BASS JAXX HP-0333 Swing Wireless Charging Bluetooth Headphone Instruction Manual

INSTRUCTION MANUAL

 Introduction

Congratulations, and thank you for choosing the Swing Wireless Headphones. This manual will help you operate the Platinum Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Platinum Wireless Headphones.Safety Rules

1. Please follow the rules depicted in this manual closely to ensure your safety. Before using these Bluetooth headphones, we would strongly encourage you to read through this user manual.
2. Be warier of any edges, uneven surfaces, metal parts, accessories, and packaging so as to prevent any possible injury or damage.
3. Do not modify, repair or dismantle these Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of these Bluetooth headphones, etc. All are not covered under warranty.
4. Do not use a diluent or volatile liquid to clean the Bluetooth headphones.
5. Do not use Bluetooth headphones in a hazardous location.

Packaging Contents

Connection Diagram

How to use

4.1.General Functions

4.2. Pairing to Mobile phone or another deviceTo use your Bluetooth headphones, you must first pair your headphones with a mobile phone or another Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range.

Pairing to a phone and Entertainment:

• Turn on your phone and ensure the Bluetooth function is activated.
• Turn on the headphones, enter the pairing mode.
• Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more
• After a few seconds, the phone will list the “BT SWING HP” as a discovered device. Select it and follow your phone’s instructions to select this pairing.
• Your phone will confirm the pairing and then press Yes/OK.

4.3. Charging your HeadphonesMethod 1For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.Use the Micro USB charging cable accessory provided with these headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at1 in the headphones diagram on page 2.Connect the USB plug to a USB port on a computer or wall adapter to activate charging.

**Make sure to keep the headphones charging for a minimum of 2 hours before initial use.

Warning:

• You must select a qualified charger from a regular manufacturer.
• You must charge the Bluetooth headphones if it has not been used for more than 6 months.

Method 2You can also charge your headphones by wireless charging pad as below way.

*Wireless charging pad is not included*

Product Specification

FAQ

1. Why is there no power even when the headphones are turned on?Ans: Ensure the battery has been charged for up to 1 hour for initial use.
2. There is no sound when playback.Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again.Make sure the headphones are paired and connected with your target phone or another master device.

FCC Statement

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference.(2)This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.RF warming statement:The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Safety instructions for the lithium battery and charging the product-The input voltage to the product is 5V 1A.-In order to charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product.-Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.-Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose to sunlight or throw into fire.-Switch off the product after use.-Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.-In extreme cases, abuse or misuse of the Lithium battery packs can lead to explosions, heat generation, fire development, or smoke development.

FCC ID:2ADM5-HP-0333

Item#HP-0333

report this ad

Made in China

Distributed by 1616 Holdings, Inc.701 Market Street, Suite 200Philadelphia, PA 19106Keep All Relevant Information For Future Reference