Bushnell 201760 Laser Rangefinders Tour V4 Shift
Overview
CONGRATULATIONS ON YOUR PURCHASE OF THE BUSHNELL® TOUR V4™ SHIFT INCORPORATING PINSEEKER™ TECHNOLOGY WITH JOLT™.The TOUR V4 SHIFT is a precision Laser Range finding optical instrument designed to provide many years of enjoyment. This booklet will help you achieve optimum performance by explaining its adjustments and features as well as how to care for this precise laser range finding optical instrument. To ensure optimal performance and longevity, please read these instructions before using your TOUR V4 SHIFT.
INTRODUCTION
Your TOUR V4 SHIFT is Bushnell’s newest addition to an award winning line of golf laser rangefinders specifically made for golfers. TOUR V4 SHIFT features PinSeeker™ technology with JOLT™, allowing the golfer to easily and quickly “zero” in on the flag without acquiring background targets. The TOUR V4 SHIFT weighs a mere 5.6 ounces and made to fit into the palm of your hand. TOUR V4 SHIFT also features an adjustable eyepiece, 5X magnification, and is capable of providing distance from 5 to 1000 yards with incredible one yard accuracy! Like other Bushnell laser rangefinders, the TOUR V4 SHIFT is not dependent upon reflectors, and will provide distance to trees, bunkers, and virtually any object on any golf course in the world.
HOW OUR DIGITAL TECHNOLOGY WORKS
The TOUR V4 SHIFT WITH PINSEEKER emits invisible, eye safe, infrared energy pulses. The TOUR V4 SHIFT’s Advanced Digital microprocessor and ASIC chip (Application-Specific Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated digital technology instantaneously calculates distances by measuring the time it takes for each pulse to travel from the rangefinder, to the target, and back.
RANGING ACCURACY
The ranging accuracy of the TOUR V4 SHIFT is plus or minus one yard/meter under most circumstances. The maximum range of the instrument depends on the reflectivity of the target. The maximum distance for most objects is 700 yards/640 meters while for highly reflective objects the maximum is 1000 yards/914 meters. Note: You will get both longer and shorter maximum distances depending on the reflective properties of the particular target and the environmental conditions at the time the distance of an object is being measured.
The color, surface finish, size and shape of the target all affect reflectivity and range. The brighter the color, the longer the range. Red is highly reflective, for example, and allows longer ranges than the color black, which is the least reflective color. A shiny finish provides more range than a dull one. A small target is more difficult to range than a larger target. The angle to the target also has an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the flight path of the emitted energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely, very sunny days will decrease the unit’s maximum range.
GETTING STARTED
REPLACING THE BATTERYYour TOUR V4 SHIFT comes with a battery already installed, so it’s ready to use right away. To replace the battery, remove the battery cap by lifting the battery cap tab and then rotating counter clockwise. Insert a CR-2 3-volt lithium battery into the compartment negative end first, then replace the battery cap.
NOTE: It is recommended that the battery be replaced at least once every 12 months.Low Battery Indicator: When one bar is shown on the battery icon, the battery is low and should be replaced. If the battery goes below the safe operating level (affecting accuracy of readings), the battery icon will flash and the unit will not range.
ADJUSTING THE EYEPIECEYour TOUR V4 SHIFT is constructed with an adjustable eyepiece (+/- 3 Diopter Adjustment) that allows one to focus the LCD display relative to the image. Simply rotate the eyepiece until the reticle and object distanced to are both in focus to your eye.
OPERATIONAL SUMMARY
While looking through the 5x eyepiece, depress the POWER/FIRE button once to activate the in-view Liquid Crystal Display (LCD). Place the aiming circle (located in the center of the field of view) upon a target at least 5 yards away, depress and hold the POWER/FIRE button down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the POWER/FIRE button. The crosshairs surrounding the aiming circle will disappear once the POWER/FIRE button has been released (i.e. the laser is no longer being transmitted).
Note: Once activated, the LCD will remain active and display the last distance measurement for 10 seconds. You can depress the power button again at any time to distance to a new target.
As with any laser device, it is not recommended to directly view the emissions for long periods of time with magnified lenses. The maximum time the laser is transmitted (fired) is 5 seconds. To re-fire, press the POWER/FIRE button down again.
LIQUID CRYSTAL DISPLAY (LCD) INDICATORSYour TOUR V4 SHIFT ’s LCD incorporates illuminated icons or symbols that indicate the selected unit of measure, when the laser is actively firing, when a target has been acquired, and targeting modes. A summary of these features follows:
MODE and UNIT OF MEASURE OPTIONSThe TOUR V4 SHIFT can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters (for details on the Slope feature, see “About Tour V4 Shift with Slope Technology”). When the units you want to use are displayed, release the POWER/FIRE button to select it. If you are changing from yards to meters, a change in unit of measure will be indicated by the illumination of the M for meter indicator while the Y for Yard indicator is turned off. If you are changing from meters to yards, the opposite will occur. The TOUR V4 SHIFT will return to the last unit of measure setting used each time the unit is turned on.
ACTIVE LASERCrosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the POWER/FIRE button. The crosshairs surrounding the circle will disappear once the POWER/FIRE button has been released (i.e. the laser is no longer being transmitted).
PinSeeker (LCD Indicator – ) Ever have trouble getting distance to the flag? This advanced mode acquisition of the flag without inadvertently getting distances to background targets (i.e. trees) stronger signal strength.
TIP: While pressing the POWER/FIRE button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that you are only displaying the closest of the objects recognized by the laser.
About JOLTThe JOLT feature provides a vibration signal (similar to setting a cell phone to “vibrate”) that will be felt when the Pinseeker technology indicates the flag has been detected and the distance to it is displayed in the LCD.
About TOUR V4 SHIFT with Slope Technology
The advanced and patented slope technology found on the Tour V4™ Shift features a built-in accelerometer-based inclinometer that digitally displays the exact slope angle from -20 to +20 degrees of elevation. The Tour V4 Shift will automatically compute an angle compensated range based upon distance and slope angle determined by the laser rangefinder and built-in inclinometer. This data is then combined with internal algorithmic formulas dealing with average club use and ball trajectories. The angle compensated range provides direction on how to play the shot (i.e. add distance if an incline, subtract distance if a decline).
HOW TO USE SLOPE +/-™
The Tour V4 Shift makes changing in and out of slope easier than ever. To utilize the slope function, simply slide the Tour V4 Shift logo so that “Slope Edition” is visible. To make the device conforming again, simply move the logo down.
OBTAINING SLOPE YARDAGES +/-Once in “Slope” mode, simply hold the POWER button down while holding the aiming circle on the flag and keeping the unit as steady as possible. Once the distance is displayed, release the POWER button. Once you have released the power button, a degree of angle and compensated range will be displayed.
The Advantage of Slope Technology
The distance to flag A in the drawing below is 162 yards. It is also 162 yards to flag B although it is on a slope.However, if you were to play this hole as 162 yards, the ball (X) would fall short of the hole/flag because you did not take slope into account. The compensated distance would be longer. In this example, the compensated distance would be 173 yards. If Slope is enabled, the display would show 162y in the upper (large) digits. The lower (smaller) digits would alternate between the angle (4o) and the compensated distance (173y).
OPTICAL DESIGN
Magnification and CoatingsThe TOUR V4 SHIFT features 5x magnification and Multi-Coated optics. A liquid crystal display (LCD) is mounted within the optical system and when activated, displays a reticle for targeting, yards/meters, and Mode indicators. Inherent in the manufacturing process are small black spots that appear in the optical system. These are a natural characteristic of the LCD and cannot be fully eliminated in the manufacturing process. They do not affect the distancing performance of the unit.
SPECIFICATIONS:
Dimensions: Measuring 4.1 x 3.1 x 1.6 inchesWeight: 5.6 oz.Ranging Accuracy: +/- 1 yardRange: 5-1000 Yards / 5-914Meters Magnification: 5xObjective Diameter: 20 mmOptical Coatings: Multi-CoatedDisplay: LCDPower Source: 3-volt lithium (included)Field Of View: 420 ft. @ 1000 yardsExtra Long Eye Relief: 17mmExit Pupil: 4.0 mmIncludes battery & carrying case
CLEANING
Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or fingerprints, clean with a soft cotton or microfiber cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.
TWO-YEAR LIMITED WARRANTY
Your Bushnell product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.Any return made under this warranty must be accompanied by the items listed below:
- A check/money order in the amount of $10.00 to cover the cost of postage and handling.
- Name, address and daytime phone # for product return.
- An explanation of the defect.
- Copy of your dated proof of purchase.
Do not send in accessories (batteries, case, etc.), only the product for repair.Product should be well packed in a sturdy outside shipping carton to prevent damage in transit, and shipped to the address listed below:
IN U.S.A. Send To:Bushnell Outdoor ProductsAttn.: Repair s9200 CodyOverland Park, Kansas 66214
IN CANADA Send To:Bushnell Outdoor ProductsAttn.: Repairs140 Great Gulf Drive,Unit B Vaughan,Ontario L4K 5W1
For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information.
NOTE: Your Bushnell Golf Laser Rangefinder should have a sticker with serial number on the outer package and on the product (see below). These serial numbers are used to ensure you are purchasing the unit from an authorized dealer. If you are unable to locate this sticker or if the serial number has been obscured, the product may not be authentic (counterfeit) or it may not have been purchased through an authorized dealer. In either case, Bushnell will not honor warranties on these products. You should return the unit to the seller for a refund, and purchase your rangefinder from an alternate location.For a list of authorized dealers, please visit www.bushnellgolf.com
TROUBLESHOOTING
If unit does not turn on – LCD does not illuminate:
- Depress POWER/FIRE button.
- Check and if necessary, replace battery.If unit does not respond to key presses, replace the battery with a good quality 3 volt lithium battery.
If unit powers down (display goes blank when attempting to power the laser):
- The battery is either weak or low quality. Replace the battery with a good quality 3 -volt lithium battery.
If target range cannot be obtained:
- Make sure LCD is illuminated.
- Make sure that the POWER/FIRE button is being depressed.
- Make sure that nothing, such as your hand or finger, is blocking the objective lenses (lenses closest to the target) that emit and receive the laser pulses.
- Make sure unit is held steady while depressing the POWER/FIRE button.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim at the new target using the LCD’s reticle, depress the POWER/FIRE button and hold until new range reading is displayed.
Specifications, instructions, and the operation of this product is subject to change without notice.
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.
FDA SAFETYClass 1 laser product in accordance with IEC 60825-1:2007.Complies with 21 CFR 1040.10 and 1040.11 for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.Caution: There are no user controls, adjustments or procedures. Performance of procedures other than those specified herein may result in access to invisible laser light.
References
[xyz-ips snippet=”download-snippet”]