Blueair HealthProtect™User Manual
Blueair HealthProtect™ 7400/7700 Series
| Product name: | Model number: | Model number: |
| 10-models | 100-127VAC | 220-240VAC |
| 7410i | 7.41E+09 | 7.42E+09 |
| 7710i | 7.71E+09 | 7.72E+09 |
| 40-models | ||
| 7440i | 7.41E+09 | 7.42E+09 |
| 7740i | 7.71E+09 | 7.72E+09 |
| 70-models | ||
| 7470i | 7.41E+09 | 7.42E+09 |
| 7475i | 7.41E+09 | 7.42E+09 |
| 7770i | 7.71E+09 | 7.72E+09 |
| 7775i | 7.71E+09 | 7.72E+09 |
Hereby, Blueair AB, declares that the radio equipment types in the above table are in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.blueair.com/customer-support
Please read this user manual carefully and keep it for future reference.The latest version of this user manual can be found on www.blueair.comNote: There may be local variations of these models.
Blueair HealthProtect™
Blueair HealthProtect™ air purifiers are available in three models, the 10-models, the 40-models, and the 70-models. All models are Wi-Fi enabled, have a GermShield TM function to prevent bacterial growth, pre-filters, and the main filter to purify the air.
All HealthProtect™ models have control functions and built-in sensors. The 40-models and the 70-models have additional indications for air quality data. The 40-models have a display for particulate matter data. The 70-models have a dynamic screen control, with additional functions for particles, gases (VOC), temperature, relative humidity, and filter lifetime.
You can change the air purifier settings at any time, using the control panel on the air purifier or remotely using the Blueair app. Additional functions are available for all models through the Blueair app.
Recommendations for best performance
- Use the air purifier in a room that does not exceed the room size recommendation.
- Place the air purifier in a location where air can circulate freely in, out, and around the air purifier.
- Do not place the air purifier closer than 10cm to another object.
- During operation, keep doors and windows in the room with the air purifier closed.
- Run the air purifier 24 hours per day with the GermShieldTM function on.
- Only use genuine Blueair filters.
- Change the main filter when the filter replacement indicator appears on the control panel.
- Follow the maintenance instructions in this user manual.
Blueair air purifiers are mainly composed of a motor, a fan, and a filter. The air purifier removes contaminants from the air in a room to improve indoor air quality.
| A Control panelB HandleC Air outletD Air quality sensor inletsE Air inletF Feet and wheels | G Pre-filtersH Filter doorI Main filterJ Fan and motorK Power cable (not in picture)L User Manual (not in picture) |
Safety instructions
Blueair HealthProtect™ air purifiers are electrical appliances for indoor use only, take the necessary precautions to reduce the risk of fire, electric shock, or injury.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mentalcapabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Always disconnect the appliance from the power supply before maintenance.
- Do not alter the power plug in any way and do not attempt to open or service the appliance yourself. Service must be done by the manufacturer, service agent, or similarly qualified person using only genuine Blueair spare parts.
- Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazards, a damaged power cable must always be replaced by the manufacturer, service agent, or similarly qualified person.
- If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply and contact Blueair.
- The power plug must be firmly inserted into the power socket.
- When disconnecting the unit from the power supply, do not pull the power cord, pull the power plug.
- Use the grounded power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, grounded electrical outlet. Refer to the rating label on your appliance.
- Do not use an extension cord or a power strip. Refer to the rating label on your appliance.
- Do not alter the power plug in any way. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet.
- Do not use the included power cord for anything else but the appliance.
- Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance.
- Do not place any objects on top of or directly against the appliance.
- Do not sit on, stand, climb onto or hang from the appliance.
- Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fire.
- Keep the appliance and power plug away from water and other liquids.
- Keep the appliance and power plug away from chemicals such as pesticides and deodorants.
- Place the appliance on the floor. The appliance must be placed on a stable surface.
- Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms, or pool areas.
- Cleaning and maintenance shall not be made by children without supervision.
Get started
Step 1Open the filter door, pull out the main filter and remove the protective wrapping.Step 2Put the main filter back into the air purifier and close the filter door.
See section Filters for more information regarding filter handling.
Plug into the power supply
Step 1If your air purifier has a removable power cable, plug the cable firmly into the power cable socket on the air purifier.
Step 2Plug the power cable into a grounded wall outlet.Step 3Press the On/Off button to turn the air purifier on.
Note! For some markets, the air purifier is equipped with a fixed power cable due to regulatory requirements.Tip! Store any excess cable length in the cable winder under the air purifier.
Connect to the Blueair appConnecting the air purifier to the Blueair app allows you to control the air purifier and change the settings remotely. The app adds additional functions to the air purifier.Step 1Download the Blueair app from the App store or Google play.Step 2Open the Blueair app and follow the instructions to connect the air purifier.
Control panel
All HealthProtect™ models have controls, a filter indicator, and air quality information. The 40-models and the 70-models have additional indications for air quality data. The 40-models have a display for particulate matter data. The 70-models have a dynamicscreen control, with additional functions for particles, gases (tVOC), temperature, relative humidity, and filter lifetime.
ControlsControl the air purifier using the buttons on the control panel or by using the Blueair app.
Note! Wi-Fi, sensors, and the GermShield TM function continue to be in operation when the air purifier is turned off.
Auto modeIn auto mode, the air purifier automatically controls the airflow based on air quality information from the sensor.
Auto Press to Activate or Deactivate.
| Indicators 10-models/40-models | Indicators 70-models |
 |
 |
Airflow speedAvailable airflow speed options are 1, 2, 3, and 0.
 |
Press to switch between the different airflow speeds. |
| Indicators 10-models/40-models | Indicators 70-models |
 |
 |
GermShield TMThe air purifier has a GermShield TM function that activates when a germ-prone environment is detected. The 70-models have an additional indicator on the screen for showing when the GermShield TM function is in operation.
 |
Press to Activate or Deactivate. |
| Indicators 10-models/40-models | Indicators 70-models |
 |
 |
Note! When GermShield TM is activated, a light draft can come from the air purifier when detecting a germ-prone environment.
Wi-Fi ConnectionA Wi-Fi function is available on all models and allows the air purifier to connect to the Blueair app and to receive functional updates. If you do not wish to be connected to Wi-Fi, press the Wi-Fi button to disable the Wi-Fi function.
 Button |
Press for >15s to turn Wi-Fi on or off. |
Indicators (10-models and 40-models)
 |
Status White lightConnected to Wi-Fi network. |
 |
Status White “pulsating” lightWi-Fi On, ready for onboarding. |
 |
Status No lightWi-Fi functionality Off. |
 |
Status White fast “blinking” lightFailed to connect. |
Indicators LCD screen (70-models)
 |
Status Green checkmark On. |
 |
Status Red cross Off. |
 |
Status Red exclamation Connection error. |
Indicators Buttons (70-models)
 |
Status White light Connected to Wi-Fi network. |
 |
Status White “pulsating” light Wi-Fi On, ready for onboarding. |
 |
Status dimmed light Wi-Fi functionality Off. |
 |
Status White fast “blinking” light Connection error. |
See the Blueair app for further information regarding Wi-Fi connection.For support, visit www.blueair.com/customer-support
Filter indicatorThe air purifier calculates the remaining lifetime of the filter based on usage and sensor readings and indicates when it is time to replace the filter.
Indicators (10-models and 40-models)
 |
Status Filter replacement No lifetime left of the filter. |
 |
Status Filter replacement “blinking” Cannot recognize a Blueair filter /No filter detected. |
Indicators (70-models)
 |
Status Filter replacement No lifetime left of the filter. |
 |
Status New filter Filter change completed. |
 |
Status Filter warning Cannot detect a Blueair filter. |
 |
Status No filter No filter detected. |
See Troubleshooting for more information on filter indicators.
Category indicators (70-models)The categories of the different functions are indicated on the top of the screen- press the buttons on the control panel or on the left and right arrow to view the data for the chosen category.
 |
Particle data |
 |
Temperature |
 |
Relative humidity |
 |
Gas data |
 |
Filter lifetime |
Air quality information The air quality levels for particulate matter (PM) and gases (tVOC) are indicated using a color scale on the control panel.
| PM1 | Particulate matter, particles with a diameter of size 1 micrometer or less. |
| PM10 | Particulate matter, particles with a diameter of size 10 micrometers or less. |
| PM2.5 | Particulate matter, particles with a diameter of size 2.5 micrometers or less. |
| VOC | Volatile organic compounds, gases found in both outdoor and indoor air. |
Indicators
 |
Particulate matter indicator |
 |
Gases (tVOC) indicator |
Air quality levelThe air quality indicator bar for particles will show the highest pollution level out of PM1, PM2.5, and PM10.
See the Blueair app for further information regarding air quality.
Air quality data 40-models and 70-modelsThe 40-models have an additional display that shows measured values for PM1, PM2.5 andPM10. Press the left or right arrow to switch between the different particulate matter sizes.
The 70-models have a dynamic screen control that shows additional values and statuses for different categories and have additional indications to show active functions. Press the left or right arrow to switch between the different categories.
Particle data indicatorThe air quality data for particles are indicated on the screen. Press the left or right arrow to switch to the Particle data category page. The screen shows measured values for PM1, PM2.5, and PM10, with its related air quality information indicated in the status bar.
 |
Category PM1 Value of 5 μg/m 3. Status Excellent air quality. |
 |
Category PM2.5 Value of 15 μg/m 3. Status Good air quality. |
 |
Category PM10 Value of 55 μg/m 3. Status Moderate air quality. |
 |
Loading data /No data available. |
See the Blueair app for more information.Temperature indicatorThe room temperature is indicated on the screen. Press the left or right arrow to switch to the Temperature category page.
Category TemperatureValue of 17 degrees Celsius/63 degrees Fahrenheit in the room.Relative humidity indicatorThe relative humidity of the room is indicated on the screen. Press the left or right arrow to switch to the Relative humidity category page.
Category Relative humidity Value of 36% in the room.Gas data indicatorThe air quality data for gases (tVOC) is indicated on the screen. Press the left or right arrow to switch to the Gas data category page. The screen shows the different sensor readings of gases over time.
Category Gas dataValue of air quality levels for gases (tVOC) in the room over time. Status Excellent air quality.Filter lifetime indicatorThe remaining lifetime of the filter is indicated on the screen. Press the left or right arrow to switch to the Filter lifetime category page. The air purifier will count down from 100% with a new filter and indicate when it is time to change the filter.
 |
Category Filter lifetime Value of 90% left of the filter. Status bar counting down. |  |
Category Filter lifetime Value of 9% left of thefilter. Status bar counting down. |
Filters
The air purifier is delivered with two pre-filters and one SmartFilter installed. The filters purify the air from both particles and gases. For best performance, clean the pre-filters regularly and change the main filter when the air purifier indicates filter change. To find the correct main filter for your air purifier, use the Blueair app or visit www.blueair.com. The model number of your air purifier can be found on the rating label on the air purifier.
Blueair filter subscription programUse the Blueair app or visit www.blueair.com to sign up for the Blueair filter subscription program. (Not available in all markets)Important! Always turn off and disconnect the appliance from the power supply before changing filters, cleaning, or carrying out maintenance procedures.
Clean the pre-filtersFor best performance, clean the pre-filters regularly.
Step 1Push the left or right side frame indent of the air purifier to release the pre-filter. 
Step 2Pull out the pre-filter from the slot.
Step 3Clean the pre-filter, by wiping with a dust cloth or vacuuming with a soft brush attachment. 
Step 4Place the pre-filter back into the slot.
Step 5Push the pre-filter to lock it in position.
Change the main filterThe air purifier calculates the remaining lifetime of the filter based on usage and sensor readings and indicates when it is time to change the filter. The recommended time for filter change is between 6-12 months depending on the indoor conditions. A filter replacement indicator appears on the control panel when it is time to change the filter.
|
Filter replacement indicator(10-models and 40-models) |  |
Filter replacement indicator(70-models) |
Important! Use only original Blueair filters suitable for the model to ensure proper function and performance of the air purifier, and to qualify for full warranty coverage.
Step 1Open the filter door.Note! The air purifier will turn off when the filter door is opened.
Step 2Remove the old main filter by pulling gently on to the two tabs.Close the main filter to seal the pollutants inside.
Step 3Note! Remember to remove the protective plastic from the new main filter before use. Insert the new main filter.
Step 4Close the filter door.Note! The filter door needs to be closed for the air purifier to start again.
Move the air purifierThe air purifier has feet and wheels to enable moving.
Important!
- Unplug the air purifier before moving it.
- Make sure that the filter door on the air purifier is securely closed.
- Move the air purifier by holding onto the handle at the top of the air purifier with two hands.
- Move the air purifier by tilting it backward and rolling it on its wheels.
Cable winderThe air purifier has a manual cable winder to store away any excess cable length. The cable winder is at the bottom of the air purifier. Store any excess cable by wrapping it around the cable winder.
Care and maintenance
General
- Disconnect the air purifier from the power supply before maintenance.
- Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric shock or damage the air purifier.
- Never clean with gasoline, chemical solvents, or corrosive materials as these agents may damage the air purifier.
- Make sure the air purifier is completely dry before connecting it to power.
- Do not wash the main filter. The main filter is not washable or reusable.
Cleaning
- Clean the pre-filters by wiping them with a dust cloth or vacuuming with a soft brush attachment.
- Wipe the exterior of the air purifier with a soft, clean, damp cloth.
- Open the door, clean the inside of the door with a soft, clean cloth.
- Vacuum the small air inlets with a soft brush attachment.
- Vacuum the inside of the air purifier with a soft brush attachment.
- Clean and check the power cable and power plug for wear or damages.
- Clean the sensor when changing the main filter.
Air quality sensorThe inlet for the air quality sensor is located on the side of the air purifier. Vacuum the inlet with a soft brush attachment.
Troubleshooting
| Trouble | Possible cause |
Action |
| The air purifier does not work. | The power cable is not connected to the power supply. | Connect the power cable to the power supply. |
| The filter door is not closed on the air purifier. | Gently close the filter door completely. | |
| The connection is not working. | The Wi-Fi does not meet the requirements of the device. | Contact Blueair customer service. |
| The Blueair app does not have an updated version or have a temporary bug. | Check for updates. | |
| The Blueair app has a user account
issues. |
Contact Blueair customer service. | |
| The air purifier is indicating that no
data is available. |
The sensor values are updating. | Wait 30 seconds for the update. |
| Disconnect the power cable from the wall outlet and wait approximately five seconds before reconnecting the power cable. | ||
| The filter indicator is blinking on the control panel and/or the air purifier has reduced airflow speed /or a filter arning is indicated on the screen. | The main filter, or an original Blueair filter, is not detected. | Insert the main filter and/or check it is inserted properly in the air purifier. |
| Change to an original Blueair filter. | ||
| The buttons on the control panel are blinking when pressed or the display indicates Child lock (not on all models). | The Child lock function is activated. | Turn off Child lock in the Blueair app. |
| The air purifier has lost Wi-Fi connection and the Child lock is act ivated in the app. | Disconnect the power cable from the wall outlet and wait approximately five seconds before reconnecting the power cable. |
For further support, please visit www.blueair.com/customer-support
Disposal and recycling
This air purifier should be disposed of or recycled as electrical waste and the filter may be recycled as plastic. If you have questions regarding the disposal and recycling of this air purifier, please contact your local recycling facility for availability or Blueair dealer and ask for the correct method of recycling.
The crossed-out waste bin symbol on the appliance or on its packaging means that at the end of its useful lifespan, the product must be disposed of separately from ordinary household wastes.
Help and supportIf you have questions about your product, please visit www.blueair.com or contact your localBlueair retailer.To contact Blueair for personalized support, please visit www.blueair.com/customer-supportWarranty informationThe Blueair Limited Warranty applies only if the air purifier is installed, used, and maintained according to the instructions in this manual.For warranty, conditions visit www.blueair.com/warrantyWarranty and returnsIf you purchased the air purifier at one of our authorized retailers, please contact the same store to request assistance.
Specifications
| 7400-series | 7700-series | |
| Input voltage, Frequency | 100-127VAC/220-240VAC, 50/60Hz | 100-127VAC/220-240VAC, 50/60Hz |
| Power consumption’ | 43W | 72W |
| Operating frequency | 2402-2480 MHz, 13.56 MHz | 2402-2480 MHz, 13.56 MHz |
| Output power | Max 5mW | Max 5mW |
| Sound level (min-max)2 | 25dB(A)-45dB(A) | 27dB(A)-55dB(A) |
| Recommended room size, | 38 m2 | 62 m2 |
| CADR Smoke’ | 455 m3/h | 735 m3/h |
| CADR Dust’ | 465 m3/h | >675 m3/h |
| CADR Pollen’ | 475 m3/h | 735 m3/h |
- According to IEC 60335-1:2010
- Sound pressure according to GB4214.1-2017
- According to ANSI/AHAM AC-1-2019
| www.blueair.comBlueair ABKarlavägen 108115 26 StockholmSwedenTel: +46 8 679 45 00[email protected] | Blueair Asia Ltd.Unit 8C, 8/F, MG Tower,133 Hoi Bun Road,Kwun Tong, Kowloon,Hong KongTel: +852 2345 8988[email protected] |
| Blueair Inc.125 S ClarkSuite 2000Chicago, IL. 60603USATel: +1 888 258 3247[email protected] | Blueair AB Middle EastJafza One, Office No. AB1503Jebel Ali Free ZoneP.O. Box No. 263947Dubai, United Arab EmiratesTel:+971 (4) 8821244[email protected] |
| Blueair (Shanghai) Trading Co. Ltd.Room 1001, City GatewayNo. 398 North Caoxi RoadXuhui District, Shanghai, ChinaTel: 400 006 9693[email protected] |
report this ad
References
[xyz-ips snippet=”download-snippet”]