beco 24″ Front-Load Heat Pump Ventless Dryer HPD24412W User Guide

Operating Clothes Dryer

  1. Place the laundry inside the clothes dryer.
  2.  Close the door.
  3. Press the On/Off button.
  4.  Select the appropriate program using the program selector knob.Use the program selection table for an appropriate program.The selected program duration shall write on the screen.
  5. Press -StarVPause- button to start the program.
  6. / Anti Wrinkle’ led lights up when the drying operation is completed.Press the ‘Buzzer Cancer button for audible warning at the end of the program.
  7. You may open the door and take the laundry out. You can take your laundry when ‘Final / Anti Wrinkle’ led lights up. AIn case of not taking the laundry out, the anti-creasing program that prevents creasing of the laundry by rotating it at certain intervals shall be activated.
  8. Clean the fitter. (see. Section 21)always clean the lint filter after each use.
  9. Press the On/ON button to turn off the clothes dryer.

Cleaning the Lint Filter

  1. Remove the filter.The filter symbol lights turn on after each use clean the filter.
  2. open the filter and clean the lint inside the fitter. You can clean the in by hand or by using a piece of cloth. the layer can build up on the fitter pores that can cause clogging of the filter after using Ayour the clothes dryer for a while. Wash the filter with warm water to remove the layer that builds upon the filter surface. Dry the filter completely before using it.
  3.  Close the lint litter and place it back into its housing.Do not operate your A clothes dryer without installing the filter in its place after cleaning it.

Cleaning the Filter Drawer

  1. Push the kick p ate button to open the kick plate.
  2. Remove the filter drawer cover by turning it in the direction of the arrow and pull out the filer drawer.
  3. Open the fifer drawer by pressing the red button and take out the sponge. 
  4. Clean the lint. fire and cotton raveling on the flier cloth by hand or clean with a soft piece of the Cloth.

    The player can build up on the filter pores that can cause clogging of the filter after using your clothes dryer for a while. Wash the filter with warm water to remove the layer that builds upon the filter surface. Dry the filter completely before using it.

  5. Wash the filter drawer sponge and squeeze it by hand n order to reframe the excessive water.

  6. Place the sponge back into its place.

  7. ADo not use your dryer without a fitter drawer sponge. Such use Increases the energy consumption of your appliance and extends drying period for each program.

  8. Close the liter drawer to lock the red button.
  9. Place the liter drawer back into its place, turn the filter drawer cover clockwise making sure that it is closed securely.

Draining the Clothes Dryer

  1. Connect the pipe to the pump cutlet.
  2. Connect the pipe to the drain.Make sure that you have tightly inserted the pipe into the pump outlet.

Child-proof lock

To activate the child lock. press the ‘Buzzer Cancel’ and ‘End Time Swung buttons simultaneously for 3 seconds. When the child lock is activated. the led with the lock symbol lights iv on the screen. Press the same buttons for 3 seconds to deactivate the chid lock.Child lock we are deactivated when you turn your the clothes dryer oft and on by the ‘On/Off Button’.

Canceling the Program

Press the ‘On/Off button if you want to cancel the program and stop the drying after the clothes dryer starts running.When the clothes dryer is taken to the standby mode by pressing the ‘Start / Pause button while the program is running, turning the program selector knob to any direction wig cancel the program.Rev:7.220276/ 2905530455-EN

[xyz-ips snippet=”download-snippet”]