brinno Camera Extender Kit BCC2000 User Guide

QUICK GUIDEAFB 1000Camera Extender Kit ( for BCC2000 )

WHAT’S IN THE BOX

1. Multi-task Dongle ACB1000 x 1
2. 49ft (15m) Ruggedized USB-C Cable x 1
3. Mounting Adapter x 1
4. Cable Clip x 1
5. Cable Ties x 10 (to secure cable path)

INSTALLATION

1. Insert 16 AA batteries into the Power Housing Battery Slot (ATH2000).
2. Plug the Multi-task Dongle (ACB1000) into your camera (TLC2000).
3. Screw your camera onto the Mounting Adapter.
4. Pass the USB cable through the bottom of your Power Housing (ATH2000).
5. Use the circled cable direction to ensure the best performance.
6. Use the Cable Clip on the inside bottom of your Power Housing to secure the cable and ensure that a waterproofing seal is maintained.
7. Slide the Mounting Adapter into drawer number 3 of the Power Housing. It is magnetic and will stick into place.Connect the Cables
8. Plug Cable 1 Into the Multi-task Dongle using the left-side port. Use the other end of the Cable to plug into your laptop.
9. Plug the Battery Slot Mirco USB connector 2 into the right-side port.
10. Check that “USB Connect” is shown on your camera LCD screen to confirm that the cable is installed correctly.
11. Installation finished. Close and lock your Power Housing.

Tip

Use Cable Ties as needed to secure the cable into place.

Download files

Simultaneous Record & Download No need to stop recording. Uses default file explorer to download files – no app required.Note Download function only available for completed AVI files. For example, if you are filming in the daily mode you will only be able to download files from previous days.

Brinno Command Center

Windows 10 UsersUse the link below to download the Brinno Command Center.

www.brinno.com/support/support-center/A181000

Official Site: www.brinno.com