Axis JS7000K 7 Inch Monitor & Camera Kit Instruction Manual
SPECIFICATIONS
JS7000 MONITOR
- TFT Panel: New Grade A LCD
- LCD Size: 178mm (7-Inch) Diagonal
- Display Format: 16:9
- Resolution: 800 x 480
- Brightness: < 500 CD/M2
- Viewing Angles: 70° Left/Right/Up/Down
- Video System: Auto PAL/NTSC Select
- Video Connect: 2 x 4-Pin (Female)
- Reverse Trigger: Camera 2 Only
- Monitor View: Normal/Mirror Image Select
- Buttons: Illuminated
- Guidelines: Selectable On/Off (Camera 2 Only)
- Audio: On Board Speaker
- Menu: OSD
- Main Menu: Brightness/Contrast/Colour/Volume/ Guidelines (On/Off)/Reset/Language
- Operating Temp: -20°C to +70°C
- Power Input: 10-32V DC (Negative Ground)
- Dimensions: 180W x 122H x 28D mm (excluding bracket)
- Finish: Matt Black Rubber, Matt Metal
- Included: U-Shape Mount, Remote Control, Power Cable Assembly, Sunshade
CAMERA
- Image Sensor: 1/3” Sony CCD
- Auto Lens: f2.9mm
- Electronic Shutter: Auto
- Diagonal Viewing Angle: 120°
- Horizontal Viewing Angle: 90°
- Signal System: PAL
- Resolution: 700 TV Lines
- Sync System: Internal
- Orientation: Mirror Image
- Night Vision: Yes, 18 LED
- Illumination: 0 Lux with IR on
- Ingress Protection: IP67
- Operating Temperature: -20°C ~ +70°C
- Dimensions: 70W x 45H x 60D mm (Excl Bracket)
- Connection: Terminated 4-Pin Male
- Power Supply: 12V DC (From Monitor)
- Included: 15m 4 Pin (Male) to 4 Pin (Female) Extension Cable, Mounting Bracket, Sunvisor
Optional: Glass Mount Bracket (BKT101)
CONTENTS
- 7” TFT LCD Monitor
- Removable Sun Hood
- U Type Monitor Bracket
- Power/AV Loom
- IR Remote Control
- IR 1/3 SONY CCD Camera with Sun Hood and Bracket
- 15m AV Cable
- Mounting Screws
- Allen Key
MENU
- Brightness
- Contrast
- Colour
- Volume
- Zoom (Aspect Ratio)
- TCON (Screen orientation)
- ACC Time (Delay time on Trigger)
- Parking Guidelines (On/Off)
- Lang (Language)
- Reset (Factory Reset)
UP and DOWN key to change Volume or Settings(Audio dependant on camera type)
POWER – Turns on/off monitor
CAM – Selects AV1 or AV2
L/R – Mirror image Left/Right
MODE – Preset Screen Brightness
NOTE: Monitor will display a black screen if it gets no video signal
REMOTE CONTROL
SPECIFICATIONS
MONITOR
- Display: Colour TFT-LCD
- Size: 7” (Diagonal)
- Aspect Ratio: 16:9 / 4:3
- Resolution: 800 x 480 x RGB
- System: PAL/NTSC/AUTO AV
- Channels: 2 (4 Pin Aviation)
- Power: 9-32Volts DC
- Connector Plug: Male Screw Plug
- Mounting Bracket: Metal U type
- Buttons: Illuminated
- Operating Temp: -20℃ to +70℃
- Trigger Delay: Yes
- Remote Control: Yes (IR)
- OSD Menu: Yes – Audio: Yes
Camera
- Sensor: 1/3 SONY CCD
- Sensitivity: 0 Lux with IR
- Electronic Shutter: Auto
- Lens: f 2.9mm
- AGC: Auto
- Power: 12 volt DC
- Operating Temp: -20°C to +70°C
- Protection: IP67
- Plug: 4 Pin Aviation
- Audio: No
AV CABLE
- Length: 15m
- Connector Type: 4 Pin
Specifications may be subject to change without notice.
CONTENTS
4 Pin Configuration
Definition: Monitor Connector Front View
MONITOR & CAMERA SET UP
- Place the U bracket in the position desired with the monitor installed and check for obstructions. Do not obscure driver’s view. Do not mount near airbags. Remove monitor and fix U bracket.
- Place the monitor back in the U bracket and fix using the provided screws.
- Adjust the angle as required by up to 30 degrees each way.
CAMERA
- . Install the camera in a position that offers the best view. Test the view before fixing and check for correct orientation. Protect from damage and excess water spray.
- Seal all connectors from water with tape. Allow for water drip loops in cable.
- Fix cable securely.
OPTIONAL ACCESSORIES
Matching Second Camera
Centre License Plate Camera
Side Cameras, ideal for blind spots
Front Facing camera
Trailer Connection AV/Power Cables
INCLUDING ACCESSORIES
- Remote control 1x
- User manual 1x
- Power cable
- Sun shade 1x
- Bracket Accessories 1x
National Service Centre:10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148AustraliaTelephone: (02) 8841 9000 Fax: (02) 9636 1204email: [email protected]
References
[xyz-ips snippet=”download-snippet”]