Bissell 2529 Jetscrub Pet User Manual

Bissell 2529 Jetscrub Pet User Manual

Go online for a comprehensive walkthrough of your new purchase!This guide features everything you need to get ready for first use, including setting up, using and maintaining your machine, but join us online for a comprehensive walkthrough. Our online support includes tips and troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.com.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.When using an electrical appliance, basic precautions should be observed, including the following:

WARNINGTO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

  • Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug.
  • Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
  • Use indoors only.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
  • Do not use for any purpose other than described in this user guide. Use only manufacturer’s recommended attachments.
  • Do not use with damaged cord or plug. If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
  • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
  • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
  • Do not handle plug or appliance with wet hands.
  • Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  • Turn OFF all controls before plugging or unplugging appliance.
  • Use extra care when cleaning on stairs.
  • Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
  • Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
  • Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Use only BISSELL® cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formula section of this guide.
  • Do not immerse. Use only on surfaces moistened by the cleaning process.
  • Keep appliance on a level surface.
  • Do not carry the appliance while in use.
  • Always install float before any wet pick-up operation.

SAVE THESE INSTRUCTIONSTHIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER’S WARRANTY.

WARNINGImproper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONSThis appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Troubleshooting

For a comprehensive walkthrough of your product and support tips visit support.BISSELL.com.

Other maintenance or service not included in the manual should be performed by an authorized service representative.

We’re so happy you chose the JetScrub™ Pet. We put this guide together to help you set up, use and maintain your JetScrub Pet. We’ve also included some tips we think will come in handy when you first start using your JetScrub Pet, so let’s get started! For a comprehensive walkthrough of your product go to support.BISSELL.com.

What’s in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap. Additional accessories may be purchased at BISSELL.com.

Product View

For additional support videos and information about your product, visit support.BISSELL.com.

  1. Upper Handle
  2. SmartClean® Fingertip Controls
  3. Solution Spray Trigger
  4. Quick Release™ Cord Wrap
  5. Clean Water Tank
  6. Dirty Water Tank
  7. Float Stack
  8. Lower Cord Wrap
  9. Removable Brush Roll & Nozzle
  10. Cleanshot®
  11. Foot

Assembly

Go to support.BISSELL.com for additional how-to videos.

Cleaning Formulas

View our family of carpet cleaning formulas for your family of mess-makers at BISSELL.com.

Keep plenty of BISSELL formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the warranty. Do not use Hard Floor Formula on area rugs or carpet.

Certain trademarks used under license from The Procter & Gamble Company or its affiliates.

PretreatPretreat spots and stains to improve carpet cleaning performance.

BoostAdd Boost carpet cleaning formula enhancers to any formula to increase its effectiveness.

WARNINGTo reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL® cleaning formulas intended for use with the carpet cleaning device.

Filling the Clean Water Tank

Go to support.BISSELL.com for additional how-to videos.

Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not use boiling water. Do not heat water or tank in microwave.

Cleaning Carpets and Area Rugs

Go to support.BISSELL.com for how-to videos and cleaning tips.

Tips Before Cleaning

  • If cleaning an entire room, consider moving your furniture to another area.
  • Use a dry vacuum cleaner over area before using your deep cleaner.
  • Pretreat stains with the CleanShot® pretreater or a BISSELL® Pretreat spray to improve performance on tough, set-in stains.
  • Before cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the rug for colorfastness. Don’t use on silk or delicate rugs.
  • Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.

Cleaning Modes & Instructions

Deep Clean ModeDelivers a deep clean to your carpet.

  1. Hold Spray Trigger
    • 1 pass forward
    • 1 pass back
  2. Release Spray Trigger
    • 1 pass forward
    • 1 pass back

Deep Clean Mode with Antibacterial Formula

  1. Hold Spray Trigger
    • 1 pass forward
    • 1 pass back
    • 1 forward
  2. Release Spray Trigger
    • 1 pass back

Express Clean ModeProvides a lighter clean that dries in about 30 minutes.

  1. Hold Spray Trigger
    • 1 pass forward
    • 1 pass back
  2. Release Spray Trigger
    • 1 pass forward
    • 1 pass back

Cleaning Your Stairs

Go to support.BISSELL.com for additional how-to videos.

Using CleanShot®

Go to support.BISSELL.com for a full list of how-to videos.

WARNINGTo reduce the risk of fire and electric shock:When cleaning a hard surface, the Hard Floor Nozzle and Microfiber Brush Roll must be used and is only to be used with BISSELL® Multi-Surface Floor Cleaning Formula intended for use with this appliance. Visit BISSELL.com to purchase.

Emptying the Dirty Water Tank

Go to support.BISSELL.com for a full list of how-to videos.

WARNINGTo reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

Cleaning & Replacing the Brush Roll and Nozzle

Go to support.BISSELL.com for additional maintenance tips for your machine.

WARNINGTo reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

Using the Rinse & Storage Tray (select models)

Go to support.BISSELL.com for feature videos of your machine.

Storing Your Machine

Visit support.BISSELL.com for additional maintenance tips for your machine.

Store your machine in a protected, dry area. When finished using the product, wrap cord around cord wrap for storage.

NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result.

Warranty

5-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information.

WARNINGTo reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

We’re Waggin’ Our Tails!BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear. Visit BISSELLsavespets.com to learn more.

But wait, there’s more!Join us online for a comprehensive walkthrough to your new product, including troubleshooting, product registration, parts and more. Go to support.BISSELL.com.

©2020 BISSELL Inc. All rights reserved.Printed in China. Part Number 162-2239 12/19 RevAVisit our website at: www.BISSELL.com

Bissell 2529 Jetscrub Pet User Manual – Bissell 2529 Jetscrub Pet User Manual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by