BISSELL Pet Hair Eraser Slim Cordless Vacuum Cleaning Filters Instruction Manual
Pet Hair Eraser Slim Cordless Vacuum Cleaning Filters | Support
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove Dirt Tank from Hand Vac
- Grip the top portion of tank and pull up to remove the separator (the bottom ring of the separator will activate to “wipe” debris from screen & deposit into tank)o Clean debris from Separatoro Empty debris from Dirt Tank
• Twist the top to remove Filter from Separatoro Remove Pre Motor Filter and clear debris (machine should not be used without Filters installed)• Pre Motor Filter can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
• Insert the Filter with tag towards the Filter Frame• Insert Filter Frame into Separator > Separator into Dirt Tank• Attach Dirt Tank to Hand Vaco You should hear a click when Tank is secure
• The Post Motor Filter is located on the back of the Hand Vaco Pinch the latch on the back of the Hand Vac > Remove Filter Covero Press up on bottom tab to pull Filter outo Post Motor Filter can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
[xyz-ips snippet=”download-snippet”]