Blackstar DEPT 10 DUAL DISTORTION Owner’s Manual

DEPT. 10

DUAL DISTORTIONOwner’s Manualthe sound in your head

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, the UK For the latest information go to: www.blackstaramps.comWhilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.

Designed and Engineered by Blackstar Amplification UK

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings.
  8. Install in accordance with the manufacturer’s instructions.
  9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
  11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  12. Only use attachments/accessories specified by the manufacturer.
  13. Unplug this apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

“TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE”. “WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.

This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN

Introduction

Thank you for purchasing this Blackstar valve effects pedal. Like all our products this pedal is the result of countless hours of painstaking research and Development by our world-class design team. DEPT. 10 is the Blackstar R&D team responsible for blue-sky innovation and design. Based in Northampton (UK), the Blackstar team are all experienced musicians themselves and the sole aim of the development process is to provide guitarists with products that are the ultimate tools for self-expression. All Blackstar products are subjected to extensive laboratory and road testing to ensure that they are truly uncompromising in terms of reliability, quality, and above all TONE. If you like what you hear and want to find out more about the Blackstar range of products please visit our website at www.blackstaramps.com. Thanks! The Blackstar Team

Features

The DEPT. 10 offers the ultimate high voltage valve distortion flexibility. Channel 1’s Clean and Crunch modes let you move from clean, to boost to overdrive. Channel 2 then takes you from super crunch right up to screaming lead. The Cab Rig output enables you to get the sound in your head from any speaker including headphones, studio monitors, and front of the house. The unique switching operation will transform a single channel vintage amp into a three-channel tone machine. Use the patented ISF (Infinite Shape Feature) control to take your tone from the USA to the UK and anywhere in between. The array of controls over your dynamics, EQ, speaker response, and speaker environment, you now have all the tools to achieve ‘The sound in your head’.

Controls – Top

  1. InputPlug your guitar in here. Always use a good-quality screened guitar lead.
  2. Gain 1This Gain control adjusts the amount of overdrive or distortion that Channel 1 will deliver. As the Gain control is increased clockwise (CW) the sound will become more overdriven moving through crunch tones until, at its maximum position, a full distorted crunch tone is reached.
  3. Level 1This Level control sets the overall level or volume from Channel 1 of the pedal. It should be used in conjunction with the Gain 1 control to achieve the exact type of drive you require. Generally speaking, at lower Gain settings, the Volume will be increased and at higher Gain settings the Volume should be decreased.
  4. Channel 1 Clean/Crunch Mode SwitchThis switch enables Channel 1 to be set up as a Clean or Crunch channel. The Crunch channel can also be used as a clean boost by running the level high and the gain low. This will add further saturation to an already overdriven amplifier.
  5. BassThe Bass control adjusts the number of low-end frequencies in your tone. This pedal has an advanced tone shaping circuit (shared by Channel 1 and Channel 2) which allows the tone to be tight and cutting, counterclockwise (CCW), to warm and thumping (CW).
  6. MiddleThe Middle control adjusts the number of middle frequencies in your tone. The middle frequencies are particularly important in getting the amount of ‘body’ your tone has. With the Middle control set to its minimum position (fully CCW), the sound will be aggressive and scooped, this is a tone ideal for aggressive rhythm playing. As the Middle control is increased (CW) the amount of ‘body’ is increased, which is moresuitable for sustained lead guitar tones.
  7. TrebleThe treble control allows exact adjustment of the treble frequencies within the sound. At low settings (CCW) the sound will be warm and darker in character. As the Treble control is increased (CW) the sound will become brighter. At the maximum settings, the sound will be aggressive and cutting.
  8. ISF (Infinite Shape Feature)The patented ISF control works in conjunction with the Bass, Middle, and Treble control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic that is more ‘woody’ and less aggressive. See illustration below.We recommend that to start with the ISF is set to halfway and the Bass, Middle, and Treble are set to taste. Then try gradually adjusting the ISF CW and CCW until you find the sound you prefer.
  9. Gain 2This Gain control adjusts the amount of overdrive or distortion that Channel 2 will deliver. As the Gain control is increased (CW) the sound becomes more overdriven moving through crunch tones until, at its maximum position, a full distorted lead tone is reached.
  10. Level 2This Level control sets the overall level or volume from Channel 2 of the pedal. It should be used in conjunction with the Gain 2 control to achieve the exact type of drive you require. Generally speaking, at lower Gain settings, the Volume will be increased and at higher Gain settings the Volume should be decreased.
  11. Cab Rig SwitchSelect one of three Cab Rig environments. You can deep edit and load in your own Cab Rig settings using the free Architect software.
  12. Valve GuardThrough this guard, you can see the ECC83 valve at the heart of your pedal. WARNING: Do not attempt to remove the fixing screws or guard. No user-serviceable parts inside.
  13. Channel 2 Overdrive 1/Overdrive 2 Mode SwitchThis switches Channel 2 between Overdrive 1 or Overdrive 2 voicing. Overdrive 2 gives more gain and saturation with a slight lift in presence, achieving a great sustaining lead tone.
  14. OutputThis output is designed for connection to the input of other pedals or the input of a valve solid-state, digital or hybrid amplifier. For best noise performance we recommend you place the overdrive pedal first in the effects chain. The built-in buffer/line driver is perfect for preserving your tone when using long cables, or large pedalboards, even driving low impedance pedals like many wah-wahs. Always use a good qualityscreened guitar lead.
  15. Cab Rig OutputCab Rig is our next-generation DSP speaker simulator that reproduces the sound and feel of a mic’d up guitar cab in incredible detail. Deep dive edit, make custom patches for your cabinet, microphone power amp, and more by plugging your pedal into our free Architect software via USB. This source will output the selected Cab Rig switch preset, , Left = 1, Middle = 2 and Right = 3. This output has the selected Cab Rig preset applied. A DI signal can be selected within the Cab Rig software to bypass the cabinet simulation.NOTE: Cab Rig output also features a low noise and low distortion headphone driver circuit which can drive all standard headphone impedances and can be used for silent practice.Download Architect here: https://www.blackstaramps.com/uk/architect
  16. Channel 1 On/Off LEDWhen the WHITE LED is on Channel 1 is on. When the LED is not on, Channel 1 is off.
  17. Channel 1 On/Off FootswitchPress this switch to turn Channel 1 on or off.
  18. Channel 2 On/Off LEDWhen the RED LED is on Channel 2 is on. When the LED is not on, Channel 2 is off.
  19. Channel 2 On/Off FootswitchPress this switch to turn Channel 2 on or off.

Controls – Rear

  1. FX Loop SendConnect the (mono) input of an external effects unit here. Insert any externaleffects you want to keep clean such as reverb, delay, or modulation.
  2. FX Loop ReturnConnect the (mono) output of an external effects unit here.
  3. DC InletFor the input of the 9V DC / 500mA adaptor supplied. Only use the included power supply.
  4. USB Audio OutputPlug a USB cable in here to connect the amplifier to a Windows PC or Mac. The amplifier will appear on a personal computer as an audio capture device within recording software. This source will output the selected Cab Rig switch preset. A DI can be selected within the Cab Rig software to bypass the cabinet simulation.
  5. XLR Line/DI OutputA balanced output for connection to a PA, mixing desk, or interface for recording and monitoring. This source will output the selected Cab Rig switch preset. A DI can be selected within the Cab Rig software to bypass the cabinet simulation.

DEPT. 10 DUAL DISTORTION

Power: 9V DCMaximum Current Draw: 500mAValve: 1 x ECC83 / 12AX7Input Impedance: 1MΩOutput Impedance: < 1KΩWeight (kg): 0.63Dimensions (mm): 157(W) x 76(H) x 117(D)DC Adaptor: PSU-500 supplied (9VDC 500mA tip negative)

report this ad

BLACK

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , ,