Bat-Caddy Electric Golf Caddy User Manual

Bat-Caddy Electric Golf Caddy

ATTENTION: Please follow all assembly instructions. READ the instructions carefully to understand the operating procedures BEFORE you operate your caddy.

PACKING LIST

X4 Classic, X4 Sport

  • Caddy Frame with front wheel
  • 2 Rear Wheels (Left & Right)
  • 1 Battery Pack (Battery, Bag, Leads)
  • 1 Charger
  • 1 Tool Kit
  • Operational Instructions
  • User Manual, Warranty, Terms & Conditions

X4R, X4 Pro

  • 1 Caddy Frame with front wheel
  • 1 Anti-Tip Wheel & Pin
  • 2 Rear Wheels
  • 1 Battery Pack, SLA or LI (Battery, Bag, Leads)
  • 1 Charger
  • 1 Tool Kit
  • 1 Remote Control (X4R Only) (2 AAA Batteries included)
  • Operational Instructions
  • User Manual, Warranty, Terms & Conditions

Standard Accessories (X4Pro & X4R)

  • 1 Scorecard Holder
  • 1 Cup Holder
  • 1 Umbrella Holder

Additional accessories available for purchase at www.batcaddy.com

NOTE:This device complies with part 15 of the FCC Rules and with Industry Canada license-exemptRSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Bat-Caddy X4RFCC ID: QSQ-REMOTEIC ID: 10716A-Remote

PARTS GLOSSARY

ASSEMBLY INSTRUCTIONS

X4 Series
  1. Unpack all items carefully and check inventory. Place frame structure (one piece) on soft clean ground to protect the frame from being scratched.
  2. Attach rear wheels to axles by pushing the wheel locking button (Pic-1) on the outside of the wheel and inserting the axle extension in to the wheel. Make sure to keep the spring clip (PIC-2) on the outside of the wheel depressed during this process, in order to enable the wheel to be inserted fully onto the axle sprocket. If you have inserted the wheel correctly onto the wheel when you release the spring clip it will lock onto a groove on the end of the axle. If not locked properly, the wheel will not be connected to the axle and will not be propelled! Test the lock by trying to pull the wheel out.
  3. The X4 Classic & X4 Sport caddies have a specific right (R) and a left (L) wheel (Pic-3), as seen from behind in driving direction. Please make sure that the wheels are assembled on the correct side, otherwise the clutches will not engage. To disassemble the wheels, proceed in reverse order.Note: The X4 Pro & X4R rear wheels are interchangeable. They fit on either side.
  4. Erect Frame by unfolding and connecting the main frame tubes together at the two frame locks. On the lower frame lock screw (Pic-2) make sure the middle frame piece sets securely against the lower frame so the screw line up with the threaded insert. One the upper locking screw (Pic-3) you have a range of adjustment to the height depending on your preference.
  5. Proceed in reverse for folding the caddy.
  6. Place the battery pack on the battery tray. Insert the 3-prong battery plug into the caddy outlet so the notch aligns properly and attach T-connector onto the battery. (SLA Battery lead is attached to battery) Then attach Velcro strap. Tightly fasten the Velcro strap underneath the battery tray and around the battery. It is recommended that you DO NOT fasten the screw on the plug to the outlet, so in case of tip-over, the cable can unplug from the socket. Attach optional accessories, such as Scorecard/Beverage/Umbrella holder, below the handle. Instructions provided separately. X4R Only Unpack remote control and install batteries with plus and minus poles as indicated in the diagram in the battery compartment of the unit..Note: BEFORE CONNECTING makesure that caddy power is OFF, the Rheostat Speed Control is in OFF position and the remote control is stored securely!
  7. For X4R and X4 Pro insert anti-tip wheel into holding bar on motor housing and secure with pin.
  8. Attach optional accessories, such as Scorecard/Beverage/Umbrella holder, below the handle. Instructions provided separately.

X4R OnlyUnpack remote control and install batteries with plus and minus poles as indicated in the diagram in the battery compartment of the unit.

OPERATING INSTRUCTIONS

Manual Handle Control Functions

  1. Press and hold ON/OFF power button for about 2-5 seconds to turn caddy on or off (LED will light up)
  2. The rheostat speed dial on the right side of the handle lets you choose your preferred speed seamlessly. Dial forward to increase speed. Dial backwards to reduceSuggestion: When first starting out, set your normal walking speed. Mark that position on your rheostat with a marker as a reference point.
  3. To set the Digital Cruise Control: Select the ideal speed to match your pace with the rheostat speed dial. Then keep that speed by stopping the cart with a press of the power button. This will stop the cart, but keep the speed already set on the speed dial. Once you are ready to go press the power button again, and the caddy will automatically travel at the same speed it was last set. Once you are moving again you can adjust the speed with the Rheostat speed dial.
  4. The caddy is equipped with a “Soft start” ability which ensures smooth acceleration up to your selected speed.
  5. The caddy is equipped with a 10, 20, 30 M/Y Advance Distance Timer: From a stationary position Press the “Timer” button once, the caddy will advance 10 m/y and stop, press twice for 20 m/y and 3 times for 30 m/y. You can stop the caddy during your distance timer by pushing the stop button on either your handle or remote.
  6. The green and red LED battery indicator on the control shows the battery charge at any time. If green, the battery is measuring over 12V and is fine. When it turns red it is measuring under 12V and needs to be charged soon.

  1. The X4 Classic has a different face plate.
  2. Power button has single feature power up cart or shut it off.
  3. To set the Digital Cruise Control: Select the ideal speed to match your pace with the rheostat speed dial. Then keep that speed by stopping the cart with a press of the green button w/triangle. This will stop the cart, but keep the speed already set on the speed dial. Once you are ready to go press the power button again, and the caddy will automatically travel at the same speed it was last set. Once you are moving again you can adjust the speed with the Rheostat speed dial.
  4. With this model you set the speed by pressing the green arrow button just below the power button.

Remote Control Operation (X4R Only)

FUNCTIONS:

  1. STOP: The red button in the middle of the directional arrows should be used to stop the caddy abruptly or as emergency brake.
  2. TIMER: 10, 20, 30 yards/meters: press once -10 yds., twice -20 yds.; three times – 30 yds.
  3. BACKWARD ARROW: Pressing the back arrow will set the caddy in backward motion. Increase backward speed by pushing multiple times. Press also to decrease forward speed/slowing the caddy.
  4. FORWARD ARROW: Pushing the forward arrow will set the caddy in forward motion. Pushing multiple times will increase the speed. Push arrow to slow down. If you need to stop press the stop button.
  5. LEFT ARROW: Left turns. When the arrows are released the caddy stops turning and continues straight at the original speed prior to turning.
  6. RIGHT ARROW: Right turns. Same as left arrow function.
  7. ON/OFF Switch: Located on the right side of the device. Turns remote control on or off; recommended to prevent accidental engagement of caddy.
  8. ANTENNA: Internal
  9. LED: Lights up when a button is being v pushed indicating a signal is being sent
  10. BATTERIES: 2 x 1.5V AAA

Remote Control Resynchronization

Step 1 – Make sure power is totally off for at least five (5) seconds.Step 2 – Hole down the stop button on the remoteStep 3 – Power up cart. Continue to hold down the stop button on the remote.Step 4 – Continue to hold down the stop button until lights on the LED blink.Step 5 – Cart is now in “sync” test each function to assure all are functioning.You’re ready to go!

Additional Functions

Braking System: The caddy drive train is designed to keep the wheels engaged with the motor/gearbox, thus acting as a brake that will maintain the caddy’s speed while going downhill.

Tracking Adjustment: Tracking behavior of all electric caddies is strongly dependent on equal weight distribution on the caddy and slope/topography of the golf course. Testyour caddy’s tracking by operating it on a level surface without the bag. If changes are necessary, you can adjust the tracking of your caddy by loosening the front wheel axle and the Adjustment bar on the right side of the from wheel and shifting the axle accordingly. After such adjustment fasten screws in-reverse order but do not over tighten.

USB port is available for charging GPS and/or cell phones. It is located in the end cap of the upper frame above the handle control.

Electronic Systems
  • Remote Control Range: We recommend not to exceed 20-30 yards distance. The greater the distance between you and the caddy, the greater the chance of losing control of it.
  • Microcomputer: The remote caddy has 3 microcomputer controls. The primary microprocessor is in its own compartment underneath the battery tray. We call it the controller. The 2nd is in the remote control transmitter handset, and the third is in handle controls at the top of the handle (handle control board). The battery charge indicator lights will light up indicating the power is “ON”. Also, it will indicate the charge level of the battery, green ( OK to run) or red (near discharged, will fail shortly)
  • Safety Protection: When the temperature of the controller box reaches its upper limit, the overload circuit will automatically shut down the unit to cool it down. The remote control unit will NOT operate at this time, but you may continue to use your caddy with manual operation.
  • Microprocessor Controlled Electronics System: When you connect the battery, the electronics system will automatically run through a start-up routine; then once completed you can press the main OFF/ON switch on the handle. The battery charge indicator lights will show you the charge level of the battery from green (fully charged) to red (discharged).
  • Important: The electronics controller box contains no user serviceable parts. Therefore, it is sealed to reduce the risk of moisture entering and impacting the electronic system. Breaking this seal increases the risk of damaging the electronics and decreasing the reliability of your caddy. DO NOT attempt to open the controller case. DOING SO WILL VOID THE WARRANTY!
  • Battery Operation and Care: Follow battery charge and maintenance instructions. The battery comes with leads and a 3-prong connector.

Battery Maintenance and Additional Instructions

  • Battery Charging and Maintenance (see specific separate instructions for sealed lead acid (SLA) and lithium batteries)
  • PLEASE OBEY THESE PRECAUTIONS FOR BATTERY USE & CHARGING:
  • Please do not charge the battery in a sealed container or in upside down position. Charge the battery in a well-ventilated area.
  • Please do not charge the battery near a heat source, where heat accumulation may occur, or in direct sunlight.
  • In order to prolong the service life of the battery, avoid complete discharge and charge the battery after every use. Unplug the battery from the charger once the charge is complete. When the caddy is not in use for an extended period of time, it is recommended to charge the battery once every 6 weeks.
  • The red color on the battery pole stands for positive, and the black stands for negative. In case of battery replacement, please reconnect the poles of the battery correctly to avoid severe damage.
  • Please do not disassemble the battery or throw it into a fire. EXPLOSION HAZARD!
  • NEVER TOUCH THE ELECTRIC POLES OF THE BATTERY AT THE SAME TIME! THIS IS A SEVERE SAFETY HAZARD!

Recommendations

  • Fully charge the battery for approximately 5-9 hours before the first use.
  • Do not leave the battery on the charger. Remove it from the charger after charge is complete
  • The battery will take approximately 2-3 rounds and charging cycles before it reaches its full operating potential. During the first couple of rounds it might still be below its optimal power.
  • Never keep your battery connected to the grid during prolonged power outages. It might be irreversibly damaged. DO NOT fully discharge the battery by “overplaying” it. It is recommended to avoid complete discharge of the battery. Life of sealed lead acid and lithium batteries is dependent on a variety of factors, other than purely the number of charges, including but not limited to, frequency between charges, duration of charge, level of drainage, idle time, operating temperature, storage conditions and duration and overall shelf time. Bat-Caddy will cover our batteries according to our warranty policy and any potential additional coverage is at our discretion”.

Testing Your Caddy

EnvironmentFirst, make sure that you perform your first test of the caddy in a wide and safe area, free of obstructions or valuables, such as people, parked automobiles, flowing traffic, bodies of water (rivers, swimming pools, etc.), steep hills, cliffs or similar hazards.

Manual Control OperationTest the manual function first: Press the On/Off button for 2-5 seconds. The manual functions of the caddy are controlled through the speed control dial (rheostat) on the top of the handle. Turning the wheel clockwise will control the forward movement of the caddy. In order to slow down or stop the caddy, turn the wheel counterclockwise. Turn the dial SLOWLY in order to prevent the caddy from “jumping” away!

Remote Control Operation (X4R Only)

Make sure you are close to the caddy at all times while testing it and familiarizing yourself with the remote control! Turn on the main power switch and make sure that the speed dial control (rheostat) is in the OFF position. One press of the Forward/Backward arrows on the remote control starts the caddy in either direction. Further presses increase the speed. In order to stop the caddy, press the round red STOP button in the middle of the remote. To turn the caddy in either direction while moving, press the left or right arrows briefly. Once you release the button, the caddy will continue in the current direction at the same speed prior to the turning command. You will notice that the caddy reacts differently on different surfaces, and with different weight loads, so it will take some practice to get just the right touch for turning maneuvers. Always make sure you stay close enough to control the caddy manually in an emergency.

Testing Your CaddyThe remote is designed to have a maximum reach of 80-100 yards, but we strongly recommend to operate the caddy in closer ranges of 10-20 yards (not exceeding 30 yards) to be able to react quickly to any unforeseen events, such as other golfers crossing your path, or to avoid hidden obstructions such as creeks, bunkers, or uneven ground, etc. or an unexpected disconnection in remote operation. An additional safety feature of this caddy is that it will stop moving if it does not receive a signal from the remote control at least every 45 seconds. This way should you ever be distracted, your caddy does not completely get away. By pressing the lower Timer button on the remote, the caddy can be moved forward automatically by 10, 20, or 30 yards. STOP will make the caddy stop in case of overreach. Do not use this function close to water or other hazards. Never park your caddy facing water or roads!

Recommendations for Efficient and Safe Operation

  • Be alert and act responsibly at all times while operating your caddy, just as you would when operating a riding cart, motor vehicle, or any other type of machinery. We absolutely do not recommend the consumption of alcohol or any other impairing substances while operating our caddies.
  • DO NOT operate the caddy carelessly or in narrow or dangerous places. Avoid using your caddy in places where people may gather, such as parking lots, drop-off areas, or practice areas, to avoid damage to people or valuables. We recommend operating your caddy manually in crowded areas with or without power. Please make sure to always switch off the power and secure the caddy when you are through or when not in use.
  • The caddy (X4R) is equipped with an automatic runaway prevention feature. It will automatically stop if it does not receive a signal from the remote for about 45 seconds. A quick press of the forward button will put it in motion again.
  • With its optimized balance and straight front wheel, the caddy usually has responsive turning and maneuvering abilities. However, it sometimes tends to react to uneven weight distribution of its load or slope variations and will follow the weight and the slope of the course, which is normal for electric caddies. Please make sure that the weight in your bag is distributed evenly (move heavy balls and items to both sides equally and to the upper part of your bag, or shift the bag on the caddy). Also, when operating you caddy, anticipate the slope of the course in order to avoid frequent corrections in direction. When the need for complicated correction adjustment maneuvers, such as very uneven terrain, steep hills, narrow and/or sloped cart paths, muddy areas, gravel paths, close to bunkers and hazard, around bushes and trees it is strongly recommended to steer the caddy manually with the handle while adjusting the speed with the remote. When operating the caddy often in bumpy terrain we recommend to add an additional bungee strap to the lower and/ or upper bag support to give the golf bag additional hold and prevent it from shifting.
  • Please avoid or minimize operation on hard and rough surfaces, such as cart paths, asphalt roads, gravel roads, root etc., as this will cause unnecessary wear and tear on tires, wheels and other components. Guide the caddy manually when on cart paths with curbs. Bumping into hard objects might cause damage to wheels and other components! The caddy is best operated on soft and smooth surfaces such as fairways.

General Maintenance

All of these recommendations, along with common sense, will help keep your Bat-Caddy in top condition and ensure that it remains your reliable partner, both on and off the links.

  • The Bat-Caddy has been designed so that the user can concentrate on playing golf, while the caddy does the work of carrying your bag. In order to keep your Bat-Caddy looking its best, wipe any mud or grass from the frame, wheels and chassis after every round using a damp cloth or paper towel.
  • NEVER use water hoses or high-pressure jet washers to clean your caddy to prevent moisture from entering the electronic systems, motors, or gear boxes.
  • Remove the rear wheels every few weeks and clean out any debris that may cause the wheels to drag. You may apply some lubricant, such as WD-40, to keep moving parts smooth and corrosion-free.
  • A 4 to 5 hour round of golf played once a week for 12 months is equivalent to approximately four years’ use of a lawn mower. Thoroughly inspect your cart at least once a year, and if you notice any symptoms of wear, contact your Bat-Caddy Service Center. Alternatively, you can have your caddy inspected and tuned at our Service Centers, so it’s always in great shape for the new season.
  • Always disconnect the battery when you store your caddy, and always reassemble your caddy before reconnecting the battery. If you are not planning to play for at least a month, store the battery in a cool dry place (not on a concrete floor) and DO NOT LEAVE IT ON THE CHARGER.

TROUBLESHOOTING GUIDE

Caddy does not have power •     Make sure battery is plugged correctly into caddy and battery lead plug is damage free.

•     Make sure battery is sufficiently charged

•     Depress and hold power button for at least 5 seconds

•     Make sure battery leads are connected to proper poles (red on red & black on black)

•     Make sure power button is engaging circuit board (you should hear a click)
Motor is running but wheels don’t turn •         Check if wheels are attached correctly. Wheels must be locked in.

•         Wheels must be on the correct side (X4 Classic, X4 Sport)

•         Check wheel axle pins.
Caddy pulls to left or right •     Check if wheels are firmly latched to axle

•     Check if both motors running

•     Check tracking on level ground without bag

•     Check weight distribution in golf bag

•     If necessary adjust tracking on front wheel
Problems attaching wheels •     Adjust quick release catch

TECHNICAL SPECIFICATIONS

Model Name X4 Classic / X4 Sport
Model Type X4C & X4S: Non-Remote/Single Motor
Standard Battery 35/36Ah SLA

Dimensions SLA: 8 x 5 x 6 in (20 x 13 x 15 cm)

Weight: 25 lbs Average charge time: 4-8 hours
Lithium Battery 12V 25 Ah Lithium Dimensions: 7x5x4in, Weight: 5 lbs,

14V 20 Ah Lithium Dimensions: 7x4x3 in, Weight 7 lbs.

Average Charge time 4-6 hours
Folded Dimensions (w/o wheels) Length: 32” (81.3 cm)

Width: 22” (60 cm)

Height: 9” (22.9 cm)
Unfolded Dimensions Length: 42-50 in” (107-127 cm)

Width: 23” (58.4 cm)

Height: 35-45” (89-114cm))
Weight Caddy 21 Lbs (9.5 kg)
Total Weight (standard battery, SLA) X4C, X4S: 42 lbs. (19 kg)
Speed 5.4 mph (8.6 km/h)
Control Functions X4C & X4S: Manual Seamless Rheostat Cruise Control

Battery Charge Indicator, Power On/Off

X4S: Timed Distance Advance function (10,20,30 yards) USB Port
Distance/Range 13 mi (20 km)/27+ holes, 36+ holes w/LI
Climbing Ability 30 degrees
Maximum Load 77 lbs (35 kg)
Charger Input: 110-240V AC

Output: 12V/3A-4A DC Trickle Charger
Motor Power: 1 x 200 Watt (200 Watt) – 12V DC Electric
Front Wheels Airless, Rubberized tread, Tracking adjustment
Rear Wheels Airless, Rubberized Tread, Quick-release mechanism
Drive Train Rear Wheel Drive, Gear ratio (17:1)
Handle Height Adjustment P
Materials Aluminum/SS and ABS
Available Colors X4C: Oxidized Silver (only) X4S: Silver, Black, White
Available Accessories Scorecard Holder, Cup Holder, Umbrella Holder
Optional Accessories Rain Cover / GPS/Cell Phone Holder / Sand & Seed Dispenser / Remote Clip Hanger / Carry Bag / Waiting Seat

See “Special Offers” for seasonal promotions
Warranty 1 Year on Parts and Labor

1 Year on SLA Battery/2 Years on LI Battery (pro-rated)
Packaging Type: Cardboard Box, Styrofoam or Cardboard Cushioning Dimensions: 33” x 24” x 12” (84 x 61 x 30 cm)

Gross Weight: 29 Lbs (13 kg)
Model Name X4 Pro / X4R
Model Type X4 Pro: Non-Remote/Dual Motor X4R: Remote/Dual Motor
Standard Battery 35/36Ah SLA

Dimensions SLA: 8 x 5 x 6 in (20 x 13 x 15 cm)

Weight: 25 lbs Average charge time: 4-8 hours
Lithium Battery 12V 25 Ah Lithium Dimensions: 7x5x4in, Weight: 5 lbs,

14V 20 Ah Lithium Dimensions: 7x4x3 in, Weight 7 lbs.

Average Charge time 4-6 hours
Folded Dimensions (w/o wheels) Length: 32” (81.3 cm)

Width: 22” (60 cm)

Height: 9” (22.9 cm)
Unfolded Dimensions Length: 42-50 in” (107-127 cm)

Width: 23” (58.4 cm)

Height: 35-45” (89-114cm))
Weight Caddy 21 Lbs (9.5 kg)
Total Weight (standard battery) X4P, X4R: 28 lbs. (13 kg)
Speed 5.4 mph (8.6 km/h)
Control Functions Manual Seamless Rheostat Remote Control (range up to 100 yards)

Functions: Forward, Reverse, Left, Right, Stop Timed advance function (10, 20, 30 m/y)

Cruise Control, Battery Charge Indicator, USB Port, Power On/Off
Distance/Range 10-12 mi (20 km)/27-36+ holes
Climbing Ability 30 degrees
Maximum Load 77 lbs (35 kg)
Charger Input: 110-240V AC

Output: 12V/3A-4A DC Trickle Charger
Motor Power: 2 x 200 Watt (400 Watt) – 12V DC Electric
Front Wheels Airless, Rubberized tread, Tracking adjustment
Rear Wheels 11 1/8” Diameter (11 1/2” w/ Tread) Airless, rubberized tread Quick-release mechanism

Standard Anti-Tip Single Wheel
Drive Train Rear Wheel Drive, Gear ratio (17:1)
Handle Height Adjustment P
Materials Aluminum/SS and ABS
Available Colors Oxidized Silver, Matte Black, Glossy White
Available Accessories Scorecard Holder, Cup Holder, Umbrella Holder
Optional Accessories Rain Cover / GPS/Cell Phone Holder / Sand & Seed Dispenser / Remote Clip Hanger / Carry Bag / Waiting Seat

See “Special Offers” for seasonal promotions
Warranty 1 Year on Parts and Labor

1 Year on SLA Battery/2 Years on LI Battery (pro-rated)
Packaging Type: Cardboard Box, Styrofoam or Cardboard Cushioning Dimensions: 33” x 24” x 12” (84 x 61 x 30 cm)

Gross Weight: 33 Lbs (15 kg)

FREQUENTLY ASKED QUESTIONS (FAQs)Please check our website at https://batcaddy.com/pages/FAQs.html for FAQs

For Technical Support please contact one of our Service Centers or visit https://batcaddy.com/pages/TechTips.html

report this ad

Contact info athttps://batcaddy.com/pages/Contact-Us.htmlCheck our website www.batcaddy.com

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , , , , ,