First Base® Bump Cap
Bullard Gorra First Base®
Introduction
The FBBC line of First Base caps provides protection from minor bumps or scrapes to the head. The FBBC does not provide protection against impact or falling objects and should never be used instead of an industrial safety helmet.
WARNING
This bump cap is NOT a safety helmet. It is NOT for use as a baseball safety helmet or other sporting event equipment. Use of this bump cap in place of a safety helmet could result in death or serious injury.
Adjustment
Adjustment of the First Base cap is similar to any baseball cap. Simply lock the multiholed bar strap to the pinned strap at the required position (see Figure 1).
An optional foamed disc head spacer is supplied with each First Base cap for additional comfort and protection. The foam disc is easily fitted to the inside center of the Low Density Polyethylene (LDPE) shell by using the self adhesive tape (see Figure 2).
Figure 1
NOTE
Unauthorized cap alterations are not recommended nor is the use of the inner shell with any other hat or cap. Combined use with any components other than those manufactured by Bullard could result in inferior performance.
Figure 2
Maintenance
– The cap shell should be checked each day before wearing to ensure that there are no major surface defects such as crazing, cracks, deep scour marks, discoloration, or dents to the inner (LDPE) shell. Particular attention should be given to the adjustment strap which guarantees secure attachment upon impact. Any defects to the cap, adjustment strap, or the inner (LDPE) protective shell must result in immediate disposal and total cap replacement.
– For optimum performance, ensure both the outer cap and inner shell are correctly maintained, cleaned, and free from defects.
– Do not apply tape, paint, solvents, adhesives, or self adhesive labels to the shell. Any such applications may reduce the effectiveness of the cap.
– Clean the (LDPE) shell with a mild soap and warm water only. The cap material should be brushed or wiped clean with a damp cloth. Do not use laundry detergents.
California Proposition 65 WARNING
Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Bullard Center
2421 Fortune Drive
Lexington, KY 40509 • USA
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-246-0243
Americas Operations
1898 Safety Way
Cynthiana, KY 41031 • USA
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-234-8987
Bullard GmbH
Dieselstrasse 8a
53424 Remagen • Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829
Bullard Asia Pacific Pte. Ltd.
51 Changi Business Park Central 2
#03-04 The Signature
Singapore 486066
Tel: +65 6745 0556
©2020 Bullard. All rights reserved.
First Base is a registered
trademark of Bullard.
6026009638E (1020)
First Base Bump Cap User Manual – First Base Bump Cap User Manual –
[xyz-ips snippet=”download-snippet”]