behringer Personal In-Ear Monitor Amplifier User Guide

behringer Personal In-Ear Monitor Amplifier User Guide

2. POWERPLAY P1

P1Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual

Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

CautionTo reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CautionThese service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  11. Use only attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  13. Unplug this apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
  16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
  18. Do not install in a confined space, such as a book case or similar unit.
  19. Do not place naked flame sources, such as lighted candles, on the apparatus.
  20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
  21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.Technical specifications, appearances and other information are subject to change without notice.All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.© Music Tribe Global Brands Ltd. 2021 All rights reserved

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty

POWERPLAY P1 Controls

Controls

  1. PHONES output accepts an 1/8″ (3.5 mm) TRS headphone plug.
  2. BATTERY STATUS LEDs display the current battery life. When a new battery is installed, and the power is turned on, the green LED will light. As battery life decreases, both LEDs will light, indicating that the voltage is between 6.8 and 7.3 V.When only the red LED is lit, the battery should be replaced.
  3. VOLUME knob adjusts the overall output to the headphones.
  4. BALANCE knob adjusts either the panning of a stereo source connected to both inputs, or the balance between mono sources connected to inputs L/1 and R/2.
  5. MODE button determines if the audio connected to inputs 1 and 2 are mixed in stereo or dual mono. In STEREO mode, the audio connected to INPUT (L) is routed to the left side of the headphones and the audio connected to INPUT (R) is routed to the right side of the headphones. In MONO mode, the audio connected to INPUTS(L) and (R) are routed to both sides of the headphones, and the volume level between the two sources is adjusted with the BALANCE knob.
  6. ON/OFF button turns the power on and off.
  7. DC IN accepts a 9 V power adapter.
  8. INPUT (L) accepts signals via XLR cables, which are either routed to the left channel in stereo mode, or to channel 1 in mono mode.
  9. INPUT (R) accepts signals via XLR cables, which are either routed to the right channel in stereo mode, or to channel 2 in mono mode.

Specifications

Connectors
Input 2 x XLR connector, balanced
Output 3.5 mm TRS connector
Input impedance 20 kΩ
Output impedance 10 Ω per channel
Frequency response 20 Hz – 80 kHz (+/-0.5 dB)
THD + N 0.01%
Signal-to-noise ratio >90 dB (A-weighted)
CMRR >50 dB
Crosstalk >40 dB
System Data
Normal input level 2 dBu
Max input level 6 dBu
Limit input level 7 dBu
Max output level 9.5 dBu
Indicators  
LEDs Power indicator (green), battery control indicator (red)
 

Voltage

Green LED lit: voltage > 7.3 V

Both green and red LED lit: voltage = 6.8 – 7.3 V Red LED lit: voltage < 6.8 V

Power Supply
Battery 9 V block alkaline or 8.4 V NIMH rechargeable battery
Power adapter Ext. input power DC 9 V (pin = neg., ring = pos.)
Europe PSU-SB-EU (G81-00000-37236)
USA/Canada PSU-SB-UL (G81-89832-03136)
Japan PSU-SB-JP (G81-89833-54837)
UK PSU-SB-UK (G81-00000-37237)
Australia PSU-SB-SAA (G81-32735-05565)
China PSU-SB-CCC (G81-89836-54835)
Standby power consumption 300 mW
Max operation current 90 mA
Max output power into 20 Ω 40 mW per channel
Physical  
Dimensions (H x W x D) 45 x 125 x 85 mm (1.8 x 4.9 x 3.3″)
Weight 0.27 kg (0.6 lbs)

Other important information

  1. Register Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com.Registering your purchase using our simple online form helps us to process your repair claims morequickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
  1. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe. com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.Address: 5270 Procyon Street,Las Vegas NV 89118,United StatesPhone Number: +1 702 800 8290

POWERPLAY P1

This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving
  • Increase the separation between the equipment and
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician forThis equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  • This device may not cause harmful interference, and
  • This device must accept any interference received, including interference that may cause undesired

Important information:

Changes or modifications to the equipment not expressly approved by MUSIC Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/ EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC. Full text of EU DoC is available at https://community.musictribe.com/ EU Representative: Music Tribe Brands DK A/SAddress: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

 

Read More About This Manual & Download PDF:

[xyz-ips snippet=”download-snippet”]


Posted

in

by