behringer B215D EUROLIVE 2-Way PA Speaker System User Guide

Quick Start GuideEUROLIVEB215D/B215D-WH/B212D/B212D-WH/B210D/B210D-WH/ B208D/B208D-WHActive 550/200-Watt 2-Way PA Speaker Systemwith 15″, 12″, 10″ and 8″ Woofer and 1.35″ Compression Driver

 

 

Important Safety Instructions

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modifications should be performed only by qualified personnel.This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

CautionTo reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.CautionTo reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.CautionThese service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1.  Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
18. Do not install in a confined space, such as a bookcase or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point. 21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

EUROLIVE B215D/B215D-WH/B212D/B212D-WH/B210D/B210D-WH/B208D/B208D-WH Hook-up

Step 1: Hook-UpConnecting a microphoneLinking several speakers

Connecting a stereo signal source

EUROLIVE B215D/B215D-WH/B212D/B212D-WH/B210D/B210D-WH/B208D/B208D-WH Controls

Step 2: Controls

1. POWER SWITCH Turns the speaker on and off.
2. FUSE Replace a blown fuse here.
3. POWER SOURCE Plug the included IEC power cable into this jack.
4. ¼” TRS Input Connect a mixer output or other line-level signal using a cable with a ¼” plug.
5. CLIP LED Lights when the input signal begins to overload.
6. LEVEL KNOB Adjusts the input sensitivity (gain) for the ¼” and XLR inputs reduce the input level if the CLIP LED lights.
7. XLR INPUT Connect a microphone, balanced mixer output, or the LINK OUTPUT from another speaker using a balanced cable with a female XLR plug.WARNING: Never use the ¼” and XLR inputs at the same time.
8. HIGH EQUALIZER Cut or boost treble frequencies by ±15 dB.
9. LOW EQUALIZER Cut or boost bass frequencies by ±15 dB.
10. LINK OUTPUT Sends a copy of the source signal to another speaker using an XLR cable.
11. POWER LED Lights when the speaker is turned on.

EUROLIVE B215D/B215D-WH/B212D/B212D-WH/B210D/B210D-WH/B208D/B208D-WH Getting startedStep 3: Getting started

1. Place the speaker(s) in desired locations, either on stands or as wedge monitors on the floor.
2. Make all necessary connections.DO NOT turn on the power yet.
3. Turn on your audio source (mixer, microphone).
4. Turn on your speaker(s) by pressing the POWER SWITCH. The POWER LED will light up.
5. Play your audio source or speak into your microphone at a normal to loud level.
6. Adjust the LEVEL knob to the desired volume level. If the CLIP LED flashes, turn the LEVEL knob back down. If using multiple speakers, the LEVEL knob must be adjusted on each speaker.
7. If necessary, adjust the HIGH and LOW EQUALIZER knobs on each speaker to boost or cut treble and bass frequencies

Specifications

B215D	B212D	B210D	B208D
Amplifier Power Output
Low-Frequency Range
RMS Power	280 W @ 8 Ω	280 W @ 8 Ω	135 W @ 8 Ω	135 W @ 8 Ω
Peak Power	450 W @ 8 Ω	450 W @ 8 Ω	160 W @ 8 Ω	160 W @ 8 Ω
High-Frequency Range
RMS Power	65 W @ 8 Ω	65 W @ 8 Ω	38 W @ 8 Ω	38 W @ 8 Ω
Peak Power	100 W @ 8 Ω	100 W @ 8 Ω	42 W @ 8 Ω	42 W @ 8 Ω
Speaker Size
Size	15″	12″	10″ / 25 cm	8″ / 20 cm
Audio Inputs
XLR (Servo-Balanced)
Sensitivity	-40 dBu to +4 dBu
Input impedanceImpédance d’entrée	20 kΩ
¼” TRS Jack (Servo-Balanced)
Sensitivity	-40 dBu to +4 dBu
Input impedance	20 kΩ
Level Control
Input Trim	-∞ to + 30 dB
Max. input level	+22 dBu
Max. input le
Link	XLR connector
Loudspeaker System Data
Frequency Response	65 Hz to 20 kHz
Crossover frequency	1.9 kHz	2.4 kHz	24 kHz	24 kHz
Sound pressure level	max. 126 dB SPL @ 1 m	max. 125 dB SPL @ 1 m	max. 113 dB SPL @ 1 m	max. 113 dB SPL @ 1 m
Limiter	Optical
Dynamic Equalizer	Processor-controlled
Equalizer
HIGH	12 kHz / ±15 dB
LOW	80 Hz / ±15 dB

Power Supply
Voltage (Fuses)
USA/Canada	120 V, 60 Hz (T  6.3 A H 250 V)	120 V, 60 Hz (T  6.3 A H 250 V)	120 V, 60 Hz (T  4.0 A H 250 V)	120 V, 60 Hz (T  4.0 A H 250 V)
UK/Australia	240 V~, 50 Hz (T  3.15 A H 250 V)	240 V~, 50 Hz (T  3.15 A H 250 V)	240 V~, 50 Hz (T  2.0 A H 250 V)	240 V~, 50 Hz (T  2.0 A H 250 V)
Europe	230 V~, 50 Hz (T  3.15 A H 250 V)	230 V~, 50 Hz (T  3.15 A H 250 V)	230 V~, 50 Hz (T  2.0 A H 250 V)	230 V~, 50 Hz (T  2.0 A H 250 V)
Japan	100 V~, 50-60 Hz (T  6.3 A H 250 V)	100 V~, 50-60 Hz (T  6.3 A H 250 V)	100 V~, 50-60 Hz (T  4.0 A H 250 V)	100 V~, 50-60 Hz (T  4.0 A H 250 V)
Power consumption	max. 600 Watts	max. 600 Watts	max. 300 Watts	max. 300 Watts
Mains connection	Standard IEC receptacle
Dimensions & Weight
Dimensions (H x W x D)	approx. 27.2 x 17.3 x 13.2″ approx. 690 x 440 x 335 mm	approx. 21.7 x 13.6 x 10.6″ approx. 550 x 345 x 270 mm	approx. 18.34 x 11.50 x 9.61″approx. 466 x 292 x 244 mm	approx. 14.72 x 9.8 x 8.1″approx. 374 x 249 x 205 mm
Weight	45.2 lbs / 20.54 kg	31.9 lbs / 14.5 kg	19.18 lbs / 8.7 kg	15 lbs / 6.8 kg

Other important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATIONBehriinger

EUROLIVE B215D/B215D-WH/B212D/B212D-WH/B210D/B210D-WH/B208D/B208D-WH

Responsible Party Name: Music Tribe Commercial NV Inc.Address:5270 Procyon Street,Las Vegas NV 89118, United StatesPhone Number:+1 702 800 8290

EUROLIVE B215D/B215D-WH/B212D/B212D-WH/B210D/B210D-WH/B208D/B208D-WHThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Important information:Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU, and Amendment2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHCand Directive 1907/2006/EC.Full text of EU DoC is available at https://community.musictribe.com/EU Representative: Music Tribe Brands DK A/SAddress: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, DenmarkWe Hear You