Bissell 38B1/ 1059 Series 3-In-1 Vac User Guide

3-IN-1 VAC™ USER GUIDE

38B1/1059 SERIES

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

  • Always connect to a polarized outlet (one slot is wider than the other). Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
  • Do not leave vacuum cleaner when it is plugged in. Unplug from outlet when not in use and before servicing.
  • Do not use outdoors or on wet surfaces.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
  • Do not use for any purpose other than described in this User’s Guide. Use only manufacturer’s recommended attachments.
  • Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
  • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
  • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
  • Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
  • Do not handle plug or vacuum cleaner with wet hands.
  • Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  • Turn off all controls before plugging or unplugging vacuum cleaner.
  • Use extra care when cleaning on stairs.
  • Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
  • Do not use vacuum cleaner in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
  • Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Do not use without filters in place.
  • Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
  • Use only on dry, indoor surfaces.
  • Keep appliance on a level surface.
  • Do not carry the vacuum cleaner while it is running.
  • Unplug before connecting or disconnecting the TurboBrush® Tool or TurboEraser® Pet Tool (on select models).

SAVE THESE INSTRUCTIONS FOR FUTURE USE

This model is for household use only.

THIS APPLIANCE HAS A POLARIZED PLUG

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

Product View

  1. Hand Grip
  2. Cord Wrap
  3. Power Cord
  4. Handle
  5. Quick Release Handle
  6. Hand Vacuum Grip
  7. Power Switch
  8. Dirt Container Latch
  9. Filter
  10. Dirt Container
  11. Removable Floor Nozzle
  12. Date code and serial number

WARNING

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

WARNING

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

WARNING

To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Operations

How to use your vacuum

WARNING

Do not operate cleaner with damp or wet filters or without vacuum bags and all filters in place.

  1. As a Floor Vacuum:a. Open the latch at the base of the hand vacuum grip and insert handle. Once handle is all the way inserted into the body of the vacuum, press the latch closed to secure the handle in place.b. Attach the floor nozzle by inserting it into the opening at the bottom of the dirt container. Press firmly to secure in place.
  2. As a Hand Vacuum:Release the latch from the handle and pull handle away from the unit. Press the latch closed.
  3. As a Multi-Purpose Vacuum:The floor nozzle may be used with the hand vacuum to clean large surfaces. To attach the floor nozzle to the hand vac, insert it into the opening a the bottom of the dirt container. Press firmly to secure in place.

Power cord storage

  1. Turn Vacuum off (O).
  2. Unplug power cord by grasping the polarized plug, NOT the cord, and disconnect from outlet.
  3. Loop power cord around cord wraps on the handle.
  4. Clip molded plug to power cord to secure.

Maintenance & Care

Emptying the dirt container

WARNING

To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

  1. Turn Vacuum off (O).
  2. To remove dirt from the dirt container and filter, hold the vacuum vertically as shown. Depress and hold latch on top of the vacuum to release the dirt container.
  3. Gently pull dirt container away from the hand vacuum grip and remove the filter as shown. Empty into waste container.
  4. The dirt container may be rinsed with warm water and a mild detergent if needed. The dirt container must be thoroughly dried before replacing.
  5. Replace filter. Attach dirt container to vacuum by depressing latch and securely fitting onto hand grip. Make sure dirt container is correctly secured.

Cleaning the filter

The key to maximum performance is having clean filters. Cleaning the filters after each use will help your 3-in-1 vacuum operate at peak efficiency.

Use only BISSELL replacement filters in your BISSELL 3-in-1 vacuum.

  1. Turn Vacuum off (O).
  2. Follow the steps on page 5 to remove dirt container and main filter. To clean the main filter, shake over a waste container until debris is gone. Place the filter back into the dirt container.NOTE: After heavy usage, you may clean the filter by washing it gently by hand in warm water and mild dish detergent. Rinse thoroughly and make certain it is completely dry before replacing it. If filter is torn, replace it with a new filter.
  3. Attach dirt container to vacuum by depressing latch and securely fitting onto hand vacuum grip. Make sure dirt container is correctly secured.

Troubleshooting

WARNING

To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Please do not return this product to the store. 

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Thank you for selecting a BISSELL product.

For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.

Replacement Parts

These items are available for your BISSELL vacuum. 

Call 1-800-237-7691 or visit www.BISSELL.com

Service

If your BISSELL product should require service:

Visit BISSELL.com or contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area.

If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

Website or E-mail:www.BISSELL.com

Or Call:BISSELL Consumer Care1-800-237-7691Monday – Friday 8am – 10pm ETSaturday 9am – 8pm ETSunday 10am – 7pm ET

Bissell 38B1/ 1059 Series 3-In-1 Vac User Guide – Bissell 38B1/ 1059 Series 3-In-1 Vac User Guide –

[xyz-ips snippet=”download-snippet”]


Posted

in

by