BLAUPUNKT Air Purifier AP1.1 Instructions

Table of Contents

BLAUPUNKT Air Purifier AP1.1 Operating and Installation Instructions

CAUTIONS

Safety Notes

Do not dean or spill liquids or flammable solvents on the device.
Clean with soft doth only. Disconnect AirPure before cleaning.
Handle with care. Do not drop. Keep it away from electric & magnetic area.
Keep AirPure free of any object obstructing the air flow.
Do not let children play with air purifier.
Do not operate the device while driving.
Use the power cable provided only.

Disclaimer

In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages to property or life and whatsoever arising out of or connected with the use or misuse of our products. USA & CANADA:This product is not intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased on as-is basis. No warranty, whether expressed or implied is provided in the U.S. or Canada.

STRUCTURE & FUNCTIONS

Functions

Air Outlet
Power Supply Port
Air Inlet
Bottom Cover
• APF1 Filter (Pre Alter, HEPA Filter, Activated Carbon Alter)• Aroma Holder
PM2.5 Sensor
Turbo Fan
Buzzer
Ultraviolet Germicidal Lamp
Touch Control (Power Button and Fan Speed Control)
PM2.5 Indicator
Filter Replacement Reminder
Fan Speed Indicator

SPECIFICATIONS

Indicator Display: PM2.5 Level, Filter Replacement Reminder, Auto/Manual Fan Speed
Pre-packed with Blaupunkt AirPure Filter (APF1)
Noise Level: ≤35dB
Fan Type: Double inlet DCTurbo Fan
HEPA Filter Grade: H11
UltravioletWavelength: 253.7nm
Applicable for space: 5m³-11m³
InputVoltage: 5V
Current: 1A
Power: <5W
Dimensions: 71 mmx 195mm
NetWeight: 425g
Accessories: USB Power Cable

TROUBLESHOOTING

If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt authorized dealer if problem persist.

OPERATION INSTRUCTION

Air Purifier

a) Connect USB charger to the 5V/1A power supply input ofAir Purifier. Air purifier will have buzzing sound and Illumination on the Air Outlet when turn on.b) Air Purifier will begin operating at auto-detection status (low fan speed) when turn on. (It will automatically switch fan to high speed when the PM2.5 value is at 50pµ/m³ or above. Turn On (Blue Indicator)
Power Buttona) Turn On/Off• Press to turn on Air Purifier, press again to adjust fan speed (On/ Low/Hi/Off).b) After Filter Replacement• Press and hold for 3 seconds on the power button to reset filter replacement reminder.
The colour of the indicator will change according to PM2.5 Valuea) PM2.5 Value: 0 to 50µpg/m³ Good Air Quality (Blue Indicator)b) PM2.5 Value: 51 to99µg/m³ Average Air Quality (Green Indicator)c) PM2.5 Value: 100 to 999µg/m³ Bad Air Quality (Red Indicator)