Installation GuideModel: AMAB-0621-SGas Spring Monitor Bracketwith USB ports
Hey!Let’s get your new monitor bracket ready to use, fast!
Have you got everything?
You will also need a Phillips-head screwdriver to secure your monitors to the bracket
Unpack the box (be gentle) and make sure all of these items are there:
| A. Gas Spring MonitorBracket with USB portsB. Bracket ClampC. M4 x 8mm Screws (4) | D. M4 x 12mm Screws (4)E. Screw Spacers (4)F. 4mm Hex KeyG. 5mm Hex Key | H. Cap Screws (3)I. Bracket Clamp CoverJ. Bracket CoverK. Cable Cover | L. Warranty CertificateM. General Safety WarningsN. Installation Guide |
Attach to your desk (Mounting to the edge of the desk)
Attach the bracket clamp to the base with the 3 cap screws. Use the 4mm hex key to tighten.
Adhere the bracket cover and the bracket clamp cover to the support block of the bracket clamp.
Tighten the securing bracket by turning the adjuster clockwise and make sure it’s tight. If your desk is too thick, adjust the clampdown a notch and re-tighten.
Attach to your desk (mounting to desk cable opening)
Loosen the two screws that connect the two parts of the clamp.
Put the arm through the hole in your table.
Nearly done! Just a bit more on the other side of this page…Install the lower part of the clamp with the two screws. Tighten the clamp until it is securely fastened to the desk.
Mount your monitors
Install the upper two screws but don’t screw them completely just yet. Hang the monitor on the mounting plate.
Install the lower two screws. Now you can fasten the upper two screws all the way.
If your monitor is a 75 x 75mm mounting pattern, use the inner 4 holes on the monitor mounts.We have included two sizes of screws and spacers to suit most monitors. Select the appropriate screw length to best suit your installation. If you need to use the spacers, place them between your monitor and the mounting plate.
Adjust to your space
It’s important to make your workspace as ergonomic as possible.
This bracket allows you to adjust the height, tilt, and swivel of your monitor’s position so that it’s truly fitted to your space and sitting.
2. To lock in your adjusted position, you will need to tighten the bolt on the mounting plate using the supplied 5mm hex key.3. Use the 5mm hex key to adjust the height tension of the gas spring arm. This keeps monitors stable at any position. The heavier the monitor, the further you’ll need to turn to the + symbol.
Hide those cables
You can tuck away those unsightly cables into the bracket arm itself.Tuck the cables into the underside of the lower bracket arm.Run the cables along the arm until they reach the compartment on the upper part of the arm.Secure the cables by locking the compartment cover onto the arm.
Give us a call
What? Do you mean this Installation Guide didn’t have ALL the answers? Speak to us! We’d love to help you get up and running as quickly as possible. Call ours After Sales Support on 1300 886 649.Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Your new Monitor Bracket is ready to enjoy!
Well done, you made it.Now sit back and relax… your new monitor bracket is automatically covered by a 1-year warranty. How nice!
[xyz-ips snippet=”download-snippet”]