boAt Rockerz 235 V2 Wireless Bluetooth Headsets User Guide

Thank you for choosing the boAt Rockerz 235V2. This manual is meant to guide you through to the shores of Nirvana without much difficulty. Please think of this manual as your map. Knowledge of Bluetooth and device connection is essential for steering this boAt. Therefore, we strongly advise that this manual is thoroughly read before use, and referred to in times of difficulty.

Package contents

• 1 x boAt Rockerz 235V2
• 1 x Micro USB charging cable
• 2 x Additional Earmuffs (S & L)
• 1 x Manual
• 1 x Warranty Card

Product Diagram:

Power On: Press and hold the Multifunction button (MFB) for 3 seconds. The blue LED light blinks to indicate the same.Power Off: Press and hold the MFB button for 3 seconds. The red LED light blinks to indicate the same.

Bluetooth Connectivity

1. Turn on Bluetooth in your phone and long-press the MFB on Rockerz 235V2 for 6 seconds until the red and blue LEDs blink to indicate the connection mode
2. Then, click on ‘Rockerz 235V2’from the list of available devices after search
3. If asked for a passkey, confirm the passkey’0000’on phone 4. Once confirmed, the headset and phone get connected via Bluetooth indicated by flashing blue LED once every few seconds

Note: If there’s a connection history between the phone and the headset then they automatically get reconnected in a working range.

Charging

• Connect the charger to the charging port on the headset
• While charging the indicator light will turn red
• When the headset is fully charged, the indicator LED turns into blue
• This wireless headset supports Fast Charging technology
• Use only authorized/company chargers for the headset, as unauthorized ones may damage the same and invalidate the warranty on the headset as well.

Basic Functions

Play: Short press the MFB once to playPause: Short press the MFB once to pauseVolume Up: Press’+’ button in steps to increase the volumeVolume Down: Press the’-‘ button in steps to decrease volumeNext Track: Press and hold ‘+’ button for skipping to next trackPrevious Track: Press and hold the’-‘ button for returning to the previous trackAnswer Incoming Calls: Single press the MFB to attend an incoming callHang Up Ongoing Calls: Single press the MFB to end an ongoing callReject Calls: Double press the MFB to reject incoming cal IsCharging: Connect the charger to the charging port, the indicator will turn red while charging. Once fully charged, the LED turns into blueRedial: Double press the MFB to redial the last called numberVoice Assistant: Long press the MFB for 1.5 seconds to activate the voice assistant

VIBRATION ALERT: This headset supports vibration alerts. Whenever you’re receiving a call from someone, this headset will vibrate to notify you.FAST CHARGE TECHNOLOGY: This headset supports fast charging. 20 minutes of charge will give you up to 4 hours of playback time .1 hour of charge will fully charge your headset.

Specifications

Safety Cautions:

• Please don’t dismantle the product in any way or remove the product’s battery by yourself, as this can lead to a fire or electrical breakdown. Any maintenance or servicing of the earphones should be done only through a qualified service provider/manufacturer.
• Please clean the earphones with the utmost of care with only a damp soft cloth, if cleaning is required. Please do not use any oily volatile liquid. In addition, ensure that the earphones are kept away from extremely hot or cold substances.
• Any damage to the earphones that is NOT a manufacturing issue will make the product’s warranty null and void.
• Do not use earphones when it is unsafe to be wearing them, such as while operating a vehicle, crossing a street, or during any activity where full awareness of your surroundings is required.
• To avoid damage to your hearing, make sure that the volume on your music player is at an appropriate level when you are Plugging into Nirvana. Exposure to any noise levels at or above 85 dB can gradually lead to a loss of hearing.

Charging norms & Precautionary Guidelines: –

1. Charger/Brick/Adapter : 5V 2A 2)
2. Cable/Wire: Standard Cable (35 strands @0.10mm diameter/strand)

Any other accessory can be paired up with the product as long as the specifications are as per the above norms.

report this ad