CANYON CND-GPW3 Wireless Gaming Pad User Manual

Table of Contents

CANYON CND-GPW3 Wireless Gaming Pad

Dear Customer!

Congratulations on purchasing the premium quality CANYON product!We are happy to present to you our gaming accessories, which are the combination of new technology and fresh design.Our own design bureau implements the latest trends in fashion and design, while our scrupulous quality control system ensures a long life of CANYON products.To take full advantage of this product, we recommend you to read this manual completely.Have a good time with our product!

Device overview

Device overview
A	Back button
B /H	Left analog stick Right analog stick
C	8D Direction pad
D	Turbo button setting: 1. Hold the key to which you want to apply the turbo function while not releasing it, press the turbo button once. The backlight will flash red if set successfully. 2. To cancel this function, hold the key to which you applied the turbo function and do not release it and then press the turbo key once. The backlight will turn blue 3. The following keys can be used for the TURBO function: A, B, X, Y, LB, RB, LT, RT.
E	Start button
F	Home button Hold the «Home» button for 5 seconds to turn the device off 1.Home button is used to change the operation mode. 2. Home button can be used to exit the game and return to the home page.
G	The function keys :A,B,X,Y A, B, X, Y backlight LEDs. Hold down L + R for 5 seconds to turn off or turn on the LED backlight.
I	Channel LED indicators
J	Backlight 1. When starting up normally, blue backlight is on. 2. When TURBO function is activated, the red backlight is on.
K	LB/RB buttons/triggers
L	LT/RT buttons/triggers
M	USB type C
N	RESET switch

Technical specifications

Technical specifications
Compatible with	Nintendo switch console, PC, PS3, Android.
Operation range	up to 10 m
Built in Li-polymer battery	600 mA
Charging time	2.5 hours
Playing time	more than 8 hours
Vibration motors	2
INPUT	5V, 500 mA
Dimensions	LWH:15210260.5 mm
Weight	200 g
Operating temperature	-20°C ~ 45°C
Operating humidity	≤55%

PC Xinput /Dinput wireless mode connection Settings:

Press the «HOME» button, for each operation mode, LED1, LED2, LED3 and LED4 will flash in pairs.
Xinput mode: Insert the receiver into the computer USB, the controller will begin to pair with the receiver. LED1+LED4 will turn on if the connection is successful.
To switch the gamepad to the Dinput mode, please hold the HOME key for 5 seconds until LED1 + LED3 are on.

Operation modes LED:If the controller is paired when the battery voltage is lower than 3.5 V, the LED will flash to indicate low power warning and the vibration function will not work.

PC Xinput / Dinput wired mode connection Settings:

Connect the USB cable directly to the computer USB port.
If the connection is successful the LEDs will remain on.
LED1+LED4 – Xinput mode / LED1+LED3 – Dinput mode.

Android wireless / wired mode connection Settings:There are 2 connection modes: 1) Wireless mode: connect the receiver via the OTG line 2) Wired mode: connect the receiver via the OTG cable directly to the USB port of the phone, LED2 + LED 3 lights will turn on to indicate that the connection is successful, if they do not illuminate, hold the HOME key for 5 seconds until they turn on.

Note:

The mobile phone or tablet must support the OTG function and use the OTG cable connection.
The current Android version does not support the controller vibration function.

Channel LED indicators:If the controller is paired,when the battery voltage is lower than 3.5V, LED2+LED3 will flash to indicate low power.

Nintendo switch connection/pair Setting:

On your «Nintendo»,select the menu item Controller – Change Grip and Order.
Insert the receiver directly into the USB 2.0 port.
Press the «HOME» button, LED1, LED2, LED3, and LED4 will flash when paired.When the LED(s) remain on, the connection is successful.

SWITCH mode key layout

Motion sensor can support switch host and use X Y Z axial to control the game

Channel LED indicator:when the battery voltage is lower than 3.5 V, the connected channel LED(s) will flash to indicate low power and turn off the vibration function.

Use the cable connection Settings:

On your Nintendo Switch, select the menu item» System Settings»—-»Controllers and sensors»—-» Pro Controller wired Communication» to turn the wired connection on.
Insert USB cable directly to the Nintendo switch charging dock.
When the channel LED stays on, the connection is successful.

Сhannel indicators

PS3 wireless mode connection Settings:

1. Insert the receiver into the PS3 USB port.2. Press the «HOME» button, for each operation mode LED1, LED2, LED3, and LED4 will flash in pairs, when the connection is successful they will stay on.3. Press HOME to confirm

Channel LED indicator:When the controller is paired and the battery voltage is lower than 3.5v, the connected channel LED(s) will flash to indicate low power and turn off the vibration function.

Channel indicate:
The PS3 connect 7 controllers
Controller number	Glowing LEDs
1	LED1
2	LED2
3	LED3
4	LED4
5	LED1+LED4
6	LED2+LED4
7	LED3+LED4

PS3 wired mode connection Settings:

Insert the USB cable directly into the PS3 USB port.
When the LED is on, the connection is successful.
Press HOME to confirm

Troubleshooting

The gamepad does not work

Check USB connection;
Try to plug gamepad into a different USB port;
Restart computer/console.
Gamepad works well when plugging into a full powered USB port. If you use USB HUB, it must have its own power supply.

The gamepad disconnects when playing a gameCheck your console system is latest version or not, if you updated your system, please download our updated software.

Warranty

This product comes with 24-months limited warranty.
For more information about usage and warranty, please refer to www.canyon.eu/support

Manufacturer: Asbisc Enterprises PLC, Cyprus, Limassol 4103. Diamond Court, 43 Kolonakiou Street. Agios Athanasios. http://canyon.eu/

report this ad

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-31

CANYON

admin

Tags: