USER MANUAL
Thank you for choosing Better Bathrooms.Please read this manual before installing your product and keep it for future reference.Non-Illuminated MirrorsBeBa_24913, BeBa_24914, BeBa_24915BeBa_25541, BeBa_25542, BeBa_25543,BeBa_25544
- Single-person assembly
- We always recommend using professional tradespeople to install your productV1_30.10.2020
Congratulations on your purchase
And welcome to our growing gang of savvy shoppersWe’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.We hope your new product exceeds your highest expectations. However, if you experience any problems, please:
- call our friendly UK call center on 03303903062 (9 am-7 pm Monday to Friday, or 10 am-4 pm Saturday and Sunday), or
- send us a message via [email protected]
Important information
- Please read these instructions thoroughly and retain them for future reference
- Always check for pipes and wires before drilling the wall
Parts
Mirror x 1Wall Screws x 3Wall Plugs x 3Only two screws and plugs are required for the installation
Tools required
Installation
– Check the product for damage prior to installationBefore any drilling is carried out, please check for pipes and wires within the wall which could be damaged.Decide upon the hanging orientation of the mirror and measure between the fixing points on the back of the mirror.
Mark this dimension on the wall, ensuring the holes are level, using a spirit level.Drill the wall at the marked points on the wall for your required orientation and insert the wall plugs and tap until flush with the finished wall surface.
After fitting the wall plugs, insert the screw and tighten, DO NOT tighten the screw fully to the wall surface.Tighten the screw until it is between 2 -4 mm from the wall surface, as shown below.
When the screw is correctly located, offer the rear of the mirror to the wall to engage the bracket onto the screws.When the bracket is hooked onto the screw gently push down on the mirror to secure the mirror bracket fully onto the screw, as shown below.
Cleaning
Wipe the mirror clean and dry regularly, especially when the mirror is subject to steam or splashes.Do not use harsh chemicals or materials on the product, as this will damage the product and invalidate your guarantee.To clean and maintain the product, wipe using a clean damp cloth and wipe dry with a soft cloth.
For more information
- visit betterbathrooms.com
- email [email protected]
- call 03303903062
- write to Trident Business Park, Neptune Way, Huddersfield, HD21UA
Part of the BuyltDirect Group
[xyz-ips snippet=”download-snippet”]