JAPAN QUALITY
APS401W12124V Wireless Parking Sensor System
WIRING DIAGRAM
The two outer sensors start detecting at Zone B.
TECHNICAL SPECIFICATION
| DESCRIPTION | MIN | SPEC | MAX |
| Power voltage (V DC) | 10 | 35 | |
| Operating current (mA) | 150 | ||
| Operating temperature °C | -20 | 80 | |
| Operating frequency (kHz) | 39.3 | 40.7 | |
| Horizontal detection angle | 120° | ||
| Vertical detection angle | 60° | ||
| Distance detection accuracy (cm) | 10 | ||
| Detection range (m) | 0.05 | 2.5 | |
| Buzzer sound volume (dB) | 75 | 105 |
DETECTION ZONES
| DISPLAY | SOUND |
| ZONE A: 1.5 – 2.5m | ZONE A: 1.5 – 2.5m |
| Number Only | None |
| ZONE B: 1 – 1.5m | ZONE B: 1.2 – 1.5m |
| Green | 2 beeps per second |
| ZONE C: 0.5 – 1m | ZONE C: 0.9 – 1.2m |
| Amber | 3 beeps per second |
| ZONE D: 0 – 0.5m | ZONE D: 0.6 – 0.9m |
| Red | 4 beeps per second |
| ZONE E: 0.3 – 0.6m | |
| 5 beeps per second | |
| ZONE F: 0 – 0.3m | |
| Constant tone |
SENSOR
18.8mm Rubber Angled Sensor
UNDER MOUNTS
Under-Mount Brackets and Spacers
DISPLAY
FEATURES
- Wireless range up to 30m.
- Towbar / Spare Wheel detection zone.
- Suitable for flush mounting into metal bumpers and underbody/tray mounting.
- System Self-Checking Function – On start-up, the system will beep twice;If there is any faulty sensor, the system will beep once.
- IP69K Control Box & IP68 Sensors and Connectors.
- E-Mark certified.
TROUBLE-SHOOTING GUIDE
| PROBLEM | CAUSE |
SOLUTION |
| The system fails to start when the reverse gear is engaged | Wrong connection of power lead | Check the power lead |
| Wrong jack connection | Check the connectors | |
| The system always detects the same distance | The sensor detects the ground | Check and adjust the vertical sensor angle |
| The system fails to detect the obstacles | Wrong sensors connection | Check and reset the system |
| False alarm | The sensor detects the ground | Check and adjust the vertical sensor angle |
SPECIAL NOTES
 |
When the car approaches a smooth slope, the slope may not be detected. |
 |
The sensors may not detect a small or smooth round pole. |
 |
Point A will be detected prior to point B, as it comes closer. |
 |
However, point A may fall into the sensors’ blind zone, and point B cloud is misjudged as the closest point. |
 |
The sensors may not detect any sponge-like material obstacle as the ultrasonic wave was absorbed. |
 |
Complex situation: point A may not be detected. |
SPECIFICATIONS
| GENERAL | |
| – Detection Range: | 0.05- 2.5m |
| – Rated Voltage: | 12/24V DC |
| – Operating Range: | 9-32V DC |
| – Operating Current: | 12V |
| LED DISPLAY | |
| #NAME? | Visual Direction & Indicators |
| – Audiable Buzzer: | Yes |
| – Mute Function: | Yes |
| – Buzzer Cable Length: | 1.5m |
| – Dimensions: | 99Wx 20H x 28Dmm |
| CONTROL BOX | |
| #NAME? | IP69K |
| – Wireless Range: | Wireless Range: Up to 30m |
| – Ignore Function: | Towbar / Spare Wheel |
| – Power Leads: | 1.4m |
| SENSORS | |
| – Sensor Type: | Angled Rubber |
| – Sensor Size: | 18.8mm |
| – Sensor Dimensions: | 26W x 26H x 24.5Dmm |
| – Sensor Cable Length: | 2.5m |
| – Sensor Installation: | Under Mount or In-Bumper Mount |
| – Detecting Distance: | 0.05-2.5m |
| – Ultrasonic Frequency: | 40KHz |
| – Working Temperature: | -20° to +80C |
| #NAME? | IP68 |
| – Under Mount Dimensions: | 65W x 30H x 24.5Dmm |
| INCLUDES | |
| Control Box | |
| 4xSensors | |
| 4 x Bracket with Pads | |
| 4 x 2.5 Sensor Cable | |
| Wireless Display | |
| Drill Bit |
WARRANTY
Congratulations on your purchase of a quality Mobile Safety System! You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty.This warranty covers faults through component failure or failure of the product to operate in accordance with published specifications. Product failure as a result of reasonable environmental conditions, accident, misuse, improper installation, unauthorized repair, vehicle electrical or wiring faults or neglect etc, will not be covered by thiswarranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss or use of this product or any form of consequential loss.CONSUMER WARRANTYThis product is warranted by AudioXtra Pty Ltd to be free from defects in materials and workmanship under NORMAL USE for a period of TWENTY FOUR MONTHS from the date of purchase.WITHIN 30 DAYS OF PURCHASE DATE:Please return the unit for a replacement to our National Service Centre or the Retailer from where you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.AFTER 30 DAYS OF PURCHASE DATE:Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorized center concerned with this repair. This proof should take the form of either:a) The warranty card accompanying this product, stamped and dated by the dealer.b) A Tax Invoice or Receipt showing full details of the original vendor, purchaser, model number, and serial number.COMMERCIAL WARRANTYA product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal commercial application is one where usage, dust, vibration, heat/cold, and other environmental conditions exist at an extreme level.Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.Please complete the details below in the event of warranty service being required.
| Purchaser’s Name: | |
| Purchaser’s Address: | |
| Model Number: | APS401W |
| Dealer Name: | |
| Serial Number: | |
| Date of Purchase | |
| Dealer Address: | |
| Invoice/Sales Docket no: | |
| General Hints: To expedite service and prompt return of the equipment, please: | |
| a) Clearly describe the fault in detailc) Include your return address | b) Safely and securely pack the unit for transportd) Provide proof of purchase date as outlined above |
report this adNational Service Centre:10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 AustraliaTelephone: (02) 8841 9000 Fax: (02) 9636 1204email: [email protected]
PTY LT Daudioxtra.com.au
References
[xyz-ips snippet=”download-snippet”]