BluMill SL-9831 Stand Mixer Instruction Manual

Stand mixer

Read all instructions before using this product.

1 Swivel arm 7 Lid
2 Release button 8 Bowl
3 Speed control knob 9 Wisk
4 Body 10 Kneading hook
5 Footpad 11 Splashguard
6 Spindle 12 Flat beater

Important safety precautions:

When using electrical appliances, basic precautions should always be followed including the following:

  • Read all instructions.
  • To protect against risk of electrical shock do not put the appliance unit cord or plug in water or other liquid.
  • Close supervision is necessary when an appliance is used by or near children.
  • Unplug the appliance when not in use, change accessories and before cleaning.
  • Avoid contacting moving parts.
  • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
  • The use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock or injury.
  • Do not use outdoors.
  • Do let cord to hang over edge of table or counter.
  • Keep hands and utensils away from moving blades or discs while processing food to reduce risk of severe injury to person or damage to the food mixer.
  • Blades are sharp, handle carefully.
  • To reduce the risk of injury, never place cutting blades or discs on base.
  • Be certain is securely locked in place before operating the appliance.
  • Do not attempt to defeat the lid interlock mechanism.
  • Turn off the machine before replace attachment.
  • Use the product and assembly the accessory as mentioned on user manual only.
  • Switch off the appliance before changing accessories or approaching parts which move in use.
  • This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely.
  • Children should be supervised to ensure that they do not play with the appliance.
  • This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
  • Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.
  • Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

Save these instructions

Control panel

0  Stop
Setting 1-6 Operating speed
Setting 1 Minimum
Setting 6 Maximum

Setting speed

Accessories Picture Speed setting Time Capacity
Kneading Hook 1, 2, 4 30 seconds at speed 1,30 seconds at speed 2,4min at speed 4 700 g fl our and350ml water(Temperature40+/-5 °C)
Flat beater 5-Jan 10 min
Whisk 6 10 min

Operating positions

Warning!Operate the appliance only when the accessory/tool is attached according to this table and is in the operating position.

Item Position Accessory
1
2 Set up Kneading Hook, Flat beater, Wisk, according to your desire.

Risk of injury from the rotating tools!While the appliance is operating, keep fi ngers clear of the mixing bowl.Do not change tools until the appliance is at a standstill and have been unplugged.When switch off, the drive continues running briefly.

How to use Kneading hook, Flat beater, Whisk

Place the appliance on a fl at surface, e.g. a kitchen counter, and make sure it is standing firmly.Press the arm release button (2) at the same time lift the swivel arm (1) with hand so that it locks into place with a click℃ The swivel arm tilts up.

Fit the lid (7) onto the swivel arm and turn it slightly clockwise, so that it locks into position securely.

1. Place the food in the mixing bowl (8).2. Fit the mixing bowl in the recess on the motor house (4).3. Turn the mixing bowl slightly clockwise, so it locks into position.

  1. Put the splashguard (11) onto the kneading hook (10) as shown in the picture. Turn and fi x the hook. The splashguard can prevent the dough from climbing to the top of the hook.
  2. Fit the required accessory (11 with 10 or 12) onto the motor spindle (6) on the underside of the swivel arm.
  3. A. The kneading hook (10) is used for heavy dough, minced meat or other demanding kneading jobs. B. The fl at beater (12) is used to mix lighter types of dough. C. The whisk (9) is used for whisking cream, egg whites, etc.
  4. Turn the accessory, so the pins on the spindle are aligned with the depressions on the accessory top edge. Press the accessory against the swivel arm and turn it anti-clockwise at the same time until the pins engage and the accessory locks into position securely. The accessory must not be loose nor should you be able to pull it free.

  1. Press the arm release button at the same time lowers the swivel arm so that it locks into place with a click. The lid must fit tightly with the mixing bowl, otherwise, it is fitted incorrectly. The appliance is now ready for use.
  2. Plug the power cord into main power outlet.
  3. Select the speed you want using (1-6). Speed 1 is the slowest and speed 6 is the fastest speed. Recommended speeds, time and capacity are shown in the table above.
  4. If you need to scrape inside the mixing bowl, wait until the accessory has stopped completely. Use the spatula, never your fingers.

  1.  Switch off the appliance by turn the speed control knob to 0 when you have fi nished mixing. Switch off the appliance and unplug it before you change the accessories, or before you take the Press the arm release button at the same time lift the swivel arm with hand so that it locks into place with a click. The swivel arm tilts up.

  1.  Detach the accessory by turning it clockwise.
  2. Remove mixing bowl with prepared food anti-clockwise.

Important!The temperature of water which will be added into dough at 40+/-5 ℃degree when preparing for dough is on progress.Capability of bowl5000 mL

Cleaning

When cleaning the appliance, you should pay attention to the following points:

  • Remove plug from the mains socket, and allow the appliance to cool down before cleaning it.
  • Do not immerse the motor section of the appliance in water and make sure no water enters the appliance.
  • Clean the motor section by wiping it with a damp cloth. A little detergent can be added if the appliance is heavily soiled.
  • Do not use scouring pads, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as they may damage the outside surfaces of the appliance.
  • Take the appliance apart and clean all of the accessories separately. The meat grinder body and other parts can be cleaned in warm soapy water or in the dishwasher. Make sure the parts are not fixed firmly in the dishwasher as this may change their shape.
  • Be careful not to touch the blades or sharp parts during use and cleaning.
  • IMPORTANT! Allow to dry fully after cleaning before using again. Do not use the appliance if damp.
  • After washing and drying, immediately place attachment into the protective sleeve for storage.

Correct Disposal of this productThis marking indicates that this product should not be disposed with other householdwastes throughout the EU. To prevent possible harm to the environment or humanhealth from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. Thecan take this product for environmental safe recycling.

report this ad

Stand mixerSL-9831AC 220~240V 50~60Hz 1200W

Distributed by: OCG RetailEemnesserweg 11-101251 NA Larenthe Netherlands[email protected]

[xyz-ips snippet=”download-snippet”]


Posted

in

by