WHERE CREATIVITY &TECHNOLOGY MEETPABT6021Double 6.5” LEDBLUETOOTH SPEAKER

For correctly operating, please read this manual carefully before using it.Any content revise of the manual won’t declare again, and we are not responsible for consequences caused by fault or oversight of this manual.

TO CUSTOMERS

Thank you for your support and trust in purchasing the products of our company. To fully exert the function of the product, we suggest you read the operating instruction carefully before using it, for the convenience of grasping the connection method and using points. Please take care of the operating instruction after reading them for the purpose of further reference.

PANEL BUTTONS

Mode: Short press for switching among Bluetooth, TF card, USB, Line-in, FM Long press for LED lights ON/OFF

: Play the previous music under Bluetooth, TF card, and USB mode, Play previous radio station under FM mode

: Short press for music play/pause Long press for radio station automatic searching under FM mode

: Play to next music under BT, TF, and USB mode Play next radio station under FM mode

AUX: aux-in jack can connect the speaker to any PC, mp3, mobile phone, etc OFF/ON: switch for powering OFF or ON the speakerUSB Port: Support USB and can play MP3 and WAV format music in U disk TF Card Port: support TF card and can play MP3 and WAV format musicMIC: plug-in for wired microphone

OPERATING BLUETOOTH MODE

• After the power is turned ON, press the “MODE” button to enter into Bluetooth mode. Check to see if “Bluetooth” appears on the display screen to affirm you’re on the right mode.
• Turn on your mobile device and put it in Bluetooth mode, search for the device name “PABT6021” and confirm the connection when it appears
• Once the pairing is successful, the speaker will emit a beep tone

OPERATING AUX MODE

• Plug one end of the 3.5mm audio cable into the speaker’s AUX jack, and the other end to your mobile device (cellphone, laptop, tablet, etc)
• Control your music from the play/pause or forward/backward buttons on the speaker panel or directly from the mobile device.

OPERATING LED FUNCTION

• Press and hold the ‘MODE’ button to turn ON or OFF the LED display lights

OPERATING TWS FUNCTION

• Begin by using your mobile device to successfully pair one of 2 Bluetooth speakers on Bluetooth mode.
• When pairing is successful, move on to the second speaker. Make sure that speaker #2 is on Bluetooth mode as well and double click the “PLAY/PAUSE”  button to turn on its TWS mode.
• If both speakers are close to each other while pairing, they should quickly connect together and begin to play your music simultaneously.

CHARGING

• Take the USB charging cable and plug it into the DC 5V charging port. And charge it directly into a wall plug or into a computer USB port to charge
• To make sure your speaker is being charged, look for the charging indicator located on the right side of the LED screen. It will light up when charging and will stop lighting up when the speaker is fully charged.

NOTE:When a speaker is not in use please turn off the device to conserve battery life.Make sure to turn down the volume when you turn off the device so you can maintain the speakers’ (sub)woofer in good condition. This way you are less like to burn out or damage the device.

ATTENTION!FOR THE FIRST TIME USEFULLY CHARGE THE DEVICE UNTIL THE LIGHT INDICATOR TURNS OFF AS INSTRUCTED IN THE MANUAL. This can take up to approximately 8 hours to fully charge. If you don’t, the device will not function at full capacity.

PromptWhen people sleep, they need a quiet environment.Please turn off the music or turn off the power while sleeping.

This symbol indicates to the user that the machine with risk of electric shock

report this ad

This symbol indicates to the user that the machine with the important operation and maintenance instruction

Axess Products Corporation6649 Valjean Ave. Van Nuys, 91406Tel. 818-785-4000 Fax. 818-785-5081 [email protected]Questions? Comments? Contact us at [email protected]© 2018 Axess Products Corporation. All rights reserved.