BLACK BOX KVD200-2H 2-Port 4K HDMI DH KVM Switch User Manual![]()
1. SPECIFICATIONS
TABLE 1-1. SPECIFICATIONS
CHAPTER 2: OVERVIEW
2.1 INTRODUCTION
The 2-Port 4K HDMI Dual-head KVM Switch allows the control of two computers with 4K dual HDMI video output via a single console set of USB keyboard/mouse/hub, microphone, speaker, and display. The 2-Port 4K HDMI Dual-head KVM Switch has built-in USB 3.2 Gen 1 compliant and 3.5-mm mini stereo ports that allow sharing of USB keyboard/mouse/hub, speaker, and microphone among the connected computers. Switch between the connected computers using the front-panel pushbutton or keyboard hotkey commands. The switch includes a USB-C interface for high-speed data transfer/high-speed peripherals. Product setup is quick and simple with no software to install, so you’re ready to go right out of the box.
2.2 FEATURES
- Control two computers via one USB console.
- Support computers with resolutions up to 4K UHD (3840 x 2160 @ 60 Hz) dual HDMI video output
- Complies with HDMI 2.0 , DisplayPort 1.2, and HDCP 2.2 standards.
- PC source video — dual input: (1) HDMI, (1) DisplayPort
- Switch by pushbutton and keyboard hotkeys.
- Computers and devices can be unplugged and re-plugged without having to shut down the KVM switch.
- Indicate the connected computers’ statuses clearly via LEDs.
- USB 3.2 Gen 1 compliant keyboard/mouse enable you to control the computer conveniently and easily.
- USB 3.2 Gen 1 Hub: USB transparency is suitable for a variety of peripherals. Includes a USB-C interface for high-speed data transfer/high-speed peripherals.
- 3.5-mm mini stereo ports (speaker and microphone) support the computer’s audio line in/out.
- No software drivers are needed.
2.3 WHAT’S INCLUDED
Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Supportat 877-877-2269 or
- (1) 2-Port 4K HDMI Dual-head KVM Switch (with audio line in/out and USB hub)
- (1) External Power Supply (Input: 100 to 240 V, 50/60 Hz, 0.4 A; Output: 5 V, 2 A) (includes US, EU, UK, AU plug types)
CHAPTER 2: OVERVIEW]
2.4 HARDWARE DESCRIPTION
Figure 2-1 shows the front panel of the KVM switch. Figure 2-2 shows the back panel. Tables 2-1 and 2-2 describe the components.
FIGURE 2-1. FRONT PANEL
TABLE 2-1. FRONT-PANEL SWITCH COMPONENTS
*It only supports data transmission for USB peripherals, such as USB Flash Drive.
CHAPTER 2: OVERVIEW
FIGURE 2-2. BACK PANEL
TABLE 2-2. BACK-PANEL SWITCH COMPONENTS
| NUMBER IN FIGURE 2-2 | COMPONENT | DESCRIPTION |
| 1 | (1) Power DC Jack | Connect the power supply to the KVM switch here |
| 2 | (1) Audio jack | Microphone port for PC-1 |
| 3 | (1) Audio jack | Speaker/Earphone port for PC-1 |
| 4 | (1) HDMI connector | HDMI input for PC-1 |
| 5 | (1) USB Type B connector | USB port for PC-1 |
| 6 | (1) DisplayPort connector | DisplayPort input for PC-1 |
| 7, | (1) Audio jack | Microphone port for PC-2 |
| 8 | (1) Audio jack | Speaker/Earphone port for PC-2 |
| 9 | (1) HDMI connector | HDMI input for PC-2 |
| 10 | (1) USB Type B connector | USB port for PC-2 |
| 11 | (1) DisplayPort connector | DisplayPort input for PC-2 |
CHAPTER 3: INSTALLATION
3.1 INSTALLATION STEPS
Refer to the following diagrams and steps to set up your KVM switch installation.
3.1.1 CONSOLE SIDE
FIGURE 3-1. CONSOLE SIDE (FRONT VIEW)
- Connect HDMI monitors to the “HDMI Out” console ports on the front panel of the KVM switch.
- Connect your USB keyboard and USB mouse directly to the USB keyboard and mouse ports on the front panel of the KVM switch.
- Connect the microphone and speaker to the corresponding 3.5 mm Mini Stereo console jacks on the front panel of the KVM switch.
- Connect your USB devices into the USB ports. (Optional)
CHAPTER 3: INSTALLATION
3.1.2 PC SIDE
FIGURE 3-2. PC SIDE (BACK VIEW)
- Be prepared with the related cables, plug the DisplayPort/HDMI, USB, microphone, and speaker connectors into their corresponding sockets on the back panel of the KVM switch
- At the other end of the cable set, plug the DisplayPort/HDMI, USB, microphone, and speaker connectors into their respective ports on the first computer (PC-1).
- Repeat above steps to add the second computer (PC-2).
- Connect the power supply to the KVM switch, and then plug it into an appropriate power source.
- Turn on the power to all connected devices.
CHAPTER 4: OPERATION
There are two ways to access computers and devices connected to the KVM switch:
- Manual Pushbutton
- Hotkeys
Press the pushbutton once, switching the selected PC port among the two connected computers cyclically.
4.1.2 HOTKEY COMMANDS
Hotkey commands are executed using only the keyboard.The following procedure describes the hotkey functionality availability.Hotkey Execution Procedure
- Press the [Scroll Lock] key twice continuously to enter Hotkey mode. While in Hotkey mode, the Scroll Lock LED of the keyboard flashes continuously. When entering or exiting from Hotkey mode, the buzzer of the KVM switch beeps.
- Press the [Scroll Lock] key twice continuously within 5 seconds.
- Key in the hotkey command within 10 seconds, or it will be aborted if the time exceeds 10 seconds.
TABLE 4-1. HOTKEY COMMANDS
APPENDIX A: REGULATORY INFORMATION
A.1 FCC CLASS A STATEMENT
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in SubpartB of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of Industry Canada.
APPENDIX B: DISCLAIMER/TRADEMARKS
B.1 DISCLAIMER
Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation may revise this document at any time without notice.
B.2 TRADEMARKS USED IN THIS MANUAL
Black Box and the Black Box logo type and mark are registered trademarks of Black Box Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]