BRASS MONKEY Fridge& Freezer
BRASS MONKEY Fridge& Freezer
FEATURES
- DC power connections Powered by AC using the AC to DC power adapter
- High-efficiency DC compressor and conversion module
- Dual mode operation (Max & Economy)
- Digital temperature display with adjustable control
- 3 Year Warranty
- 3-stage low voltage battery protection
- USB port to charge USB devices
- Handle and wheels
- APP control Via Bluetooth
BOX CONTENTS
1 x Portable Fridge/Freezer1 x 12/24V Car Cigarette Power Lead1 x 240VAC to 12VDC power adapter
SPECIFICATIONS
Input Voltage: 12/24VDCAverage Power Consumption: 45WPower Consumption: 0.25kw.h/24hrRated Current: 3.8A/1.9ATemperature Range: -20°C to +20°C (with ambient temperature at 2s0c)Refrigerant: R134a 100% CFC & HFC free PUInsulation: Foam insulation
SAFETY
- The installation of DC power sources in a boat must be handled by a qualified electrician
- Make sure to connect power to the suitable voltage socket
- No electrical devices are to be used inside the product
- The product can be powered on only after being unpacked and put on a flat level surface for over 6 hours
- Fridge operating angle:- The fridge can be operated indefinitely at up to 5 degrees, and can be operated at between 6 and 45 degrees for up to 30mins.
- Product must be well ventilated. Ensure there is a minimum of 200mm clearance at the back, and 100mm around the sides
- The product should be in a well-ventilated space, away from heat sources. Try to avoid direct exposure to sunlight
- Keep product stable
- When there is water inside the fridge, do not turn the product upside down to empty. Dry the water with a soft cloth.
- Do not put metal in the air inlet vent, outlet vent, or gap
- Do not connect to other power except 12V /21 VDC, or the 240V AC to 12VDC adapter
- Do not soak the product in water or wash with water
- The product should not be repaired. If there is any issues please consult the place of purchase
- Turn off the product before cleaning to avoid electric shocks or other issues
- Keep product away from wet or humid places
DIMENSIONS
GH-2000
GH-2002
GH-2004
OPERATION
- How to Turn on the Fridge1.Connect to power2.Press button 03.The internal temperature will display and the compressor will start
- SET: Press button Oto enter different modes, ECO (Energy Saving Mode), and MAX (Fast Cooling Mode). Fa ctory setti.n g I.s MAX
- Press button + or – and set the temperature to 20°c ~ -20°C
Oto enter different modes, ECO (Energy Saving Mode), and MAX (Fast Cooling Mode). Fa ctory setti.n g I.s MAXUSING IN CAR
The product has a three-level battery protection function, which not only guarantees the normal operation of the product, but also protect the battery of the vehicle. When in the power-on state, long press SET button for 3 seconds and the display screen flashes H, select low voltage production L(ow), M(edium), and H(igh) by clicking SET button. The factory default is set to H(igh) protection.
H should be set when the product is connected to car power, and M or L should be set when it is connected to a portable battery or other back-up battery. Because of the different output voltages between vehicles, the battery gear can be set from H to M or from M to L if there is a voltage protection code F1 shown on the panel. The battery gear should be set to H if the product will keep working after turning off the car engine, or the product may drain the battery.
SMART CONTROL FRIDGE APP APPLICATION INSTRUCTION
Downloading the 11BRASS MONKEY FRIDGE11 Application
- Using a pre-installed QR reader on your handheld smart device scan the QR code in the manual or search for 11BRASS MONKEY FRIDGE11 App Store (for Apple devices) or Google store (Android Devices).
- Start the application and select the 11Search II function.
- The application will prompt you to pair the fridge by pressing the 11set button on the fridge •s control panel. Once 11set button has been activated, the fridge will be paired with your smart device and the application will switch to a control panel allowing you to control the fridge •s functions.
Please scan the QR code to download APP
QR Code for Apple Devices QR Code for Android Devices
CLEANING & MAINTENANCE
- Do not wash the product with water or soak.
- Please disconnect from power before cleaning the product to avoid electrical shock.
- Drain the product simply by removing the plug at the bottom.
- Clean it with a soft wet cloth
If you will not use the product for a long period of time, ensure you:
- Turn it off and disconnect from power.
- Remove everything from inside (food, drinks, etc)
- Drain any remaining water by removing the drain plug, then wipe all internal surfaces with a soft cloth to ensure that they are clean and dry.
- Keep it stored away from wet or humid places.
TROUBLESHOOTING
- The product is not working:– If using the 240VAC to 12VDC adapter check the power supply is working– If using the DC cable please ensure the cable still works.– Check the power supply is working– Check if the plug and socket are connected– Check the fuse– Check power switch on control panel is on– Compressor starts delay protection for 3 minutes after turning on
- Food inside the product is frozen:– Temperature is set too low
- Water flowing sound inside the tank:– Refrigerant is flowing, this is normal
- Water drops around the case or door gap:– When moisture in the air meets the lower temperature case, it will naturally become liquefied and condensed. Wipe away with a towel or soft cloth
- Code F1 displayed:– Low voltage protection, which can be solved by setting the battery protection button from H to M or from M to L
- Code F2 displayed:– Fan overload protection. Please turn off the product and restart itafter 30 minutes. If the code displays again, please contact the place of purchase
- Code F3 displayed:– Compressor frequent start protection. Please turn off the product and restart it after 30 minutes. If the code displays again, please contact the place of purchase
- Code F4 displayed:– Compressor is overloaded or working at a low speed. Please turn off the product and restart it after 30 minutes. If the code displays again, please contact the place of purchase
- Code F5 displayed:– High temperature compressor module protection. Please move the product to a ventilated area and turn it off for 30 minutes then restart it. If the code displays again, please contact the place of purchase
- Code F6 displayed:– No parameter can be detected by the controller. Please restart the product. If the code displays again, please contact the place of purchase
- Code F7 / F8 displayed:– Temperature sensor error protection. Please check the sensor terminal
The warranty for this product is 3 years from date of purchase. During the warranty period the following are excluded from coverage:
- Intentional damage
- Damage by fire, flood, etc
- Damage or malfunction caused by incorrect usage and not following this user manual
- Damage or malfunction caused by disassembling
DOWNLOAD RESOURCES
- [pdf] User Manual Fridge Freezer, GH2002
- Read more:
FAQ’S
The battery can last for up to 24 hours depending on the temperature inside the fridge.
It takes about 5 hours to fully charge the battery.
It weighs about 35kg.
You’ve got your power button there and your settings button here is where you’re set for your. High. Low or medium. Right battery protection.
Average power consumption over 24 hours is 0.2kWh.
Fridge operating angle:- The fridge can be operated indefinitely at up to 5 degrees, and can be operated at between 6 and 45 degrees for up to 30mins.
Using a pre-installed QR reader on your handheld smart device scan the QR code in the manual or on the carton, or search for “BRASS MONKEY” application in iTunes App Store (for Apple devices) or Google store (Android Devices). Connect the fridge to power and switch it on using the control panel.
Press “+” or “-” to adjust the temperature. 6.In the power on state, long press the buttons “+” button and for 3 seconds to turn the left zone on or off, and press and hold the buttons “-” and ☀ for 3 seconds to turn the right zone on or off for 3 seconds. Note: You cannot set both zones off at the same time.
Home / Hotel: Use AC adapter to charge unit from AC outlet.Car / Boat: Use DC port to power the fridge and charge the battery.
F1 means the battery is low, please try it with 110V power, if under 110V circumstance it works fine, it means you need to recharge the car battery.
Clean the appliance inside and out with a damp cloth once a week. If it is dirty, using sodium bicarbonate dissolved in lukewarm water can be used to clean. Never use abrasive products, detergents or soap. After washing, rinse with clean water and dry carefully.
When in the power-on state, long press SET button for 3 seconds and the display screen flashes H, select low voltage production L(ow), M(edium), and H(igh) by clicking SET button. The factory default is set to H(igh) protection.
[xyz-ips snippet=”download-snippet”]