M1
Product parts
■ Please fully charged before first use!
■ Press and hold it 2s to turn on and press it again to turn it off.
■ LED status indicators
|
Status of machine |
LED | |
| Working | Fully charged | Solid white |
| Low battery | Fast flashing red light | |
| Run out | Red light turn off | |
| charging | On charging | Slow flashing red light |
| Full charged | Solid red |
Notice: Do not to n on the vacuum cleaner while charging.
2 in I suction nozzle |
Combinationcrevice |
Hose nozzle |
Hose |
Blow/suction nozzle |
hand pump tool |
2 in 1 nozzle with brush |
2 in 1 nozzle without brush |
Suction
Blowing
Vacuum compression bag
Cleaning and maintenance
Empty debris with a single touch of a button—no getting your hands dirty.
Open the dust cup by rotating in the direction of the arrow and take out the filtration parts; Remove the HEPA filter in the direction of the arrow.
Wash the filters and dust cup, air-dry them completely and reassemble the filters.
A Dot n \ot wash the motor housing.
A good rule of thumb is to change your high-performance filter every 3 months.
[xyz-ips snippet=”download-snippet”]