Fontus 18V
Safety Notes
WARNING! Read all safety warnings and all instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.Explanation of symbols on the machine
General hazard safety alert. Read the instruction manual.
Never direct the water jet against the face of people and animals, the machine itself, or electric components.
Operation
- The operator must use the product in accordance with the regulations. The local conditions must be taken into account. When working, pay attention to other people, especially to children.
- Never allow children, persons with physical, sensory or mental limitations or a lack of experience and/or knowledge and/or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator.
- Children should be supervised to ensure that they do not play with the product.
- The operator is responsible for third parties in the work area. Make sure that the water jet does not point in a direction where it can cause damage.
Application
- All current-conducting components in the work area must be protected against splashed water.
- Materials containing asbestos and other materials which contain substances that are hazardous to your health must not be sprayed.
- Operate the machine only when the battery compartment is shut. This protects the battery against splashed water.
- Before use, check that the machine and operating equipment are in perfect condition and are safe to operate. Do not use if it is not in perfect condition.
- The machine must be placed on a stable surface.
- Do not use solvent-containing liquids, undiluted acids, acetone or solvents, including petrol, paint thinners, heating oil. The sprayed vapors are highly flammable, explosive, and toxic.
- Never fill the water tank with the filter removed or if the filter is damaged.
- Do not modify the machine. Unauthorized modifications can impair the safety of your machine, lead to increased noise and vibrations, and poor performance.
- Do not direct the spray jet against the faces of persons or animals.
- Never immerse the machine into the water to fill the tank.
- High pressure may cause objects to rebound. If necessary wear suitable personnel protective equipment such as safety goggles.
- Use only fresh (not saline) water to fill the water tank.
Recommendations for OptimalHandling of the Battery Pack
- Do not open the battery. There is a risk of short-circuiting.
Protect the battery against heat (e.g., against continuous intense sunlight), fire, water, and moisture. There is a risk of explosion. - In case of damage and improper use of the battery pack, vapors may be emitted. Ventilate the area and seek medical help in case of complaints. The vapors can irritate the respiratory system.
- Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.
- Do not short-circuit the battery. There is a risk of explosion.
- Occasionally clean the venting slots of the battery using a soft, clean, and dry brush.
- Charge the machine only with the supplied battery charger.
Protect the battery against heat (e.g., against continuous intense sunlight), fire, water, and moisture. There is a risk of explosion.Safety Warnings for Battery Chargers
Read all safety warnings and all instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire, and/or serious injury.Save all safety warnings and instructions for future reference. Use the battery charger only when you fully understand and can perform all functions without limitation, or have received appropriate instructions.
- Never allow children, persons with physical, sensory or mental limitations or a lack of experience and/or knowledge and/or people unfamiliar with these instructions to use the battery charger. Local regulations may restrict the age of the operator.
- Supervise children at all times.
- This will ensure that children do not play with the battery charger.Charge only Bosch lithium-ion batteries with a capacity above 1.5 Ah (3 battery cells or more). The battery voltage must match the battery charging voltage of the charger.
- Do not charge non-rechargeable batteries.Otherwise, there is a danger of fire and explosion. Keep the battery charger away from rain or moisture. Penetration of water in the battery charger increases the risk of an electric shock.
- Keep the charger clean. Dirt poses a risk of electric shock.
- Always check the charger, cable, and plug before use. Stop using the charger if you discover any damage. Do not open the charger yourself, and have it repaired only by a qualified specialist using only original replacement parts. Damaged chargers, cables and plugs increase the risk of electric shock.
- Do not operate the charger on an easily ignited surface (e.g. paper, textiles, etc.) or in a flammable environment.
- There is a risk of fire due to the charger heating up during operation. Do not cover the ventilation slots of the battery charger. Otherwise, the battery charger can overheat and no longer operate properly.
- For increased electrical safety, we recommend using a residual current device with a max. tripping current of 30 mA. Before using, always check your residual current device.
Transport and Storage
- Switch the machine off and ensure that the extendable handle is locked before transporting. Care should be taken when lifting and moving the machine, particularly when the water tank is full. Check if the extendable handle is securely locked. Use the extendable handle and the lower front handle to lift the machine. Ensure a healthy back posture when lifting the machine. Keep your back straight and bend the knees.
- Use caution when moving the machine over slopes or steps. The machine is heavy when filled with water.
- Before storing, drain the water from the tank and the pump system.
Maintenance
u Switch off the unit prior to all cleaning and maintenance work and before replacing components. Pull out the mains plug if the unit is mains operated.u Repairs may only be carried out by authorized Bosch Service Centres.
Accessories and spare parts
- Accessories and spare parts which have been approved by Bosch must be used. Original accessories and spare parts guarantee that the machine can be operated safely and without any breakdowns.
SymbolsThe following symbols are important for reading and understanding the original instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the product in a better and safer manner.
| Symbol | Meaning |
 |
Movement direction |
 |
Reaction direction |
|
Switching on |
 |
Switching off |
|
Accessories/Spare Parts |
Intended Use
The machine is intended for domestic use, either fed from the internal tank or the mains water connection, to clean vehicles, tools, windows, boots, bicycles, dogs (in low-pressure mode), outdoor toys, greenhouses, garden furniture, etc.The pressure mode and spray pattern should be correctly adjusted for the respective cleaning task.
Product features (see figures A and D)
The numbering of the product features refers to the illustration of the product on the graphics pages.
| (1) Nozzle head(2) Trigger(3) Hose connector for spray gun(4) Hose(5) Brush(6) Battery charge-control indicator(7) Storage compartment(8) Front handle(9) Water outlet(10) Connector for the mains water feed and filter element (under the cap)(11) Filler cap | (12) Pressure selector(13) On/Off switch(14) Battery compartment cover(15) Battery compartment release button(16) Extendable handle lock(17) Extendable handle(18) Spray gun(19) Battery a)(20) Battery unlocking button(21) Charger a)(22) Detergent nozzle a) |
a) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.
Technical Data
| Cordless pressure cleaner | Fontus 18V | |
| Article number | 3 600 HB6 1.. | |
| Rated voltage | V | 18 |
| Rated power | W | 170 |
| Protection class | III, IP X4 | |
| Max. pressure (system) | MPa | 4.0 (+/- 0.4) |
| Cordless pressure cleaner | Fontus 18V | |
| Rated pressure (user output) | MPa | 2.0 (+/- 0.2) |
| Max. water temperature | t | 50 |
| Weight according to EPTA-Procedure 01:201e) | kg | 8. |
| Serial number | See serial number (nameplate) on machine | |
| Permitted ambient temperature | ||
| – during charging | °C | 0 … +45 |
| – during operation B) | °C | +5 … +50 |
| – during storage | °C | -20 … +50 |
| Battery type | PBA 18V…W-.1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0 Ah, 5.0Ah, 6.0 Ah |
A) Depends on battery in useB) Limited performance at temperatures <0 °C
| Charger | AL 1810 CV | AL 1820 CV | AL 1830 CV | |
| Charging current | A | 1,0 | 2,0 | 3,0 |
| Charging period (battery dis- charged) | (80 %)/100 % | (80 %)/100 % | (80 %)/100 % | |
| – Battery with 1.5 Ah | min | (72)/94 | (36)/49 | (24)/33 |
| – Battery with 2.0 Ah | min | (96)/124 | (48)/64 | (32)/45 |
| – Battery with 2.5 Ah | min | (120)/154 | (60)/79 | (40)/60 |
| – Battery with 3.0 Ah | min | (144)/184 | (72)/94 | (48)/72 |
| – Battery with 4.0 Ah | min | (192)/244 | (96)/124 | (64)/95 |
| – Battery with 5.0 Ah | min | (240)/304 | (120)/154 | (95)/105 |
| – Battery with 6.0 Ah | min | (288)/364 | (144)/184 | (96)/130 |
| Weight according to EPTA-Procedure 01:2014 | kg | 0,17 | 0,21 | 0,40 |
| Protection class | |
|
|
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values were determined according to EN 60335-2-79.Typically the A-weighted noise levels of the product are Sound pressure level 67 dB(A); sound power level 78 dB(A). Uncertainty K = 4,0 dB.Overall vibrational values ah (vector sum of three directions) and uncertainty K determined according to EN 60335-2-79: ah = 0,4 m/s 2 , K = 0,5 m/s2
Mounting and Operation
| Representation/Action Objective | Figure | Page |
| Product Features | A | 249 |
| Delivery scope | B | 250 |
| Filling the water tank | C1 | 250 |
| Fill the water tank with mains water connection | C2 | 251 |
| Fill the water tank with mains water connection continuous)/automatic filling | C3 | 251 |
| Battery charging and inserting | D | 252 |
| Carrying and transporting | E | 252 |
| Connecting the hose | F | 253 |
| Switching on | G | 253 |
| Adjusting the pressure setting | H | 254 |
| Spray-pattern variants | I | 254 |
| Using the brush | J | 255 |
| Switching off | K | 256 |
| Disconnecting the hose | L | 256 |
| Representation/Action Objective | Figure | Page |
| Maintenance | M | 257 |
| Storage | N | 257 |
| Accessories | O | 258 |
Switching on
Charging the Batteryu Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the charger.The battery is equipped with temperature monitoring that allows charging only in the temperature range between 0 °C and 35 °C. In this manner, a high battery service life isachieved.Note: The battery is supplied partially charged. To ensure full battery capacity, completely charge the battery in the battery charger before using it for the first time.The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does not cause damage to the battery.The “Electronic Cell Protection (ECP)” protects the lithium-ion battery against deep discharging. When the battery is empty, the product is switched off by means of a protective circuit: The product no longer operates.Do not continue to press the On/Off switch after an automatic shut-off of the product.The battery could become damaged. Observe the notes for disposal of the battery.Inserting/Removing the Battery (see figures D and L)Note: Using unsuitable batteries can lead to malfunctions or damage the machine.Press the battery compartment release button (15) to open the battery compartment cover (14). Insert the charged battery (19). Ensure the battery is inserted correctly.Close the battery compartment cover and ensure that the lock of the battery compartment release button (15) has engaged. The battery compartment cover (14) protects thebattery against splashed water during operation.Press the battery compartment release button (15) to open the battery compartment cover (14). To remove the battery (19) from the machine, press the battery unlocking button (20) and pull the battery out.Meaning of the Indication Elements (AL 1810 CV)Flashing battery charge indicator The charging process is indicated by the flashing of the battery charge indicator.Solid light on the battery charge indicatorA solid light on the battery charge indicator signals that the battery is fully charged or that the temperature of the battery is not within the permitted charging temperature range, and can therefore not be charged. The battery is charged as soon as the allowable charging temperature range is reached. When the battery is not inserted, a solid light on the battery charge indicator signals that the mains plug is inserted in the plug socket and that the charger is ready for operation.
Meaning of the Indication Elements (AL 1830 CV)(Fast) Flashing of the Green Battery Charge Indicator
The rapid-charging procedure is indicated by the fast flashing of the green battery charge indicator.Note: The rapid-charging procedure is only possible when the battery temperature is within the allowable charging temperature range, see section “Technical Data”.(Slow) Flashing of the Green Battery Charge Indicator
When the charging condition of the battery is 80%, the green battery charge indicator flashes slowly.The battery can be removed for immediate use.Continuous Lighting of the Green Battery Charge IndicatorContinuous lighting of the green battery charge indicator indicates that the battery is fully charged.When the battery is not inserted, continuous lighting of the battery charge indicator indicates that the main plug is inserted in the socket outlet and that the battery charger is ready for operation.Continuous Lighting of the Red Battery ChargeIndicatorContinuous lighting of the red battery charge the indicator indicates that the temperature of the battery is not within the allowable charging temperature range, see section “Technical Data”. As soon as the allowable charging temperature range is reached, the battery charger automatically switches to rapid charging.Flashing Red Battery Charge Indicator 
A flashing red battery charge indicator indicates a different malfunction of the charging procedure, see section “Troubleshooting – Causes and Corrective Measures”.
Operation
Always use fresh water to fill the internal tank either directly or via the water connection. Check if the filter (10) is inserted and undamaged (see figures C1 and C2).
Connect the hose (4) to the water outlet (9) and the spray gun (18) (see figure F).Select the desired spray pattern by rotating the nozzle head (1) (see figure I).Select the desired jet strength with the pressure selector (12) (see figure H).Press the On/Off switch (13) and pull and hold the trigger (2) until water comes out (see figure G).Note: It can take up to 10 seconds for water to come out when the product is first used after the water tank has been emptied.Autostop Function The machine is designed to switch off the motor as soon as the spray-gun trigger (2) is released.
Auto-off FunctionThe motor switches off when the product runs continuously for 30 minutes.Auto sleep Function The machine automatically switches off after 5 minutes without operation.Mounting/dismounting the brush (see figure J) The brush (5) mounts onto the spray gun and makes cleaning more effective.Slide the brush straight onto the spray gun (18). Guide the upper and bottom clip of the brush into the corresponding openings on the spray gun.Remove the brush by pressing the bottom clip upward and pulling the brush off the spray gun.
Troubleshooting
Cordless pressure cleaner
| Problem | Possible Cause | Corrective Measure |
| Machine does not | Battery discharged | Recharge battery |
| Battery too hot/cold | Allow cooling/warm | |
| Machine frozen | Wait until the machine has defrosted | |
| Pressure pulsating | Blocked nozzle | Clean nozzle |
| Air in pump | Operate the machine in turbo-pressure mode withnozzle set to shower jet until the system is air-free | |
| Motor running but no or limited working pressure | Water tank empty | Refill water tank |
| Pump not vented | Press and hold the trigger to vent air | |
| Power indication lights up but pumps no longer running | The auto-off function has been activated | Switch the machine off and then on again |
| Machine switches off | The auto sleep function has been activated | Press On/Off switch for activation |
| Battery discharged | Recharge battery | |
| Water leaks from the machine | Leaking pump | Slight water leaks are possible; in case of excessive leaks, contact Bosch Service Centre |
| Leaking connections | Check if connections are properly mounted | |
| Filler cap untight | Check if the filler cap is properly closed | |
| Motor starts in standby mode | Pump, spray gun or hose leaking | In case of continuous malfunctions in standby mode, contact Bosch Service Centre |
| The hose cannot be removed | When the machine is still switched on, pressure in the system increases the required force to remove connectors | Switch the machine off, then pull the trigger to release the pressure |
| The tank is not being filled, although the tap water is connected | Water hose and/or hose connection is clogged or blocked | Switch the machine off, check and clean the water hose or hose connection |
Battery and charger
| Problem | Possible Cause | Corrective Measure |
| Flashing red battery charge indicator No charging procedure possible | Battery not (properly) inserted | Properly insert the battery in the charger |
| Battery contacts contaminated | Clean the battery contacts (e. g. by inserting and removing the battery several times) or replace the battery | |
| Battery defective | Replace battery | |
| Battery charge indicators do not light up | Mains plug of battery charger not plugged in (properly) | Insert mains plug (fully) into the socket-outlet |
| Socket outlet, mains cable or battery charger defective | Check the mains voltage; have the battery charger checked by an authorized after-sales service agent for Bosch power tools |
Maintenance and Service
Maintenance, Storage and Transportation (see figures K – N) Switch the machine off and press the trigger to drain the water from the hose.Disconnect hose from spray gun and water outlet. The spray gun, brush and hose can be stored with the machine.Drain water from the system and remove the battery.Clean the filter regularly.Battery Maintenance Use the following procedures to enable optimum usage of the battery:– Protect the battery against moisture and water.– Store the machine and battery only within a temperature range between –20 °C and 50 °C . As an example, do not leave the battery in the car in summer.– It is recommended that the battery is not stored within the product but stored separately.– Do not leave the battery in the product in direct sunlight.– The ideal storage condition for the battery is 5 °C.– Occasionally clean the venting slots of the battery using a soft, clean and dry brush.A significantly reduced working period after charging indicates that the battery is used and must be replaced.After-Sales Service and Application Service Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.comThe Bosch product use advice team will be happy to help you with any questions about our products and their accessories.In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.Great BritainRobert Bosch Ltd. (B.S.C.)P.O. Box 98Broadwater Park
North Orbital RoadDenham UxbridgeUB 9 5HJAt www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.Tel. Service: (0344) 7360109E-Mail: [email protected]You can find further service addresses at: www.bosch-pt.com/serviceaddresses
TransportThe contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable for road transport by the user without further restrictions. When shipping by third parties (e.g.: by air transport or forwarding agency), special requirements on packaging and labeling must be observed. For the preparation of the item being shipped, consulting an expert for hazardous material is required.Dispatch battery packs only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in thepackaging. Please also observe the possibility of more detailed national regulations.
DisposalThe product, batteries, accessories, and packaging should be sorted for environmental-friendly recycling.Do not dispose of the product and batteries/rechargeable batteries into household waste!
Only for EU countries:According to the European Guideline 2012/19/EU, products that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/ batteries must be collected separately and disposed of in an environmentally correct manner.Battery packs/batteries:Li-ion:
Please observe the notes in the section on transport (see “Transport”, page 17).UK Importer:Robert Bosch Ltd.Broadwater ParkNorth Orbital RoadUxbridge UB9 5HJ
| EU Declaration of Conformity | We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards. |
| Cordless pressure cleaner Article number |
| Fontus 18V | 3 600 HB6 1. | 2014/35/EU2014/30/EU2011/65/EU2000/14/ECEN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019EN 60335-2-54:2008+A11:2012+A1:2015EN 55014-1:2017+A11:2020EN 55014-2:2015EN IEC 63000:2018 |
2000/14/EC: Measured sound power level 78 dB(A), uncertainty K =4,0 dB, guaranteed sound power level 82 dB(A); Conformity assessment procedure in accordance with annex V. Product category: 27 Technical files at: *
* Robert Bosch Power Tools GmbH,PT/ECS, 70538 Stuttgart, GERMANY
| Henk BeckerChairman of ExecutiveManagement | Helmut HeinzelmannHead of Product Certification |
Robert Bosch Power Tools GmbH, 70538 Stuttgart, GERMANYStuttgart, 09.12.2020Bosch Power ToolsF 016 L94 184 | (10.12.2020)
report this adRobert Bosch Power Tools GmbH70538 StuttgartGERMANYwww.bosch-pt.comF 016 L94 184 (2020.12) O / 263
References
Service worldwide
Loading…
📧[email protected]
ÐлекÑÑоÑнÑÑÑÑменÑи Bosch | Bosch Professional
Bosch električni alati | Bosch električni alati
📧[email protected]
Ηλεκτρικά εργαλεία Bosch | Ηλεκτρικά εργαλεία Bosch
📧[email protected]
Invented for life | Bosch Global
Bosch-sähkötyökalut | Bosch-sähkötyökalut
📧[email protected]
Domov | Bosch v Sloveniji
Outillage électroportatif Bosch | Outillage électroportatif Bosch
My Blog
bosch-pt.ru
Početna strana | Bosch u Srbiji
📧[email protected]
Bosch el-værktøj | Bosch el-værktøj
Elektrické nářadí Bosch | Elektrické nářadí Bosch
📧[email protected]
Select your country | Bosch Power Tools
📧[email protected]
📧[email protected]
Bosch Power Tools | Bosch Power Tools
📧[email protected]
📧[email protected]
Elektrické náradie Bosch | Elektrické náradie Bosch
Bosch Elektrowerkzeuge und Zubehör | Bosch Elektrowerkzeuge
ÐлекÑÑоинÑÑÑÑменÑÑ Bosch | Bosch Professional
Електроинструменти на Bosch | Електроинструменти на Bosch
📧[email protected]
📧[email protected]
📧[email protected]
Skånevik Ølen Kraftlag AS
📧[email protected]
[xyz-ips snippet=”download-snippet”]