axis JS5020K 5 Inch Monitor and Camera Kit Instruction Manual

axis JS5020K 5 Inch Monitor and Camera Kit


  1. Do not try to open the covers.
  2. Please disconnect the power if anomolies occur.
  3. Do not use organic solvents on the surfaces to avoid damage to the coating.
  4. Do not apply force to the wiring leads to avoid internal damage.
  5. Keep the product away from high dirt/dust enviroments, direct high temperature sun light and high humidity conditions.
  6. Install the product so that it does not fall down.
  7. Follow wiring diagram strictly or warranty will be voided and can result in damage to the vehicle’s electrical system.
  8. Do not change functions while driving.
  9. Comply with the operating temperature of this unit.


PowerAV          Input Select–              Volume & Menu DOWN FunctionM            MENU+            Volume + Menu UP FunctionCH1       Camera Input 1CH2       Camera Input 2CH3       Camera Input 3

  1. Power on
  2. Mute
  3. Horizontal mirror/Normal image
  4. Vertical Flip/Normal image
  5. Volume down
  6. Volume Up
  7. Menu
  8. Analog Increase
  9. Analog decrease
  10. Mode
  11. Guide Lines
  12. 16:9/4:3
  13. Timer (0~240mins)
  14. AV Switchover
  15. Reset

Menu Operation Instruction

Press “MENU”, the screen will show “PICTURE”



  1. U-Bracket Installation
  2. Adjust the angle as required.


MONITORTFT Panel: New Grade A LCDLCD Size: 5-Inch DiagonalDisplay Format: 16:9Resolution: 800 x 480Brightness: < 450 CD/M2Viewing Angles: 70° Left/Right/Up/DownVideo System: Auto PAL/NTSC SelectVideo Connect: 3 x 4-Pin (Female)Reverse Trigger: Yes, Each InputMonitor View: Normal/Mirror Image SelectButtons: IlluminatedGuidelines: Selectable On/OffAudio: On Board SpeakerMenu: OSDOperating Temp: -20°C to +70°CPower Input: 12-32V DC (Negative Ground)Dimensions: 132W x 95H x 26D mm (excluding bracket)

CAMERAImage Sensor: 1/3” Sony CCDAuto Lens: f2.9mmElectronic Shutter: AutoVertical Viewing Angle: 120°Horizontal Viewing Angle: 90°Signal System: PALResolution: 700 TV LinesSync System: InternalOrientation: Mirror ImageNight Vision: Yes, 18 LEDIllumination: 0 Lux with IR onIngress Protection: IP69KOperating Temperature: -20°C ~ 70°CDimensions: 70W x 45H x 60D mm (Excl Bracket)Connection: Terminated 4-Pin MalePower Supply: 12V DC (From Monitor)Extention Cable: 15m 4 Pin Male to 4 Pin Female


  • U-Shape Mount
  • Power Cable Assembly
  • Sunshade
  • Remote Control(Optional Glass Mount Bracket BKT102)

HEAVY DUTY CAMERA15m 4-Pin (Male) to 4-Pin (Female) Extension CableMounting BracketSunvisor


Congratulations on your purchase of a quality Mobile Safety System! You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty.This warranty covers faults through component failure or failure of the product to operate in accordance with published specifications. Product failure as a result of unreasonable environmental conditions, accident, misuse, improper installation, unauthorised repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product or any form of consequential loss.

CONSUMER WARRANTYThis product is warranted by AudioXtra Pty Ltd to be free from defects in materials and workmanship under NORMAL USE for a period of TWENTY FOUR MONTHS from the date of purchase.

WITHIN 30 DAYS OF PURCHASE DATE:Please return the unit for replacement to our National Service Centre or the Retailer from where you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.

AFTER 30 DAYS OF PURCHASE DATE:Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorised centre concerned with this repair. This proof should take the form of either:a) The warranty card accompanying this product, stamped and dated by the dealer.b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model number and serial number.

COMMERCIAL WARRANTYA product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at an extreme level.Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Please complete details below in the event of warranty service being required.

Purchaser’s Name:Purchaser’s Address:Model Number:Dealer Name:Dealer Address:Invoice/Sales Docket no:Serial Number:Date of Purchase: / /

General Hints: To expedite service and prompt return of the equipment, please:a) Clearly describe the fault in detailb) Safely and securely pack the unit for transportc) Include your return addressd) Provide proof of purchase date as outlined above

National Service Centre:10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 AustraliaTelephone: (02) 8841 9000 Fax: (02) 9636 1204email: [email protected]

report this ad


[xyz-ips snippet=”download-snippet”]