Bissell 80K6 Series Steam Mop Select User’s Guide
Thank You
Thanks for buying a BISSELL Steam Mop™ SelectWe’re glad you purchased a BISSELL Steam Mop Select. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL Steam Mop Select is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL Steam Mop Select .
Thanks again, from all of us at BISSELL.Mark J. BissellChairman, President & CEO
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONSWhen using an electrical appliance, basic precautions should be observed, including the following:Read all instructions before using your Steam Mop™ Select.
WARNING:
To reduce the risk of fire, electric shock, or injury:■ Do not direct steam at people, animals, or at electrical outlets.■ Do not expose to rain.■ Store indoors.■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting.■ Do not leave steam cleaner unattended.■ Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.■ Do not service steam cleaner when it is plugged in.■ Do not handle steam cleaner with wet hands.■ Do not use steam cleaner if it has been dropped, damaged, left outdoors or dropped into water, return it to a service center.■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, or expose cord to heated surfaces.■ Do not unplug by pulling on cord.■ Do not use appliance in an enclosed space filled with vapor given off by oil-base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.■ Do not allow to be used as a toy.■ Do not use on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam-sensitive materials.■ Do not immerse.■ Do not use for any purpose other than described in this User’s Guide.■ Use only manufacturer’s recommended attachments – use of attachments not provided or sold by BISSELL may cause fire, electric shock or injury.■ Never put descaling, aromatic, alcoholic or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.■ Unplug by grasping the plug, not the cord.■ Close attention is necessary when used by or near children.
SAVE THESE INSTRUCTIONS
Commercial use of this unit void the manufacturer’s warranty.
THIS APPLIANCE HAS A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a po;arized plug (one blade is wider then the other) This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. This model is for household use only.
Product view
Optional Accessories
Two-Sided Mop Pads – 2 pack
Assembly
Your Steam Mop Select assembles quickly and easily. Your Steam Mop Select is packaged with the following items:
Handle AssemblyLower BodyTwo sided flip mop head
Removable Water Tank
2 Steam Mop Select Mop Pads
- 1. Attach lower body to two-sided flip mop head by snapping it into place.
- Slide handle assembly down into lower body until it snaps into place.
- Slide water tank onto lower body and gently push tank into place.
Steam Mop Select assembly is now complete
Special features
Removable water tankThe water tank is located on the top of the Steam Mop Select. It can be refilled with water any time during use. Distilled or demineralized water is recommended in place of tap water.Do not use chemicals with yourSteam Mop Select.Indicator lightThe indicator light will glow when the Steam Mop Select is plugged in.Steam on demand triggerPress to release steam.Two-sided flip mop headAllows you to clean in tight spaces and under cabinets. Clean twice as much floor with one pad by flipping the head over. Simply lift the Steam Mop Select off the floor. The flip mop head will spring forward. Place the edge of the mop head on the floor and apply forward or backward pressure depending on which side of the pad you wish to use.Flip mop padsReusable microfiber mop pad is machine washable and safe for all hard floor surfaces. Your Steam Mop select may have come with two different pads. The all-white “soft” pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. The gray and white striped pad can be used for scrubbing heavily soiled floors and tougher messes.
Tip: Do not attempt to use your Steam Mop Select without water in the tank.
Operations
Getting readyThe mop pad may have already come attached to the flip head, if not follow steps 1A and 1B below.
- Attach mop padA. Insert the flip head into the open end of the mop pad.B. Secure the Velcro flaps to ensure the pad is on tighty.
- Fill the water tankA. Remove tank by lifting straight up and away from unit.B. Unscrew cap at bottom of water tank.C. Fill water tank with water. For best results, water should be at room temperature.D. Replace the cap, tighten until snug.E. Replace water tank by gently sliding tank into place.
- Twist the quick release cord wrap clockwise to unwrap the power cord completely and plug into a 120-Volt outlet as described on the Important Safety Instructions.
- The indicator light will illuminate when the Steam Mop Select is plugged in.
Before you cleanThoroughly sweep or vacuum floor prior to cleaning with the Steam Mop Select.Cleaning hard floorsYour Steam Mop Select is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your Steam Mop Select on waxed or some unwaxed floors may result in a diminished glossiness. The Steam Mop Select is not for use on unsealed wood floors. For best results test in an inconspicuous area and check the care instructions froyour flooring manufacturer.
- Plug the unit in and wait 30 seconds for it to heat up. Begin cleaning by slowly passing over surface while pressing the steam ondemand trigger to emit steam as needed.
- To sanitize an area of your floor, (attack invisible germs and bacteria) place the Steam Mop Select over the spot for a minimum 15 seconds using continuous steam, but no longer than 20 seconds using continuous steam. For larger areas, overlap swivel head placement.
- When the mop pad becomes soiled, simply flip the mop head over to use the other side by lifting the Steam Mop Select off the floor. Lift the device off the floor so the flip head springs forward. Place the edge of the mop head on the floor and apply forward or backward pressure depending on which side of the pad you wish to use.NOTE: When cool, the mop head may not immediately spring forward. While in use, the mop head will spring forward as directed.
- When the Steam Mop Select stops emitting steam, unplug the unit. Simply remove the water tank, refill, and continue cleaning.
WARNING:Never put descaling, alcoholic, or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
Maintenance and care
CAUTION:Upright storage of the Steam Mop Select with a wet mop pad may result in the formation of white marks on your floor. To remove the white marks, clean area with vinegar.When you’re done
- Unplug power cord from outlet.
- Carefully remove mop pad from flip head, as mop pad and lower assembly may be hot.
- Any water remaining in the water tank should be emptied prior to machine storage.
- Mop pad can be machine washed in warm water. Use only liquid detergents. Do not use fabric softeners. For best results, air dry.
- Wrap power cord around quick release cord wrap on side of Steam Mop Select.
- Wipe all surfaces of Steam Mop Select with a soft cloth. Store upright in a protected, dry area
Troubleshooting
Reduced steam or no steam.
Possible Causes Remedies1. Water tank empty 1. Fill tank
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Thank you for selecting a BISSELL product.Please do not return this product to the store.For any questions or concerns, BISSELL is happy to beof service. Contact us directly at 1-800-263-2535
Replacement parts- BISSELL Steam Mop™ Select
Item: Part No.: Part Name1 203-7738: Handle Assembly2 203-7734: Water Tank with Cap and Insert3 203-7735: Cap and Insert Assembly
Additional Accessories
Item: Part No.: Part Name1 29H9-A: Replacement Mop Pads – 2 pack2 203-2168: Sorage Hook with Screws
BISSELL consumer services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-263-2535Monday – Friday 8 a.m. — 10 p.m. ETSaturday 9 a.m. — 8 p.m. ETOr write: BISSELL Homecare, Inc. PO Box 3606 Grand Rapids MI 49501ATTN: Consumer Services Or visit the BISSELL website – www.bissell.caWhen contacting BISSELL, have model number of cleaner available.Please record your Model Number: __________________Please record your Purchase Date: ___________________NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty on page 12 for details.
Warranty
If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Canada Corporation will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part. See information below on “If your BISSELL product should require service”. This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to routine maintenance components such as belts or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User’s Guide is not covered.If your BISSELL product should require service:Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area orvisit our website – www.bissell.caNOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.If you need information about repairs or replacement parts, or if you have questions about yourwarranty, contact BISSELL Consumer Services.Website: www.bissell.caE-mail: [email protected]Or Call: BISSELL Consumer Services 1-800-263-2535Monday – Friday 8 a.m. – 10 p.m. ETSaturday 9 a.m. – 8 p.m. ETOr write: BISSELL Homecare, Inc.PO Box 3606, Grand Rapids MI 49501ATTN: Consumer ServicesBISSELL CANADA CORPORATION IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTYTHIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE
Bissell 80K6 Series Steam Mop Select User’s Guide – Bissell 80K6 Series Steam Mop Select User’s Guide –
[xyz-ips snippet=”download-snippet”]