boAt Airdopes 131 Twin Wireless Earbuds User Guide

boAt Airdopes 131 Twin Wireless Earbuds User Guide

Twin wireless Ear-buds

Get ready to get yourself soaked in musical bliss with your very own pair of boAt Airdopes 131. Please consider this manual as your guiding map towards the shores of musical bliss. Knowledge ofBluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual; you may also refer to the same at times when youface any sort of dicotyl in future.

In the box

1. 1x pair of Ear-Buds
2. 1x Charging Case
3. 2x Pairs of Additional Earmuffs
4. 1x User Manual
5. 1x Charging Cable

Product Overview

1. MFB (Multi Function Button) / Power Button
2. Indicator Lights
3. Charging Port

Power On (First Time User)

Step 1: To automatically switch the earbuds on (Smart PowerOn) simply open the lid of the charging case. When you open the lid of the case, our IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enterinto the connection modeORTo manually switch the earbuds on (Manual Power On), long press the Multifunction Button (*MFB) on both earbuds for 3 seconds until the LED starts to fash in blueStep 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection ModeStep 3: Turn on the Bluetooth functionality on your phone/media device and scanStep 4: Search for ‘Airdopes 131’ and pair accordingly. Enter ‘0000’ as the passkey if asked.Congratulations! Your earbuds are now connected successfully via Bluetooth.

Power On (Subsequent Usage)

IWP Technology: The next time you when you open the lid of the case, our IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, and get connected to the previously connected device.

Notes:

• Pairing mode lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above mentioned procedure
• Airdopes 131 remembers previously connected devices; once switched on, the ear-buds automatically reconnect to the previously connected device.

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use either of the two options; Smart Power On or Manual Power On for switching on the desired earbudStep 2: The selected earbud will automatically enter the connection mode.Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 131’ to connect

Notes:

• To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.
• You cannot skip tracks or return to the previous tracks in Mono mode.

LED Indicators / Functionalities

Charging The Case

Step 1: To charge the case, plug one end of the charging cable into the case and the other end into a USB port/adapterStep 2: Flashing white LEDs indicate that the charging case is being charged. Once the charging case gets fully charged, the LEDs turn into solid white

Note – The LED lights located on the charging case indicate the battery status of the case.

Charging The Earbuds

Step 1: Please insert the earbuds back inside the charging case in correct orientation.Step 2: A solid white LED will indicate that the earbuds are being charged. Once fully charged the LED turns offStep 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.

Note:

• Before using the ear-buds for the first time, it is recommended to fully charge the ear-buds. Also, please keep the lid of the charging case closed while charging and use a 5V/2A adaptor

Voice Assistant

 

Step 1: Long press the MFB on either earbud for 2 seconds to activate the voice assistantStep 2: The respective voice assistant screen pops up and you may place your commands at easeTips: You may try the following commands,

Smart Power Off

Step 1: After usage, remove both the earbuds from your earsStep 2: Place the earbuds back inside the charging case in correct orientation and close the case lidStep 3: The earbuds will automatically switch off (and enter into charging mode.)

Manual Power Off

Step 1: Long press the MFB on either earbud for 5 seconds in order to manually switch off the earbuds. Please note that this powers off both the earbudsStep 2: Please keep the earbuds back into the charging case to charge the earbuds

Basic Functions

• Voice Assistant: Long press the MFB on either earbud for 2 seconds to activate the voice assistant
• Answer/Hang Up Call: Single press the MFB on either earbud to answer an incoming call and once again to hang up an ongoing call
• Reject Call: Long press the MFB for 2 seconds to reject incoming calls.
• Play/Pause Music: Single press the MFB on either earbud to play a song or to pause one
• Next Track: When playing music, double press the right earbud’s MFB in order to skip to the next song on the playlist
• Previous Track: When playing music, double press the left earbud’s MFB in order to return to the previous song on the playlistNote: Volume cannot be controlled via earbuds and can only be adjusted via phone/media device

Factory Reset

Perform the Factory Reset in case you face any difficulty while operating your Airdopes 131Step 1: Keep both the earbuds inside the case in their correct orientationStep 2: Triple tap the MFB on both earbuds to perform the reset. Red LED blinks for 1 sec to indicate the sameStep 3: After the reset, close the lid of the carry caseStep 4: Congratulations! Your Airdopes 131 has been reset and ready to establish connection again.

If only one earbud is functioning:

Simply insert the earbuds back into the case and take them out or perform the Factory Reset.

If earbuds are not in scan mode:

Simply insert the earbuds back into the case and take them out or perform the Factory Reset.

Specifications

Bluetooth Version	V5.0
Driver Size	13mm
SNR	90dB
Music Playtime	Up to 3 Hours (Up to 12H with Case)
Talk Time	Up to 3 Hours
Standby Time	100 Hours
Transmission Range	10m
THD	<5%
Bluetooth Profile	HSP, HFP, A2DP, AVRCP
Frequency	20Hz-20000Hz
Battery Earbuds	40mAh x2
Battery Charging Case	650mAh
Charging Time	2 Hours

Troubleshooting

Warning

• Please follow the instructions to operate
• Please charge the ear-buds with input power below 5V/2A in order to protect the battery
• Please don’t use the ear-buds in extreme temperatures
• Please don’t use the product near water
• Please keep the product away from heat sources, as the heat may damage it
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life.
• Never disassemble or modify the device to avoid any permanent damage or danger
• Do not use the device during a thunderstorm to avoid irregular function or risk of electric shock
• Don’t use harsh chemicals to clean the device

 

Read More About This Manual & Download PDF: