Boss Motorcycle Speaker User Manual

Boss Motorcycle Speaker User Manual

MCBC425BA Motorcycle/DIV Amplified Speaker System

Congratulations on your purchase of a BOSS Audio Systems amplified speaker system. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, for years of listening pleasure.

Thank you for making BOSS AUDIO SYSTEMS your choice for entertainment!

Contents

High-Performance, Weatherproof Speakers ———— 2 PCSSpeaker Clamp Mounting Hardware———————- 1 PAIRRubber Mounting Shims———————————— 4 PCSPower Plug with Fuse ————————————— 1 PCUser’s manual ————————————————- 1 PC

Features

On/Off SwitchAux-In (3.5 mm)Speaker Clamp MountsWeatherproof Volume ControlHigh-Impact, High Temperature Speaker EnclosuresWeatherproof SpeakersBluetooth® Audio Streaming

Installation

  1. Screw the clamps to the bottom of the speakers.
  2. Find a safe, ideal mounting location and fit the clamps over the chosen mounting bars.
  3. Fasten the mounting screws after you review the safety of the mounting location.

Wiring

  1. Remove the seat.
  2. Route the fused power leads to the battery. (keep away from moving parts and/or hot exhaust)
  3. Connect the RED ring terminal to the+ 12V post of the battery.
  4. Connect the BLACK ring terminal to ground post of the battery.
  5. Connect to the connector the white mating connector leading the speaker.

Power Switch

  1. The switch is used to Power On/off the system.
  2. It can be mounted near the volume control for easy access.
  3. Reinstall the seat.

Connections

Note:1. AUX 3.5 female input connector for output of other audio device like mobile phone, MP3, I pod and so on.2. Should use standard 3.5mm 3-pole male plug AUX cable (not included).3. Stop BT connection first when using the 3.5mm AUX input as an audio source input.

Amplifier and Loudspeaker Mounting Installation Reminder

The components and wiring should not be installed around any moving parts, keep away from ignition parts, fuel lines, or any hot exhaust.

Speakers should not be installed where they might inhibit safety features on the vehicle (i.e. lights, horns, brake levers, etc.).

Specifications

Bluetooth

To pair and connect your Bluetooth device to the MCBC425BA Enter Settings> Bluetooth Menu > Search > ” Boss Audio MCBC425BA” >If Prompted to enter a passcode enter: “0000”

NOTES

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

BOSS Audio Systems3451 Lunar Court• Oxnard, CA 93030www.bossaudio.com805-751-4853 Customer ServiceTech Support: www.bossaudio.com/support

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by BOSS Audio Systems is under license. Other trademarks and trade names are those of their respective owners.

[xyz-ips snippet=”download-snippet”]


Posted

in

by