BOSS MC720B Motorcycle Speaker User Manual

Table of Contents

BOSS MC720B Motorcycle Speaker User Manual

Congratulations on your purchase of a BOSS Audio Systems amplified speaker system. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, for years of listening pleasure.Thank you for making BOSS AUDIO SYSTEMS your choice for entertainment!

Features

Aux-In (3.5mm)
Speaker Clamp Mounts
Weatherproof Volume Control
High-Impact, High Temperature Speaker Enclosures
Weatherproof Speakers
Bluetooth Audio Streaming

Operation Voltage	10-16 V
THD	<0.1%
S/N	>85 dB
Channel Separation	>50 dB
Frequency Response	50Hz – 15KHz
Sensitivity	>400mv
Speaker Wires	4.6′
Volume Control Wire	6.2′
Audio Input Cable	1.9′
Power Cable	6.2′
Clamp Size Range	0.75″ -1.25″
Fuse Rating	7.5A
Amplifier dimensions	3.6″x2.3″x1.5

Installation

Screw the clamps to the bottom of the speakers.
Find a safe, ideal mounting location and fit the clamps over the chosen mounting bars.
Fasten the mounting screws after you review the safety of the mounting location.

Wiring

Be sure to run the wiring securely and far away from anymoving components.
Connecting the power cable to the power source: You will need to connect the 12V red wire to a (fused 7.5 A) switched power source.
Use the 3.5mm stereo jack to connect to your entertainment source(MP3 player, etc).
Use your player device and wired remote volume controller to control your level of loudness.

Bluetooth

To pair and connect your Bluetooth device to the MC720B Enter Settings > Bluetooth Menu > Search > “Boss Audio MC720B” >If Prompted to enter a passcode enter : “0000”.

Connections

Note:

AUX 3.5 female input connector for output of other audio device like mobile phone, MP3, Ipod and so on.
Should use standard 3.5mm 3-pole male plug AUX cable (not included).
Stop BT connection first when using the 3.5mm AUX input as an audio source input.

Amplifier and Loudspeaker Mounting Installation Reminder

The components and wiring should not be installed around any moving parts, keep away from ignition parts, fuel lines, or any hot exhaust.Speakers should not be installed where they might inhibit safety features on the vehicle (i.e. lights, horns, brake levers, etc…).

Power Supply Connection

Option AConnected to Battery through a 12 VDC SPOT Relay (Single Pole Double Throw) NOT INCLUDED, SOLD SEPARATELY.
Option BConnected to Battery through a Waterproof Switch (250V AC/6A) NOT INCLUDED, SOLD SEPARATELY.