HEAVY-DUTY GATE WHEELEPN-51821
Installation Instructions
Read all instructions prior to installing the product.Refer to manufacturers’ safety instructions when operating any tools.
To register your product, please visit: barretteoutdoorliving.com
WARNING:
- Improper installation of this product can result in personal injury. Always wear safety goggles when cutting, drilling and assembling the product.
- Incorrect installation may cause harm to the gate or individual.
- Not pool code approved.
NOTICE:
- DO NOT attempt to assemble the kit if parts are missing or damaged.
- DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
TOOLS NEEDED:
Gate |
Pencil |
Drill |
7/32″ Drill Bit |
Nuts & U-bolts 2″ ID 5/16″ (if installing on round uprights) |
Component List:
QTY | Description |
1 | Heavy-Duty Gate Wheel |
4 | 5/16″ Lag Screws |
To obtain and review a copy of the warranty please visit barretteoutdoorliving.com. You may also contact us at1-800-336 2383 or email Cs.[email protected]
1.Mark Location:a. Position the gate wheel at the desired location.b. Mark screw locations (Fig. 1).
2.Installation:a. Pre-drill with 7/32″ drill bit in 4 marked locations (Fig. 2).b. Attach gate wheel bracket to the gate with provided screws (Fig. 3).
NOTE: If installing on a round chain link, U-bolts & nuts will need to be purchased separately and added to the gate wheel bracket.
Barrette Outdoor Living545 Tilton Rd, Egg Harbor City, NJ. 08215barretteoutdoorliving.com • (800) 336-2383REV 3.21
References
[xyz-ips snippet=”download-snippet”]