  9. Next Track / Next FM Station (CH+): When using the speaker in USB / TF card & bluetooth mode, press this button to go to the next track. When using the speaker in FM mode, press this button to go to the next stored FM station.
  10. USB Flash Drive Input: Insert your USB flash drive. The unit will only read mp3, wav, wma files from the USB flash drive. The maximum storage size of the USB flash drive cannot exceed 32GB. Do not attempt to connect a computer to the USB input as the speaker will not be able to connect to a computer.
  11. USB/TF Display screen: the elapsed time and format will appear on this display screen for the USB/TF card inputs
  12. TF input: Insert your TF card into this slot. The unit will only read mp3, wav, was files from the TF card flash drive cannot exceed 32GB
  13. Power Switch: press this switch turn on and off the speaker. Before powering on the speaker make sure the volume levels are turned down to prevent damage to the amplifier or speakers
  14. DC Charging Port: Insert the charging adapter into the DC9V input port on the rear of the unit. When the battery is charging this indicator will illuminate. When the battery is fully charged the indicator will turn off.
  15. Main Volume Knob: use this knob to adjust the volume USB/TF/BTL/FM music.
  16. Treble Knob: Use this knob to adjust the treble levels.
  17. Bass Knob: Use this knob to adjust the bass levels.
  18. Microphone Volume Knob: Use this knob to adjust the microphone volume levels.
  19. Microphone Echo Knob: Use this knob to adjust the microphone echo levels.

PromptWhen people sleep, they need a quiet environment.Please turn off music or turn off the power while sleeping.

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,