AXESS SPBT1082 Bluetooth Media Speaker User Manual

AXESS SPBT1082 Bluetooth Media Speaker

For correctly operating, please read this manual carefully before using. Any content revise of the manual won’t declare again, and we are no responsible for consequence caused by fault or oversight of this manual

FEATURES:

  1. 1.1CH Outdoor bluetooth speaker:
  2. Output very clear sound and heavy bass, dynamic sound effect;
  3. With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device such as your mobile phone, notebook, iPhone or iPad;
  4. Secure simple pairing for user-friendly operating;
  5. 10 meters operating range;
  6. With USB supporting;
  7. With FM radio, AUX Line-in function, suitable for PC, MID, TV and other audio device;
  8. Built-in rechargeable battery 3000mAh;
  9. With handle, easy to take out.

ACCESSORIES:

  • Charging cable,
  • Audio cable,
  • User manual.

SPECIFICATIONS:

  • Tweeter Size: 1.4 inch
  • Tweeter output: 2W, 4Ω
  • Subwoofer Size: 4inch
  • Subwoofer output: 18W, 4Ω
  • Battery Capacity: 3000mAh
  • Frequency Response: 100-20Khz
  • Power supply: DC 5V
  • Play time (max volume) : 3hours

INSTRUCTION FOR APPEARANCE AND KEY:

  1. PREVIOUS /volume down
  2. Equalizer
  3. USB Charger Port
  4. USB Input
  5. AUX Input
  6. ON/ OFF Switch
  7. Mode (Switch Bluetooth, USB disk, FM and AUX-IN state )
  8. NEXT/ Volume up
  9. Play/Pause

Bluetooth:

  1. Turn the power button to “ON”.
  2. Activate Bluetooth of mobile phone and search for device name “SPBT1082” then connect it. The blue RGB light will twinkle slowly and beep third times when connection is successful.
  3. Play the music from your mobile phone and enjoy.
  4. Short press PREVIOUS or NEXT button on the speaker unit or on mobile device to select songs you like.
  5. Press Play/Pause button on the speaker unit or on mobile deivce to play or stop the music.
  6. Long press PREVIOUS or NEXT button to adjust volume up and down. Or adjust the mobile phones’ volume.

Playing music from USB disk & AUX Line-in:

  1. Turn the Power button to “ON”, the RGB light should turn on.
  2. Insert USB flash disk into slot or plug-in device through the AUX-Input, the music stored will be played automatically and blue LED light always stay lit.
  3. Under playing mode, short press PREVIOUS or NEXT button to select songs you like, long press to adjust the volume.
  4. Press Play/Pause to play or pause.
  5. Please turn the Power button to “OFF” while not in use.

Remark: Under Bluetooth playing mode, insert USB will disconnect the Bluetooth and switch the playing from USB. You can press the MODE button to switch to Bluetooth mode again.

FM Radio:

  1. Under FM radio state, the audio cable provided treat as antenna. Please insert the audio cable to get the best FM signal before using.
  2. Turn the power button to “ON”, press the “MODE” button to switch to FM radio state.
  3. Under playing mode, short press “Play/Pause” button to auto search the FM Channel and store it automatically.
  4. Press PREVIOUS or NEXT button to change the stored FM channel.

AUX-IN:

For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux Input” of this speaker unit. Then press the “MODE” button to switch to AUX-IN state. Enjoy…When using an external device, all functions will be controlled by the external device.Remarks:

1. Press the MODE button to switch the different modes, the order is Bluetooth, USB disk, FM radio and AUX-IN.2. Turn the power button to “off” to cut off the power supply while without use.

How to charge:

  1. The charger is not included in the accessories. Please use the universal 5V/1A charger to charge this device. Put the provided charge cable into the charging jack, connect the other end to the charger, the charging indicator beside the LED screen will keep lighting.(When playing music during charging, please put the volume to middle, because for some music with heavy bass, the charger may can not afford the high current temporarily under the maximum volume)
  2. Charge time should be 3-5 hours. When charging full, the indicator light will switch off.
  3. To prolong the life of the battery, DO NOT CHARGE CONTINUOUSLY FOR LONGER THAN 8 HOURS.

[xyz-ips snippet=”download-snippet”]


Posted

in

by