BLACK DECKER BL2110BP 10-Speed Blender with Glass Jar User Manual
IMPORTANT SAFEGUARDS
When using electrical appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and/or injury, including the following:
- Read all instructions.
- To protect against risk of electrical shock, do not put blender base, cord or plug in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
- Avoid contacting moving parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Contact the consumer service number listed in this manual.
- This appliance has important markings on the plug blade. The attachment plug or entire cord set (if plug is molded onto cord) is not suitable for replacement. If damaged, the appliance must be replaced.
- The use of attachments, including canning jars, not recommended or sold by the appliance manufacturer may cause fire, electric shock or injury.
- Do not use outdoors.
- Do not let the plug or cord hang over the edge of table or counter.
- Do not place on or near a hot gas or electric burner or in a heated oven.
- Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
- Blades are sharp. Handle carefully.
- To reduce the risk of injury, never place blade assembly on base without the jar properly attached.
- Always operate blender with cover in place.
- Do not blend hot liquids.
- Do not use appliance for other than intended use.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS
This product is for household use only.
SAFETY FEATURES
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD
- A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
- Extension cords are available and may be used if care is exercised in their use.
- If an extension cord is used,
- The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance,
- If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and
- The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
Note: If the power cord is damaged, please contact the warranty department listed in these instructions.
GETTING TO KNOW YOUR BLENDER
- Dual-opening lid (Part# BL2110-01)
- Pour spout
- Ingredient slot
- Blending jar (Part# BL2110-02)
- Handle
- Blade assembly (Part# BL2110-03)
- Gasket
- Jar base (Part# BL2110-04)
- Blender Base
- Pulse/OFF button
- LO button
- HI button
- Speed buttons
HOW TO USE
This product is for household use only.
GETTING STARTED
- Remove all packing material, any stickers from the product, and the plastic band around the plug.
- Remove and save literature.
- Please visit www.prodprotect.com/blackanddecker to register your warranty.
- Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
BLENDER JAR ASSEMBLY
- Turn blending jar upside down and place flat on counter top or work surface.
- Place the gasket against the glass jar.Important: Gasket MUST be between the jar and blade assembly or the blender will not function properly.
- Place the blade assembly, blade first, into the jar. (A).
- Place jar base onto jar and rotate clockwise until it is tight (B).
- Turn assembled jar right side up.
- Place lid onto blending jar.Note: Do not plug in the cord.
- Place on base, making sure it is pressed firmly into place. (Jar base should not extend more than 1⁄8-inch above the rim at the top of the base.)
USING YOUR BLENDER
Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
- Make sure appliance is OFF.
- Place foods to be blended into jar. For best results place ingredients in jar in the following order: liquids, powders, soft foods, hard foods, ice.
- Place lid on jar. Make sure the pour spout and ingredient slot are closed.
- Plug power cord into outlet.Note: When in use, do not leave blender unattended. When using hard foods, such as ice or cheese, keep one hand on the lid to keep blender in place.
- Select the speed that best suits your desired task. (See SPEED CHART)Note: Use PULSE for no more than five seconds at a time, allowing the blender to rest briefly between each pulse, no more than two minutes total. This helps break up the ice and distribute the ingredients.
- Open the ingredient slot to add ingredients while the blender is running. Drop ingredients through the opening. (C).Important: Do not remove the lid while the blender is running.
- When finished, press the OFF button. Make sure blades have completely stopped before attempting to remove the blending jar from the base.
- To remove the jar, grasp the handle and lift up.
- Open pour spout to serveNote: Always unplug the appliance when not in use.
BLENDING TIPS AND TRICKS
- Cut food into pieces no larger than ¾” for use in the blender.
- When preparing foods that have several different kinds of ingredients, always add liquid ingredients first.
- When ingredients splatter onto the sides of the jar or the mixture is very thick, press the OFF button to turn appliance off. Remove th lid and use a rubber spatula to scrape down the sides of the jar and to redistribute the food, pushing food toward the blades. Replace the lid and continue blending.
- When making bread crumbs make sure blender jar is completely dry.
- When using PULSE function; use short bursts. Allow the blades to stop rotating between pulses. Do not use PULSE for more than 2 minutes.
- Use the Pulse button when preparing beverages that include ice cubes or anything frozen; this helps to produce a smoother texture.
- It is helpful to begin the blending process on the lowest speed and then increase to a higher speed, if necessary.
- To stop blending at any time, press the OFF button.
- Do not store foods in the blending jar.
- Do not overfill the blender (the blender is more efficient with less rather than more).
- Do not run blender for longer than 1 ½ minutes at a time. Scrape down sides of blending jar, if necessary, and continue blending
- Do not use if blending jar is chipped or cracked.
- It is not recommended to use your blender to beat egg whites, mix dough, mash potatoes, or grind meatsDO NOT PLACE ANY OF THE FOLLOWING IN THE BLENDER:
- Large pieces of frozen foods
- Tough foods such as raw turnips, sweet potatoes and potatoes
- Bones
- Hard salami, pepperoni
- Hot liquids
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
CLEANING
- Before cleaning, turn off and unplug appliance.
- Lift blending jar by handle off power base.
- Remove jar base by turning counterclockwise until loose.
- Remove gasket and blade assembly.Caution: Blades are sharp, handle carefully.
- Remove lid.
- Wash removable parts by hand or in your dishwasher. Place jar on bottom rack and rest of parts on top rack only.
Important:
- Do not place jar parts in boiling liquids.
- Do not immerse base in liquid. Wipe base with damp cloth and dry thoroughly.
- Remove stubborn spots by rubbing with damp cloth and nonabrasive cleaner.
Note: If liquids spill onto base, wipe with damp cloth and dry thoroughly. Do not use rough scouring pads or cleansers on parts or finish.
QUICK CLEANINGFor quick cleanup, combine 1 cup warm water and a drop of liquid dish soap in the blending jar. Cover and blend on Clean for about 30 seconds. Discard liquid and rinse jar thoroughly.
STORAGEFor convenient storage, wrap the cord around the feet on the bottom of the blender base
SPEED CHART
Pulse/Off |
|
LOW | |
1) Stir |
|
2) Blend |
|
3) Crumb |
|
4) Clean |
|
5) Grate |
|
HIGH | |
6) Beat |
|
7) Puree |
|
8) Liquefy |
|
9) Smoothie |
|
10) Ice Crush |
|
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
Jar bottom does not come off of jar. | A vacuum has been formed. | Place the jar on the blender and turn counter clockwise until jar is released from the bottom. |
Liquid is leaking from bottom of jar. | Gasket is either missing or not in place correctly. | Check that jar is assembled correctly. |
Appliance does not turn on. | Appliance is not plugged in. | Check that appliance is plugged into a working outlet. |
Mixture in blender does not seem to be blending. | Not enough liquid in mixture being blended or too much ice. | Turn the blender off and use a rubber spatula to redistribute the food; add some liquid and pulse the mixture to aid in the blending process. |
Herbs or bread are sticking to sides of blender and not getting chopped. | Blender jar, food to be chopped and blade are not dry. | Always make sure that the jar, the blade and the food to be chopped are dry. |
Food chopped is too fine or watery. | Food is over processed. | Use Pulse in short bursts or blend for a shorter time. |
RECIPES
WILD BERRY YOGURT COOLER2 cups pineapple juice1 cup wild berry frozen yogurt1 cup frozen cubed mango1 cup frozen hulled strawberriesCombine all ingredients in order listed into blending jar and close with lid. Pulse for several seconds (three to four times). Select Smoothie and let cycle run until mixture is smooth and well blended; about 30 seconds.Makes about 41/2 cups.
MANGO AND CORN SALSA
1/2 cup orange pepper, cut into 3/4-inch chunks1/2 cup purple onion, cut in 1/2-inch pieces2 to 3 medium jalapeños, seeded and quartered2 large cloves garlicJuice of 1 lime11/2 cups tomato, cubed1 large mango, cubed1/2 cup fresh cilantro leaves1 cup canned whole kernel cornIn blending jar, combine pepper, onion, jalapeños and garlic. Place lid on jar. Pulse several times, for about 5 seconds each, to chop ingredients. Add lime juice, tomato, mango and cilantro and Pulse several times until vegetables are chopped and mixture is blended. Spoon mixture into bowl; stir in corn. Cover and refrigerate until ready to serve. Serve with tortilla chips.Makes about 41/2 cups.
WARRANTY AND CUSTOMER SERVICE INFORMATION
Two-Year Limited Warranty(Applies only in the United States and Canada)
For service, repair or any questions regarding your appliance, call the appropriate 800 number listed within this section. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.
What does it cover?Any defect in material or workmanship provided; however, Spectrum Brands Inc’s liability will not exceed the purchase price of product.
For how long?Two years from the date of original purchase with proof of purchase.
What will we do to help you?Provide you with a reasonably similar replacement product that is either new or factory refurbished.
How do you get service?
- Save your receipt as proof of date of sale.
- Visit the online service website at www.prodprotect.com/blackanddecker, or call toll-free 1-800-465-6070, for general warranty service.
- If you need parts or accessories, please call 1-800-738-0245.
How does state law relate to this warranty?This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.
What does your warranty not cover?
- Damage from commercial use
- Damage from misuse, abuse or neglect
- Products that have been modified in any way
- Products used or serviced outside the country of purchase
- Glass parts and other accessory items that are packed with the unit
- Shipping and handling costs associated with the replacement of the unit
- Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
Are there additional warranty exclusions?This warranty shall not be valid where it is contrary to U.S. and other applicable laws, or where the warranty would be prohibited under any economic sanctions, export control laws, embargos, or other restrictive trade measures enforced by the United States or other applicable jurisdictions. This includes, without limitation, any warranty claims implicating parties from, or otherwise located in, Cuba, Iran, North Korea, Syria and the disputed Crimea region.
References
[xyz-ips snippet=”download-snippet”]