BOSE ShowMatch SMS118 Installation Guide
Package Contents
Dimensions & Weight
Installation Instructions
This guide includes instructions for installing the Bose ShowMatch SMS118 Speaker Pole Mount Adaptor M20 Thread for use with the Bose ShowMatch SMS118 subwoofer. To ensure safe product installation, it is the installer’s responsibility to refer to all relevant documentation for this product and all other installation components before installing the product.
Before installing the adaptor, please read this installation guide and the AMM112 product guide. To access additional Bose documentation, scan the QR code on this page or visit pro.Bose.com/sms118adaptor.
If you are using additional components or hardware in your installation, please review all relevant documentation for those products.
Note: The adaptor is not designed for permanent outdoor use.
- Remove the four M6 screws from the pole cup on the subwoofer. Save the screws.
- Remove the pole cup and its gasket.
- Insert the pole mount adaptor into the new (included) gasket.
- Insert the pole mount adaptor and gasket into the hole on the subwoofer, and align the screw holes.
- Attach the pole mount adaptor to the subwoofer using the four original M6 screws.
WARNINGS/CAUTIONS
Please read and keep all safety and use instructions.Contains small parts which may be a choking hazard. Not suitable for children under age 3.
- This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product. Please read this document and all safety warnings before attempting installation.
- Installed loudspeakers require regular inspection and routine maintenance to ensure proper function and safe operation. Inspect mounting hardware and attachments for signs of corrosion, bending or any other condition that may decrease the structural integrity. Immediately replace worn or damaged components.
- Unsafe mounting of any heavy load can result in serious injury or death, and property damage. It is the installer’s responsibility to evaluate the reliability of any mounting method used for their application.
- Use only the hardware and accessories included or specified by Bose. Hardware for securing the loudspeaker to the mounting surface is not supplied. For information on compatible accessories, see the product’s technical data sheet at PRO.BOSE.COM.
- Do not make unauthorized alterations to this product.
- Do not expose loudspeaker or mounting components to any chemical substances that are not specified by Bose, including but not limited to lubricants, cleaning agents, contact sprays, or other hydrocarbon-based solvents. Exposure to such substances can lead to degradation of the plastic material, resulting in cracking and creating a falling hazard.
- Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers or other apparatus (including amplifiers) that produce heat.
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “0” is 2010 or 2020.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. For service or importer information, call +5255 (5202) 3545.
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan. Phone Number: +886-2-2514 7676
Bose Corporation Headquarters: 1-877-230-5639
Bose and ShowMatch are trademarks of Bose Corporation. ©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Warranty InformationThis product is covered by a limited warranty. For warranty details, visit pro.Bose.com/warranty.
References
[xyz-ips snippet=”download-snippet”]