Quick Start GuideSHARK FBQ100
Automatic Feedback Destroyer with Integrated Microphone Preamp, Delay Line, Noise Gate, and CompressorSHARK FBQ100
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modifications should be performed only by qualified personnel.This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.CautionTo reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.CautionTo reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.CautionThese service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
- Do not install in a confined space, such as a bookcase or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
- Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
- This apparatus may be used in tropical and moderate climates up to 45°C.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, Aston Microphones, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.LIMITED WARRANTYFor the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Step 1: Hook-upFeedback protection for one microphone
Feedback protection for an acoustic guitar (only possible if the guitar has a preamp included)
FBQ100 in the insert path
Step 1: Hook-up
Using the FBQ100 for time compensation
Step 2: Controls
Step 3: Getting started
- Make all appropriate audio and power connections to the FBQ100. Leave the power for all devices off!
- Select the proper levels with the INPUT and OUTPUT buttons to suit your application.
- Turn the power on for all devices.
- Begin playing audio from your mixer or another source.
- If using a line-level source, adjust the CLIP LEVEL knob to optimize the FBQ100’s internal operating level. Do not let the CLIP LED light.
- If a microphone is plugged directly into the XLR INPUT, set the CLIP LEVEL knob to the center (12:00) position. While speaking into the microphone, adjust the MIC GAIN knob to set the input sensitivity. Do not let the CLIP LED light.
- Hold the ACTIVE button for 3 seconds to reset all feedback filters.
- If the ACTIVE button LED is not illuminated, press the ACTIVE button to activate the feedback filters.
- Log on to behringer.com to download the full manual for more details on the FBQ100’s functionality.
Specifications
| Audio Inputs | |
| Connectors | XLR and ¼” TRS jack |
| Impedance | 6 kΩ balanced, 3 kΩ unbalanced |
| Nominal operating level | Microphone or line-level source (switchable) |
| Max. input level | +19 dBu at microphone level and line level |
| Audio Outputs | |
| Connectors | XLR and ¼” jack |
| Impedance | 60 Ω balanced, 30 Ω unbalanced |
| Nominal operating level | Microphone level source or +4 dBu (switchable) |
| Max. output level | +20 dBu at +4 dBu nominal level, -12 dBu at microphone level |
| System Specifications | |
| Frequency response | 10 Hz to 21 kHz |
| Noise | > 92 dB at line level, unweighted, 22 Hz to 22 kHz
> 89 dB at microphone level, unweighted, 22 Hz to 22 kHz |
| THD | 0.007% typ. @ +4 dBu, 1 kHz, gain 1 |
| Digital Processing | |
| Converters | 24-bit Sigma-Delta, 64/128-times oversampling |
| Display | |
| Type | 4-digit numeric LED display |
| Power Supply | |
| Mains Voltages/Power Consumption | |
| USA/Canada | 120 V~ 60 Hz 19 W |
| U.K./Australia | 240 V~ 50 Hz 20.5 W |
| Europe | 230 V~ 50 Hz 20 W |
| Korea | 220 V~ 50 Hz 20 W |
| China | 220 V~ 50 Hz 20 W |
| Japan | 100 V~ 50/60 Hz 18 W |
| Physical | |
| Dimensions (H x W x D) | approx. 2.2 x 3.5 x 5.2″ / 56 x 88 x 132 mm |
| Net Weight | approx. 0.84 lbs / 0.38 kg |
Other important information
Important information
- Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple onlineform helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
- Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATIONBehringerSHARK FBQ100
| Responsible Party Name: | Music Tribe Commercial NV Inc. |
| Address: | 5270 Procyon Street, Las Vegas NV 89118, United States |
| Phone Number: | +1 702 800 8290 |
SHARK FBQ100This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
report this adImportant information:Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU andAmendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.Full text of EU DoC is available at https://community.musictribe.com/EU Representative: Music Tribe Brands DK A/SAddress: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, DenmarkWe Hear You
References
[xyz-ips snippet=”download-snippet”]