CALIBER HBT-BR30 RGB and White Color Bluetooth Mesh Smart Lamp User Manual

Table of Contents

HBT-BR30-STARTPACKUser Manual

SPECIFICATIONS HBT-GATEWAY

Smart gateway for Caliber’s HBT-devices
Free “Caliber SMART HOME” app
Wireless Protocols – BLE MESH (SIG) and Wi-Fi freq. 2.4GHz
110-240V-, 50/60Hz
Add up to 127 BLE Mesh Caliber Smart Home devices
Device Sharing
Hacker proof IS027017:2015

SPECIFICATIONS HBT-BR30

Smart LED light
Free “Caliber SMART HOME” app
Wireless Protocol – BLE MESH (SIG)
110-240V–, 50/60Hz
E27 Fitting
Lumen: 720
Watt: 9
Remote-controlled & Dimmable by Caliber Smart Home App and/or HBT-Dimmer
Color temperature warm – cool white light: 2700K – 9000K
Adjustable Colored RGB light
Voice Control works with ‘Hey Google’, `Amazon Alexa’ or ‘Hey Siri’
Set timers, Schedules, Make scenes, Groups, Automations, etc.
Device Sharing
Hacker proof IS027017:2015

Overview

Reset button or distribution network button
RED LED indicator (for WiFi):

LED ON: Indicates WiFi is connected
LED Blinking: Indicates WiFi needs to be connected (Pairing mode)
LED OFF: Indicates WiFi is not connected.

BLUE LED indicator (for Bluetooth):

LED ON: Indicates Bluetooth is activated
LED Blinking: Indicates pairing mode to add a Caliber Smart Home HBT device
LED OFF: Indicates Bluetooth not activated

Light bulb
Watt CCT / RGB	9W / 4W
Lumen	720
Color Temp	RGB + 2700 – 9000K
Dimensions in mm	H130, 0103
Start	Instant < 1s
60%	< 1,0s
ON/OFF	10.000x
Lifespan	20.000h
CRI (Ra)	>80
Power Factor	0.56
Base	E27
	Dimm by app

Safety

Do not open the devices. Only use the appliances for their intended purpose. Do not use the appliances if they are damaged or defective. In this case, replacement is required. these appliances are intended for indoor use only. Do not use the appliances outdoors.

Getting started

Download the ‘Caliber Smart Home’ app from the Google play store, the Apple Store or scan the QR code (rear side of this manual).
Open the app First-time users need to create an account. Follow the on-screen Add the HBT-Gateway by touching ‘add device’ (+), on the top right corner of the screen, choose your device type and follow the on-screen instructions.
Plug in the HBT-Gateway to a mains socket The HBT-Gateway will power on and the RED indicator LED will start flashing. (If it doesn’t flash, press and hold the Reset button for 3 sec. to reset the Gateway).

Follow the on-screen instructions to finish the installation.

Add device(s)

Add devices to the HBT-GatewayA. Select the HBT-Gateway from the list of devices in the ‘all devices menu’.B. Choose ‘search new device’ and proceed with step 2.C. Already installed BT Mesh devices can be added to the HBT-Gateway by choosing ‘add the device by list’1.1 Having trouble finding an HBT-lamp? Try resetting it.Install the lamp and turn it ON, the lamp will start flashing. [If it doesn’t flash, turn it OFF-ON (2sec)-OFF(2sec)-ON(2sec)-OFF(2sec)-ON (keep on) to reset the device]
Follow the on-screen instructions to finish the installation

Go to SUPPORT.CALIBEREUROPE.COM and enter the model number in the search area to find additional information.

We are continuously improving/updating our products and product information. It’s, therefore, possible that there is a slight difference between the description in this manual to the operation of the product.

If something is different or not clear; always check our website for the most current version. The images used are indicative and may vary per device and version.

Some words in the manual may vary in translation from the exact words used in the app.

Caliber hereby declares that the item HBT-Gateway & HBT-BR30 is in compliance with the essential requirements and other relevant provisions of Directive 2011/65/EU (RoHS) and 2014/53/EU (RED

The latest declaration form can be found at:calibereurope.cominlmedia/forms/DeclarationHBT-Gateway.pdf calibereurope.cominlmedia/forms/DeclarationHBT-BR30.pdf