BUFFALO GH227 Red 5.7 Litre Soup Kettle Instruction Manual

BUFFALO GH227 Red 5.7 Litre Soup Kettle Instruction Manual

Safety Tips

  • Position on a flat, stable surface.
  • A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product.
  • Consult Local and National Standards to comply with the following:
    • Health and Safety at Work Legislation
    • BS EN Codes of Practice
    • Fire Precautions
    • IEE Wiring Regulations
    • Building Regulations
  • DO NOT immerse the appliance in water.
  • DO NOT clean with jet/ pressure washers.
  • DO NOT move or carry the appliance when it is switched on.
  • DO NOT operate the appliance without water in the outer container.
  • Keep the lid closed when not serving.
  • Suitable for indoor use only.
  • Always switch off and  disconnect the power supply to the appliance when not in use.
  • This appliance must only be used in accordance with these instructions and by persons competent to do so.
  • Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities.
  • If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified technician in order to avoid a hazard.
  • Caution! Hot surface!
  • BUFFALO recommend that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack  of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • BUFFALO recommends that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device).

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your BUFFALO product.

Pack Contents

The following is included:

  • BUFFALO Soup Kettle
  • Top Ring
  • Kettle Liner
  • Lid Assembly
  • Instruction manual

BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage.

Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.

Installation

Remove all packaging and dispose of safely. Wash Liner, Top Ring and Lid in warm soapy water, rinse in clean water then dry thoroughly.

Operation

  1. Connect the appliance to the mains power supply.
  2. Partly fill the Body with water (water level should be between the Min and Max fill lines).
  3. Place the metal collar on the body of the kettle, then place the inner liner inside the Body of the soup kettle (The inner liner should sit on top of the metal collar).
  4. Pour the hot soup or food in to the Liner, then position the Lid on the Top Ring.
  5. Switch on electricity at socket.
  6. Start heating by rotating the control knob clockwise, indicator light will come on and stay on until selected temperature is reached.Power will come on to start heating again when the temperature of the kettle falls.
  7. To turn the appliance Off, set the Temperature Control to ‘0’.

WARNING: Never move or carry the appliance when it is switched on or contains hot liquid.

Cleaning, Care & Maintenance

  • Disconnect from electricity supply, allow to cool before emptying the water from the Body, always use fresh water when the kettle is to be used.
  • Always wash the Kettle Liner, Top Ring and Lid after every use. Wipe both exterior and interior of the Body to remove any food residues, do not immerse the Body in water or clean with a pressure washer.
  • Dry thoroughly after cleaning.

De-scalingIn hard water areas lime scale can build up within the appliance after prolonged use. For best taste and extended appliance life, de-scale it regularly. Installation of a water filtration system is also recommended.To de-scale the appliance.

  1. Remove the lid and inner container first.
  2. Pour a solution of de-scaler and water into the outer container.
  3. Follow the manufacturer’s instructions on the de-scale solution with reference to the length of time required to soak, agitation, water temperature and on how to dispose of the solution safely.
  4. Fill the outer container with clean water and turn the appliance On to flush out the system. Flush out the system thoroughly to remove any de-scaler residue.
  5. The appliance is now ready for use.

Note: Use a suitable de-scaler and always follow the manufacturer’sinstructions.BUFFALO recommend that this appliance is de-scaled every 3 months or more frequently in hard water areas.IMPORTANT: Failure to de-scale or maintain will invalidate your guarantee.

Technical Specifications

Model

GH227

Voltage

 220-240V~ 50/60Hz
Power

300W

Current

 1.3A
Capacity

5.7L

Dimensions H x Ø mm

 348 x 255
348 x 255

348 x 255

Troubleshooting

Fault Probable Cause Solution
The unit is not working The unit is not switched on Check the unit is plugged in correctly and switched on
Plug and lead are damaged Call BUFFALO agent or qualified Technician
Fuse in the plug has blown Replace the plug fuse
Power supply Check power supply
Internal wiring fault Call BUFFALO agent or qualified technician
Indicator light comes on but unit does not heat up Heating element has failed Call BUFFALO agent or qualified technician
Thermostat has failed Call BUFFALO agent or qualified technician

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead.

The plug is to be connected to a suitable mains socket.

This appliance is wired as follows:

  • Live wire (coloured brown) to terminal marked L
  • Neutral wire (coloured blue) to terminal marked N
  • Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed.

If in doubt consult a qualified electrician.

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

BUFFALO parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.

BUFFALO products have been approved to carry the following symbol:

report this ad

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO.Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , , , ,