BACK BAY Runner 60 Wireless Running Earbuds, Over Ear Hooks User Manual
1-Year Warranty
Thank you for purchasing theRunner 60 wireless earbuds!You are covered by our 1-Year WarrantyRegister for your free warranty at:www.backbaybrand.com/warrantyIf you have any issuesplease feel free to email:[email protected]
How to Power On/Off
- To power on, remove the earbuds from the case or hold the “B” buttons on each earbud for 3 seconds
- To power off, place the earbuds in the case or hold the “B” buttons for 5 sec
- If the case is totally out of battery, the earbuds won’t turn off automatically
Pairing for the First Time
- Remove the protective plastic from the bottom of the earbuds
- Place the earbuds in the charging case until you see a white light
- Remove both earbuds from the charging case and they will automatically turn on and connect to eachother
- Go to the Bluetooth menu on your device and only select “Runner 60 R” (do not select “60 L”)
- If your phone shows a Bluetooth Pairing Request, press “Pair”
If the earbuds don’t connect to eachother, please follow the directions on the next page 
Fixing a Connection Issue
- Open your phone’s bluetooth settings, find “Runner 60 R” and “Runner 60 L” and click “Forget This Device” for both
- Place your earbuds in the charging case
- Tap both “B” logos, then press and hold both logos for 5 full seconds until you see 3 flashing lights.
- Remove the earbuds from the case
- Then you should see “Runner 60 R” as a discoverable device in your phone’s Bluetooth menu “Don’t select “Runner 60 L”
If you don’t see it in your Bluetooth menu, turn your phone’s Bluetooth off and on again
Pairing Only One Earbud
Right Earbud
- Remove only the right earbud from the charging case (or hold the “B” button on the right earbud to turn on)
- If you have connected before, the earbud should automatically connect
- If it does not automatically connect, select “Runner 60 R” in your device’s Bluetooth menu
Left Earbud
- Remove only the left earbud from the charging case (or hold the “B” button on the left earbud to turn on)
- Select “Runner 60 L” in your device’s Bluetooth menu to connect
After you have paired the left earbud once, it should automatically connect when you turn on the left earbud again
Bass Mode
To turn Bass Mode on, triple-tap the “B” logo on the right earbud.
To turn Bass Mode off, triple-tap the “B” logo on the right earbud again
2 Beeps = Bass Mode On1 Beep = Bass Mode Off
3 TAPS
Controls
Pause/PlayTap Either “B” OncePower On/OffPress and Hold “B” for 5 Seconds
Phone Calls
Answer/End CallTap Either “B” OnceReject Incoming CallDouble-Tap Either “B”
Positioning
Place the earphone in your ear with the hook going over your ear. Rotate the earbud until you find a comfortable position
Choose the Right Ear-Tip
GREAT FIT = GREAT BASS
If you are having trouble putting on the tips, go to the site below for help: backbaybrand.com/eartips
How to Charge
Charging the Earbuds
- Simply place the earbuds in the charging case (Make sure they are not wet)
- When the earbuds are charging, a white light will shine on the earbuds
- When the earbuds are fully charged, the light will turn off
- The case will recharge the earbuds 9 full times
Charging the Case
- Locate the USB-C cable included in the accesory box, and plug it into the back of the case
- Or place the case on a wireless charging pad
Do not use a charger that exceeds 5V 1A. A higher-powered charger may damage the battery.
Charging Status
The LED lights on the front of the case will blink to show the battery status when you plug in the case or place the earbuds in the case
Specifications
- Bluetooth Version: 5.0
- Profiles Supported: APTX, HFP, HSP, AVRCP
- Microphone Features: CVC Noise Cancellation
- Supports Cellphone Voice Assistants
- Wireless Range: 10m
- Battery Capacity:o Earphones: 60 mAho Dock: 1200 mAh
- Earphone Playtime: Up to 8 Hours
- Total Playtime with Charging Case: 80 Hours
- Charging Time: About 2 Hours
- Frequency Range: 20 Hz – 20 kHz
References
[xyz-ips snippet=”download-snippet”]