CALIBER HBT-DIMMER Bluetooth Mesh Dimmer User Manual

Table of Contents

HBT-DIMMERUSER MANUAL

SPECIFICATIONS

Smart Bluetooth-mesh dimmer-switch for Caliber HBT-Lights
Free “Caliber SMART HOME” app
Wireless Protocol – BLE MESH (SIG)
Power Supply via built-in battery
Battery model – CR2032 (220mAh)
Wireless Standard – BLE 0 (BLE 4.2 compatible)
Working frequency – 2.4GHz
RX sensitivity – -92dBm
Standby time – 18 months
Indicator LED – indicate Bluetooth configuration and operation feedback
Connect up to 127 lights
Hacker proof IS027017:2015

Bluetooth® mesh Dimmer-switch.Model No.: HBT-Dimmer

Easy Installation with the free and intuitive Caliber Smart Home app. Control up to 127 Caliber HBT lights with the HBT-Dimmer.

Overview

Rotary Knob functions:Short press: switch ON / OFF the connected lightsRotate: adjust the brightness of the connected lightsLong press: adjust the color (RGB) of the connected lights

Press + Rotate: adjust the color temperature of the connected lights Place the HBT-Dimmer on the table or place it anywhere on the wall. On the rear side of the dimmer, there is self-adhesive tape to stick it on the wall.

Safety

Only use the appliance for its intended purpose. Do not use the appliance if it is damaged or defective. In this case, replacement is required. This appliance is intended for indoor use only. Do not use this appliance outdoors.

Please remove the battery insulation sheet before using it. To open the HBT-Dimmer, use a flat-blade screwdriver.

Getting started

Download the ‘Caliber Smart Home’ app from the Google play store, the Apple Store or scan the QR code (rear side of this manual).
On the HBT-Dimmer remote control: Press and hold the pairing button for more than 5 seconds, the remote control is in pairing mode.
Open the appFirst-time users need to create an account. Follow the on-screen instructions.A) Add this device by touching ‘add device’ (+), on the top right of the screen, choose ‘BT Mesh device’.B) Or add this device to the HBT-Gateway: Open the ‘Caliber Smart Home’ app. Add this device to the HBT-Gateway menu by tapping on: ‘search new device’.
Follow the on-screen instructions to finish the installation.

Add lights to the HBT-Dimmer

Add lights to the HBT-Dimmer

In the Caliber Smart Home app, select the HBT-Dimmer from the ‘all devices menu’ and choose ‘configure group A’
Add (/remove) all the desired lights to the group and press confirm.

Go to SUPPORT.CALIBEREUROPE.COM and enter the model number in the search area to find additional information.

We are continuously improving/updating our products and product information. It’s, therefore, possible that there is a slight difference between the description in this manual to the operation of the product.

If something is different or not clear; always check our website for the most current version.

The images used are indicative and may vary per device and version.

Some words in the manual may vary in translation from the exact words used in the app.

Caliber hereby declares that the item HBT-DIMMER is in compliance with the essential requirements and other relevant provisions of Directive 2011/65/ EU (RoHS) and 2014/53/EU (RED)

Latest declaration form can be found at: calibereurope.cominlmedia/forms/DeclarationHBT-Dimmerpdf