BLUETTI EB180/ EB120/ EB150/ EB240 Portable Power Station User Manual

BLUETTI EB180/ EB120/ EB150/ EB240 Portable
Power Station User Manual

Portable Power StationUser ManualModel: EB120 EB150 EB180 EB240

Please read this manual before use and follow its guidance. Keep this manual for future reference.

Product Overview

A. Master power buttonB. DC power buttonC. AC power buttonD. LED indicator lampsE. 5V-USB output portsF. Type-C PD output portG. Display screenH. AC charger/PV input portI. 12V cigarette lighter socketJ. AC100-120V outlet US standard socket

LCD Display

  1. Charging power
  2. DC ON/OFF status
  3. DC output power
  4. AC ON/OFF status
  5. AC output power
  6. Battery status indicator

Note:

  1. If the product malfunctions, error codes would be displayed on screen.
  2. When product is powered on, but not in use, the product would turn off by itself after 60seconds of inactivity.
  3. When the product is powered on and the AC/DC output is turned on, the backlight would turn off by itself after a period of inactivity. To turn on the backlight again, press any button.

Safety warning

  1. Please read all the safety warnings before use and keep the manual. Warranty does not cover damage caused by failure to follow instructions.
  2. Please note the warning labels and operate accordingly.
  3. Avoid exposing the product to rain or using the product in humid environment.
  4. Do not install the product near heat sources, such as electric furnace and heaters.
  5. Place and store the product in a well-ventilated place.
  6. Wipe the product clean with a dry cloth.
  7. In case of fire, use dry powder fire extinguishers for this product.do not use water fire extinguisher, which may cause electric shock.
  8. Please do not alter or disassemble this product.
  9. If the generator needs maintenance, please contact the local designated system installation and maintenance personnel or contact seller

Storage and maintenance

  1. operating and storage environment may influence product life and the reliability of performance. Thus, remember to:
    1. place the product in a dry and well- ventilated area with mild temperature (suitable temperature:0℃ -40℃ , suitable relative humidity 10% ~ 90% )
    2. place the product in a safe area where it would not be hit or shaken.
    3. Keep the product away from corrosive and combustible material.
  2. The product would turn off itself when the battery voltage is too low, if this happens, you need to charge the battery within 2-3months.
  3. If you are not going to use it for a long time, please charge it fully before storage and then charge it at least once every month, store the product in a dry environment.
  4. Please fully charge the product before storage and charge it at least once every 3 months.

Off-grid power storage system

Unboxing

Before opening the parcel, please check whether if the parcel is damaged or not. If the product is damaged during delivery or if any items went missing upon arrival, please contact Seller customer service([email protected]) to get it solved. You should receive the following items:

Operation guidance

Attention:

  1. The operating environment should meet our requirement.
  2. Make sure that the air inlet/outlet is not blocked.
  3. Please power off the product if you are not going to use it.
  4. Please fully charge the product if you are going to idle for a long period.

How to use the product

Turn on/off the product

  1. Turn on the product: press and hold the master power button about 2 seconds to turn on the product. The LED indicator light and the display screen will light up.
  2. Turn off the product: press and hold the master power button about 2 seconds to turn off the product. The display screen and the LED indicator light would turn off.

AC/DC output

Note: check to make sure the product is turned on. Otherwise, you can not turn on AC/DC output.

  1. Turn on AC/DC output: press and hold the AC/DC power button to turn on the product. The corresponding LED indicator light would light up and the display screen would show “AC ON/DC ON”.
  2. Turn off AC/DC output: press and hold the AC/DC power button to turn off the product. The LED indicator light would turn off and the display screen would show “AC OFF/DC OFF”.

PV charge activation

Turn off generator, connect PV( or charger)to charge, activate PV charge function ,the first column on screen will be lit up and show input power, at this time, the generator is in charging state, can not support AC and DC functions. If want to open AC and DC functions, need to press master power button more than 1 second to turn on the generator, screen will be all lit up after generator be turned on. After start-up, connect PV(or charger) to start charging, screen shows input power wattage, at this time, can open AC and DC functions.

Notice:

  1. If Master Power Button is not turned on, AC button and DC button are in off status, no AC output and DC output.
  2. If Master Power Button is turned on, AC button and DC button are still in off status, no AC output and DC output. Need to turn on AC power button and DC power button separately.

How to charge the product

Charge with solar powerTo charge the product, insert the solar charging cable or AC adapter into the input port of the product. The display screen would light up and the charging power would be displayed. But don’t care this the wrong way. The product will not turn on by itself when being charged. If the product is previously turned off, it will remain turned off unless you manually turn it on.

Charge with AC powerInsert one end of the adapter into wall outlet and insert the other end to the input port of the product. Then, the product will be charged and you can monitor the battery status by checking the battery icon on the LCD screen The product comes with a built-in advanced control circuit. When the battery is fully charged, it will stop charging itself automatically.

Cold Weather

Cold weather can influence battery capacity. In sub-zero temperature (<0°C), you may be able to discharge the product, but you should not charge it. Otherwise, the battery of the product would be greatly damaged and the capacity may not even be recovered. Low temperature charging protection: When the product is charged at a temperature below 0°C, it will shut off and stop charging itself automatically. The product will reboot and start charging itself when the temperature rise to above 10°C. Low temperature discharging protection: If the product is discharged at a temperature of -20°C, it will turn off. The product will reboot and turn on output when the temperature rise to above -10°C.

FAQ

Q1: How to check charging status?The battery icon indicates the battery level of this product. The battery level is displayed in 5 segments. When battery is being charged, the icon would flash. When the battery is fully charged, the icon would stop flashing and all 5 segments will be filled.

Q2: Can this product be used to charge my electronic devices?You need to check the power at each output port. For example, the power at AC output port is provided by the built-in inverter of the product, whose maximum continuous output power is 1000W. This means that it is only suitable for electronic device whose required power is no more than 1000W.

Intelligent Cooling Control

Cooling fan will start working automatically when the following conditions are met :

  1. The load of inverter exceeds 400w.
  2. The load of 12V cigarette lighter socket exceeds 80w.
  3. The charging power of attached appliances exceeds 100W.

Besides, generator intelligent system will adjust the PV input or AC output power based on the outer case temperature, to keep the outer case at a touchable temperature.

Note: Do not use the machine when the cooling tan is broken.

Frequency Setting

When the product is powered on, turn on DC output and keep the AC output turned off. Press and hold both DC button & AC button to enter setting mode Press AC power button to choose inverter AC output frequency. Press and hold both DC and AC power button to exit frequency setting mode Restart the machine.

Trouble shooting and technical specification

ATTENTION!

If you cannot find the solution for your problem in the chart above, please provide the following information to our customer service team:

  1. About the product
    1. Serial number
    2. Model
    3. Displayed information on the screen
    4. Description of your problem
    5. Does it happen before?
    6. In what circumstance does the problem occur?
  2. About the solar panel (not included)
    1. Manufacturer and model of the solar panel
    2. Output voltage of the solar panel
    3. Output power of the solar panel
    4. MPPT output voltage of the solar panel
    5. MPPT output current of the solar panel
    6. The number of solar panels and how do you connect the panels

Specifications

Warranty

Our company provides customers with warranty of 12 months from the date of purchase.

Contact us

For any inquiries or comments concerning our products, please contact seller([email protected]) and we will respond as soon as possible.

BLUETTI EB180/ EB120/ EB150/ EB240 Portable Power Station User Manual – BLUETTI EB180/ EB120/ EB150/ EB240 Portable Power Station User Manual –

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , , ,