Bartovaction PPA01V100 / PPA03V100 / PPA02V100 Test Strip
Bartovaction
Bartovation® Peracetic Acid (PAA) Test Strips, 0-50, 0-160, and 0-500 ppmFood service producers and suppliers rely on Bartovation® PAA Test Strips to facilitate product compliance and lower quality control costs. The most economical way to reliably test the strength of PAA solutions, these strips are available in three different ranges:
PPA01V100 [0-50 ppm] Instantly measures the concentration of PAA residuals on surfaces and food products. It can be used to test residuals simply by wetting the test pad at the end of the strip with distilled water & pressing against the skin of the fruit, vegetable or poultry. The strip reacts immediately with a sensitivity of 2.5 ppm.
PPA03V100 [0-160 ppm] Instantly measures the concentration of PAA from 0-160 ppm, a common range of sanitizing for vegetable and fruit production. Distilleries nationwide also make use of this popular test.
PPA02V100 [0-500 ppm] Instantly tests PAA solutions from 0-500 ppm and, among its many uses, is ideal for ensuring compliance with HACCP (Hazard Analysis Critical Control Point) food and safety regulations.
All products are
- Proudly made in the USA
- Packaged in moisture wicking bottles, which ensure the strips remain accurate during their shelf life
- Designed to provide results instantly, eliminating wait time
- Highly economical! Our customers realize savings as much as 40% vs. competitors test strips, with more than double the strips per vial than most competitors
Technical Information
- Packed in moisture-wicking, flip-top bottle
- Labels include color chart, lot number and expiration date
- Strip dimensions are 2.5″ x .1875″ [64mm (L) x 5mm (W)]
Instructions for all Bartovation Peracetic Acid Test Strips:Remove test strip from vial (note: do not touch the test pad with your fingers) Dip the test strip into solution being tested for two seconds Remove test strip from solution and shake off any excess liquid Wait ten seconds and match test pad with color chart
[xyz-ips snippet=”download-snippet”]