KEY SPECIFICATION3″ Fireplug Vent Model # FP2021
Eave Vents | Model | Size W x L | NFVA Provided | Flanges Available | Flange Definition |
Weight |
FP2021 | 3” diameter | 2 sq in | Flange Front | Flange Front | 2lbs | |
Continuous Soffit and Custom sizes/materials AVAILABLE |
BENEFITS:
- Safety vents that are used in areas prone to wildfires, wind-driven rain, or wind-driven snow.
- Overlapping Baffle Protection (Patented)o Air Flows through normallyo Resists the intrusion of Flames, Embers, Radiant Heat, Wind Driven Rain and Snow
- Approved for use throughout California and beyond
- Anti -Clogging Overlapping Baffles plus 1/16″ mesh plate on back side of vent
- Prevents Rodent Entry
- 20 Year Warranty
- Easy to Install, Retrofit and Paint (comes with pre-drilled holes)
STANDARD MATERIALSASTM A653/A653M- G90 hot-dipped galvanized steel, 26GAASTM D9092- mill phosphatized coating for painting. IF BONDERIZEDASTM b370- Sheet Copper, 16oz and 20oz IF GALVANIZED.025 x.025 hot dipped galvanized 23ga wire mesh
Installation:
See website: www.brandguardvents.com for installation instructions and video. Product is intended to be used only under a roof overhang inserted into 2x blocking/frieze block. It is not intended to be used on a sidewall without a protective roof overhang.
BRANDGUARD VENTS Inc.6 Rancho Circle, Lake Forest, CA 92630T: 949-481-5300E: [email protected]www.BRANDGUARDVENTS.com
[xyz-ips snippet=”download-snippet”]