Behringer PB1000 Pedal Board User Guide
Thank you for showing your confidence in us by purchasing the Behringer PEDAL BOARD PB1000/PB600. This high-quality lightweight pedal board is able to transport up to 12 (PB1000) or up to 6 (PB600) pedals. The onboard 1.7 A power supply includes all necessary cabling for powering your collection of stompboxes
Connections
- Use this 1/4″ TS INPUT connector to plug in the instrument cable.Please use only a high-quality instrument cable here.
- The 1/4″ TS TO EFFECTS connector sends the signal to your effects pedals.
- Use these 1/4″ TS FROM EFFECTS connectors to plug in the stereo effects signal from your effects pedals.
- These 1/4″ TS OUTPUT TO AMP connectors send the signal to your amp(s).
- Use the 9 V connection to plug in the included 9 V power supply.
- Use the DC OUT connector to plug in the included daisy chain cable and connect it to all effects pedals.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorizedattachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
Warranty
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Specifications
PB1000
Power Supply
| Connectors | ¼” TS, unbalanced |
| Power supply | 9 V, 1.7 A switching adaptor (included) |
| USA/Canada 120 V~, 60 Hz | GPE182-090170-1 (HSB-UL) |
| Europe/Australia 230 V~, 50 Hz | GPE182-090170-2 (HSB-EU) |
| U.K | GPE182-090170-3 (HSB-UK) |
| Korea 220 V~, 60 Hz | GPE182-090170-4 (HSB-SAA) |
| China 220 V~, 50 Hz | GPE182-090170-5 (HSB-CCC) |
| Japan 100 V~, 50/60 Hz | GPE182-090170-6 (HSB-JP) |
| Power connector | 2 mm DC jack, center negative (with daisy-chain cable included) |
| Power consumption | 2 mA |
Dimensions/Weight
- Dimensions (H x W x D): 19.8 x 26.1 x 4.5″ (504 x 663 x 115 mm)
- Weight: approx. 12.3 lbs / 5.6 kg including PSU & daisy chain
PB600
Power Supply
| Connectors | ¼” TS, unbalanced |
| Power supply | 9 V, 1.7 A switching adaptor (included) |
| USA/Canada 120 V~, 60 Hz | GPE182-090170-1 (HSB-UL) |
| Europe/Australia 230 V~, 50 Hz | GPE182-090170-2 (HSB-EU) |
| U.K | GPE182-090170-3 (HSB-UK) |
| Korea 220 V~, 60 Hz | GPE182-090170-4 (HSB-SAA) |
| China 220 V~, 50 Hz | GPE182-090170-5 (HSB-CCC) |
| Japan 100 V~, 50/60 Hz | GPE182-090170-6 (HSB-JP) |
| Power connector | 2 mm DC jack, center negative (with daisy-chain cable included) |
| Power consumption | 2 mA |
Dimensions/Weight
- Dimensions (H x W x D): 13 x 26.1 x 4.4″ (329 x 663 x 113 mm)
- Weight: approx. 8.4 lbs / 3.8 kg including PSU & daisy chain
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.Specifications and appearance may therefore differ from those listed or shown.
Application Example
(Products shown not included except PB1000/PB600)
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
BehringerPEDAL BOARD PB1000/PB6000
Responsible Party Name: Music Tribe Commercial NV Inc
Address: 5270 Procyon Street, Las Vegas NV 89118,United States
Phone Number: +1 702 800 8290
PEDAL BOARD PB1000/PB600
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Operation Ambient Temperature up to 45°.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/ EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/ EU Representative: Music Tribe Brands DK A/S Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
[xyz-ips snippet=”download-snippet”]